Device USB-6009, not found problem

Similar Questions

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.

• device driver Bluetooth not found in windows 7hb update?

  I have not found a bluetooth device driver so please help...

  /

  Hello

  1. What is the number of brand and model of the computer?

  2. What is the message code error that you experience when you try to use the Bluetooth software?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Please follow the steps mentioned below to help solve the problem.

  Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

  Method 1

  Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

  http://support.Microsoft.com/kb/2654568

  Method 2

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Refer,

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps.

• Work around for server not found problems on FF36

  I found a work around for all people with server not found problems with FF36.

  If you manually set your DNS network adapter to an external DNS server (as opposed to your local ISP) then the problem disappears. I set mine to use the google DNS servers:

   Preferred: 8.8.8.8
   Alternate: 8.8.4.4
  

  No idea why this works, but it is 100% success on my desktop PC, whereas before I could not connect to a Web page with FF36 without updating the multiple page and a lot of frustration, although FF35 was fine and back to FF35 turnover was as beautiful.

  Something has changed in FF36 and how it manages the DNS or the mode of operation with certain network cards.

  There is nothing to do with the Add - ons, profiles or software firewall as I tried all these things and that the DNS change makes a difference. I even copied on a full profile and directory of program files to work for Mozilla on my laptop which saw no problem and the problem still exists on the desktop, which is why I started watching the network adapater since everything between the working PC and no work was identical.

  I hope that this will help the developers to identify the real cause of the problem and fix it in the next version.

  AG - your problem looks different you had FF36 work.

  Considering that the problem of many of us that when we spend FF35 in FF36 we get a lot of server is found errors when you try to load Web pages.

  Sometimes they load and then they stop loading and then if you click Refresh a lot that they sometimes then charge again, or you have to wait a minute or two and then they load.

  For some reason any using an external DNS server {see # 698286 answer _{~ J99}} has stopped this problem completely, as does return to FF35.

  We need an expert on to Mozilla DNS resolution to focus on this. [*] ^{See my note under ~ J99} Seems to me that you use an external DNS server adds some latency to name resolution and maybe this is necessary for the network card in the PC that encounter this issue to resolve the addresses of Web page.

  Obviously something changed in FF36 FF35 to cause this problem. I'm open to Mozilla contact me by E-mail if they want me to try something else to help pin it down.

  *

  change Note the John99
  Mozilla can consider WHETHER we are able to provide evidence to support this. We must be able to complete a report of bug with right steps to reproduce (STR). Developers should be able to see themselves the problem before we can expect to focus on this.

• Cq58 Compaq: Compaq CQ58 - device to boot not found

  Compaq CQ58

  Hello

  When you turn on I get

  Not found boot device

  Please install the operating system on your hard drive.

  Hard drive (3f0)

  f2...........................

  visit hp.com...

  And nothing else

  Then I do the "F2" as follows:

  UEFI V 1.6.0.0 - BIOS

  visit...

  ... Past the memory test
  ... Past HD disk check

  I go to f10

  > F9 message load setup defaults > Yes > f10 save and exit > Yes

  No improvement even if there is a life in there cos the disc or the fan turns

  I think the next step is to redo any os USB

  Cannot find links suggested to reboot on HP site - they go absolutely nowhere, unnecessary.

  This is my son's laptop computer

  It loaded windows 10

  a windows 8

  do not know what he was doing, but he said it worked on 10 for a while.

  Why microsoft allow minors to mess up so bad? In any case...

  I don't know if he'll want to restore as windows8 or 10

  I don't know if it's 32-bit or 64-bit in any case

  Who tells us of the f10...

  third line up always suggest windows 8?

  Here is the capture of the f10 camera

  

  All ideas

  No tellings off the power. No closing the stable door once the horse has bolted.

  Means and just before useful suggestions please.

  Thank you very much.

  Concerning

  Wilf's dad

  Hello

  No matter if update 8 - also long as 10 Windows activated successfully, you can use the "clean installation" method

  It is possible that if the machine had just been "updated", the hard stop interrupted files system updated and this can lead to this kind of question.

  As a general rule, a clean installation of Windows 10 has less problems problems/performance than the upgrade from a previous version of Windows.

  Kind regards

  DP - K

• Hosting devices USB with my STOR problem. E TV

  I had my STOR. E TV for about 2 years now, and note this problem since I was.

  Problem: when you host a usb (flash or ext hdd) stor.e tv device detects the device and open the USB key. However when I try to play a file, it starts off the coast of the fine, but about a minute in the picture begins to shift making the file impossible to watch.

  I heard from his colleagues to see if there is updated firmware for the tv stor.e as this may help.

  Please if he would, and where would I go to find it?

  Kind regards
  André

  > I heard by his colleagues to see if there is updated firmware for the stor.e tv because it might help.

  There is no firmware available for television Stor.E
  If you go to
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU
  and choose
  -Options
  -Drive devices
  -Multimedia hard drives
  -3.5 store TV
  you won't find any firmware

  But there is a firmware for Stor.E TV +.
  But I put t think its compatibility with the TV StorE

• No sound, but not found problems.

  I have no sound on my computer. I ran the fix - it tool, and no problem not found. The volume is at 100%. I am open to the control panel and go to Device Manager and opened the audio, video and game controllers to check the status of specific bequests and to search for driver updates. There is no problem with the sound on my computer, and then that I move on and search for new updates, none have been found by the computer and the fix - it tool. I still have no sound. My computer is a laptop, so there is no son to check outside. Help, please.

  I have no sound on my computer. I ran the fix - it tool, and no problem not found. The volume is at 100%. I am open to the control panel and go to Device Manager and opened the audio, video and game controllers to check the status of specific bequests and to search for driver updates. There is no problem with the sound on my computer, and then that I move on and search for new updates, none have been found by the computer and the fix - it tool. I still have no sound. My computer is a laptop, so there is no son to check outside. Help, please.

  In addition to the steps already suggested, I would recommend that you run the DirectX troubleshooter that you can access as follows:

  1. Click on start, then run (press Windows key + R if you do not "run" in the start menu) and copy / paste the following and then click OK: dxdiag
  2. Once the animation is completed loading, click on the "Sound" tab and then click on the button 'Test Direct Sound' and meet the guests accordingly.
  3. If you still hear nothing, click on the "music" tab and try to test each port. By 'port', I mean the options that are available to you which you should be able to see in the list.
  4. If the above results remain negative, click on the tab 'More help' and then click on the "Sound" button This will launch the Windows sounds troubleshooting utility where you will have a number of options to choose from.

  In case it doesn't, try to use the system restore to wind back the clock by one hour when you know that the PC was working properly, to run the system restore, follow these steps:

  1. Click Start | Programs | Accessories | System Tools | The system restore.
  2. Click the option: "Restore my computer to an earlier time" and then click Next. You will get a calendar with a certain number of Restore Points that appear in bold . Choose one where you know audio was working properly.

  System Restore takes a few minutes to run during which the PC will restart. Not to interrupt this cycle. When the PC reboots, it loads the menu of system restore, where you will see a message about whether if the restore was successful or not. Click OK to start the desktop and then try to play something to check if audio works now.

  Know that when you run the system restore, all the programs that you installed after the date that you choose to restore to will need to be reinstalled again. It goes the same for updates and security patches.

• Finger by scanning and mouse ports usb is not found - now! In addition, password does not work!

  My finger swipe and the USB mouse positions is not found - now! In addition, I forgot my password for the unit - VGN-AW120J! I think I have at the office this unit under the username above with a different through Sony password when I buy the unit - some time ago!

  Hi Robert,.

  It seems that the Windows login password has been forgotten and the prints Print sensor in does not.

  In this case, I suggest you to perform a complete system restore to solve the problem. Follow the steps here to perform the system recovery: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C459775

  It is necessary to take backup of all data before performing the system recovery, it clears everything from the computer and restore the computer to factory settings.

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Firefox server not found problem

  When I opened my new links on Google search results pages, sometimes I got the pages 'server not found '. I had to refresh twice like that to get the pages loaded. I searched online solutions and I had tried to disable the antivirus, turn off DNS prefetching, uncheck ' web Sites Tell I won't be subject to a follow-up ", disable IPv6 in Firefox, restart it with disabled modules, but they have all failed. I found that there is no problem to use Google DNS. Help thanks.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

  When you click a link, first check in the small storefront
  at the bottom of the screen. Is it correct? After clicking, you end
  to the top on this page?

• Serial number not found 'problem '.

  When I start my laptop (Compaq Presario CQ71 420E) an apearse messege that says erial number not found.

  Please help me to solve my problem and if it is posible without telling me to go to the nearest HP Service Center.

  Thank you.

  Cost:

  HP Compaq Presario CQ71 420E PC laptop

  Pentium Dual-Core Cpu T4400 2.20 Ghz

  RAM: 4 GB

  64 operating system

  Generally, this error requires a Center.Sorry of Service HP service.

• USB camera not found EXE, IMAQ void VI error running program

  Hi, dear guys and managers on board

  I'm a new engineer in Germany. Recently, I've converted a program of USB camera that is used to read image of LabVIEW 7.1 version to version of LabVIEW 2010 barcode matrix, with LabVIEW 2010, module Vision Development, software vision purchase August 2010 is installed.

  The program works well, and I have generated an EXE file to run the tool on computers without LabVIEW 2010 is installed.

  I installed the runtime LabVIEW 2010, Vision Runtime Engine(evaluation version) and going TO (evaluation version).

  However, when I run this program, I still have this error, saying that "IMAQ Read Data Matrix code bar 2" not found.

  Would someone please so kind to give me any suggestions? Thank you very much!

  
  

• Report text - member not found problem

  Hello

  The problem I have is very similar to this knowledge base entry: http://digital.ni.com/public.nsf/allkb/2FCAAF080951FCAB86256982007AA16C except that I am experiencing on the target with no development environment machine. I installed the runtime Labview 7.1.1 first, then I had to also run a few old 5.1.1 code so I installed the 5.1.1 runtime. I am currently not able to print, I get the following error: Member not found in value Margins.vi-> simple text Report.vi-> printdata.vi...

  Anyone know how to solve this problem without using the development environment?

  Thank you

  Howard Spec

  CMC electronic

  Canada

  Hillman, I think I've solved the printing problem. That's what I did:

  1. from Add/Remove, I uninstalled OR-report

  2. starting at \Shared, I removed the directory NOR-reports

  3. I checked the registry, but there are no records OR reports to remove - if no change here

  4. I did a repair on the 7.1.1 run the engine. Printing from 5.1 seems OK now. I still have more work to do on my new 7.1.1 application, so if I see more problems, you may hear from me again.

  Thanks again,

  Howard

• Another STOP c0000135 WINSRV was not found problem

  Hello.  I have a XP SP3 computer at work that would not start this morning.  The only new event the day before was Firefox update to version 9.  When I stopped this closure, it was a STOP c0000135 THAT WINSRV was not found error.  I looked at all the different solutions on the web and have had no success.  I used a UBCD4WIN boot CD to run the Recovery Console and run chkdsk/r.  I replaced files winsrv.dll user32.dll with different versions of the computer and another similar computer.  I ran fixboot, fixmbr and bootcfg/rebuild.  I tried to restore the registry, but it could not find a return to the top.  Last known good configuration does not work.  So my last hope is to ask if anyone of you more expert that I can think of another solution, another re - install windows.

  Thank you.

  Thank you very much for this.  I swapped the components of the registry, and it made no difference.  However, it led me to the real answer... (!)

  I searched the system32\config folder and realized, of course, that the last time that the .evt files had been updated was when the computer was last working properly.  Research in the system log, I found this:

  File replacement was attempted on the protected system file c:\windows\system32\usp10.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 1.420.2600.5969.

  Then there are similar entries for locale.nls and sortkey.nls sorttbls.nls.

  Then

  The system file c:\windows\system32\sortkey.nls could not be copied into the DLL cache.  The specific error code is 0x800b0100 [no signature was present in the subject.
  ].  This file is necessary to maintain the stability of the system.

  Then

  Sortkey.nls of the protected system file could not be restored to its original, valid version. The file version of the bad file is unknown the specific error code is 0x800b0100 [no signature was present in the subject.
  ].

  Then another attempt on locale.nls.

  Then the event log was arrested.

  I looked on the hard drive, and sortkey.nls was absent from the system32 folder.  There was an oldsortkey.nls dated 2004, as well as two copies of sortkey.nls dated 2005, one in the system32/DLLcache folder and the other in a folder of service pack update.  Given the message on the DLL cache, I copied a 2008 dated from another similar computer file in the system32 folder, and the computer started fine several times, no problem.

  So thanks to three of you for your help - I arrived in the end.

• Presario CQ61 - device to boot not found, say there is no hard

  Hi, I bought my hand 2nd presario CQ61-405AX about a year ago and it was almost new, my laptop was working fine and then it froze and so I had to switch off, once I waited 30 min for it to thaw, now, when I boot it upward, apparently with a black screen with error

  "Boot Device not found.

  Please install an operating system on your hard drive

  F2 system diagnostiscs.

  I went on hp support and followed the instructions until he did a test drive and the error, 'Hard disk not exist' appeared

  I have no idea how to fix this, I am running Windows 7 Home premium and I'm afraid that I might have to buy another hard drive

  Thank you in advance

  Hello

  Unfortunately it looks like the drive didn't, if the replacement is the only option left.

  Kind regards

  DP - K