Crash when disconnecting USB connected to the Steinberg UR-22

Similar Questions

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• El capitan crashes when you are connected to the internet ONLY

  If not connected to the internet, the computer will run all day without any problem, any help would be great, thanks

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

  The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

  Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

  Acrobat Connect Pro data sheet

  I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

  It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

• Help! Fuze heats up when it is connected to the pc...

  Hello

  I recently bought a 4g version black Sansa fuse and I got a little nasty gets hot problem-it when it is connected to the pc or the USB power adapter.

  I know that some readers mp3 or other devices can become hot during charging, but I really don't think that the above 50 ° c temperature is normal (since its even hotter tham my GPU...). Ive noticed a post on anythingbutipod.com where a guy had a same problem, so I just want to ask a few questions he did: is there the "anyone else having this problem as well? Should I worry about this? »

  BTW. My sister uses the same pc (even the same USB port ) to recharge his Creative Zen Stone and it does not seem to warm up. Oh, and the USB power adapter I have has the following specifications output: 5.0V +/-0, 1V and 150mA to 1000mA

  Thank you in advance... and sorry for my bad English (if its bad )

  It is not normal, please contact technical support for replacement or return it.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• gen64.exe Malware when it is connected to the internet

  My desire to HP dv6-7206tx with Windows 8.1 has a problem when it is connected to the internet. An application named 'gen64.exe' makes the CPU to run at 100%. And Microsoft Security Essentials doesn't pick it up as a malware. I checked on the internet to confirm that it is a malware. Please help me. I have no idea how he broke into my laptop.

  Hello

  There are many programs for cleaning system of malware, adware etc which would suggest Members here.

  I like this one to detect & fixing malware: https://www.malwarebytes.org/mwb-download/

  Update latest version & tick "Scan rootkits" before starting the analysis.

  After the scan, quarantine the detected objects. Restart the system. Yet once, open the Malware Bytes program, go to the history tab in there: remove all quarantined items from there

  Restart the system.

  Open the prompt as administrator, do a SFC SCAN, check if integrity violations are:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Concerning

  Visruth

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.