Unrecognized WIC: WIC-1ADSL-DG, 1751 & 12.3 (13)

Similar Questions

• -Cisco 1841

  Howdy,

  I have a Cisco 1841 with two WAN ports to use 0/FE0 FE 0/1

  First FE 0/0 has an MPLS connection with my internet provider. 2MB / 2MB DL/UL

  Second FE 0/1 has a MPLS internal with one of our server's storage providers. 1 MB / 1 MB DL/UL

  The thing is, I have a second Wired internet connection in a router low cost for emergencies. I want to centralize all services in the 1841.

  It is possible to configure the port for a third connection ADSL and load balancing between ADSL1 (FE 0/0) and ADSL2 (future port to THE) 2MB / 2 MB DL/UL

  ( ? )

  Or need another router?

  Thanks in advance,

  Kind regards

  Hi Miguel,.

  You will need the WIC-1ADSL for the WAN connection extra said.

  The port to THE is usually connected to an external modem for remote management.

  Sent by Cisco Support technique iPhone App

• Any bug IOS (ADSL + IPSEC) with Cisco 1721?

  Hello

  I tried to install an IOS image with support ADSL and IPSEC on a Cisco 1721.

  When the router works fine with ADSL, it does not work with IPSEC and vice versa.

  I tried to change the router with a similar 1721, but nothing has changed.

  I tried the following images (I found them with IOS Scheduler) for IPsec:

  C1700-o3sy756i - mz.121 - 3.XP3.bin

  C1700-o3sy756i - mz.121 - 5.YB5.bin

  When I install the versions of IOS, I can't see the ATM interface.

  Have you noticed any IOS bug related to ADSL + IPSEC with the Cisco 1721 versions?

  Thank you

  Paolo

  Hi Paolo

  It comes to the interface card WIC ADSL is not supported in versions of software you tried.

  According to "Software Advisor", the card WIC-1ADSL is supported on the platform of 1721 in the following versions:

  12.2 (13) T, 12.2 (4) AGO, 12.2 (4) 12.2 (4) YH, YJ 12.2 (8), YL 12.2 (8), YM 12.2 (8), YB, YN 12.2 (8)

  So, you will need to get a new image, a crypto of the cause.

  / Michael

• Basic router and PIX during installation of ADSL

  I have a router with a WIC ADSL card 1751, a 506th PIX and a 24 port Catalyst 2950. The office is connected via ADSL with a public IP address. I also have a router ADSL 837 (but I don't think I'll need with the map of ADSL in the 1751). I need to set up a WAN connectivity, a static tunnel site to another and also allow access to the Cisco VPN client. I was wondering if anyone had any suggestions or examples of configurations for me initially on the right track with this. I wanted to also be the router or PIX hand addresses DHCP. In addition, I never configured (ADSL) ATM card into the router. I don't know if I need to assign the public IP address or this bridge for the PIX.

  Thank you very much

  Hello...

  I presume that the firewall is connected to the inside interface of the router. the firewall's default gateway is the IP Address of the ISP router. right? Now, configure the DHCP protocol and other things as said in the previous post...

  On the firewall, all traffic between inside and outside is open. so, you don't connect on an inside vpn server. Let us know if you need more information.

  For site-to-site ipsec tunnel, refer to the following URL.

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801c4445.shtml#configs

  See the configurations on the PIX and replicate in your condition.

  REDA

• WiC: Soviet Assault problem

  I know that WiC is not a game of Microsoft, but I still want to ask the question.   Whenever I am trying to install it, a problem appears and says: LastDllError 1047, Description cannot find window class. Can someone help me?
  

  Hello saw the Nerd,

  It is a kit of expansion for the world in conflict game.  You must have world in Conflict installed in order to use the expansion pack.  If you have the game installed and get this error message when you try to install the expansion pack I'd say contacting Activision for support.  Here is a link to the site from Activision:

  http://www.Activision.com/index.html#home | en_US

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  I know that. I played WiC for 5 months and now I decided to install Soviet Assault. The problem is solved, it was the problem with the dvd. In any case, thank you.

• 32-bit Windows Imaging Component (WIC) download

  I have reinstalled my software on my computer and I was instructed that I must download 32-bit Windows Imaging Component (WIC). There are many downloads with different extensions.  How do you know that one to download?

  Hi Mary,

  The Windows Imaging Component is available in different languages. The one chosen will depend on the language of your system. For example, wic_x86_enu.exe is English - United States, and the wic_x86_fra.exe is French.

• Can what "Windows Imaging Component' (WIC) I download?

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=32

  What WIC download?
  I need to know, so I can download .NET Framework 4.0

  I have:

  OS name: Microsoft Windows XP Home edition
  Version: 5.1.2600 Service Pack 2 Build 2600
  OS manufacturer: Microsoft Corporation
  System manufacturer: TOSHIBA
  System model: Satellite A105
  System type: X 86-based PC
  SMBIOS Version: 2.31 - what is - this?
  Layer of HAL: Version = "5.1.2600.2562 (xpsp.040919 - 1030)"-which is the Hardware Abstraction Layer?

  -------
  If you need more information, let me know.
  You do not need to respond to the additional questions, but would be appreciated.

  Hello

  I suggest you to download wic_x86_enu.exe from following link:

  Windows Imaging Component
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=32

  What is SMBIOS?

  System Management BIOS (SMBIOS) is a data structure exported by BIOS latest on x 86 platforms, including those currently produced by Sun. SMBIOS is a standardized software system low level export configuration information material as high-level system management software. The SMBIOS itself data format is defined by the DMTF Distributed Management Task Force (). Seedmtf.org if you want to read a copy of the specification itself.

  From: https://blogs.oracle.com/mws/entry/smbios_support_for_solaris_x86

  Layer of HAL
  http://msdn.Microsoft.com/en-us/library/aa915144.aspx

• On component WIC Installer installation failure: [2] Setup failed on component WIC Installer DepCheck indicates WIC Installer is not installed. Error code 1603

  I HAVE DOWNLOADE .NET FRAMEWORK SINCE THE LINK FOLLOWING, BUT AN ERROR HAS OCCURRED DURING INSTALLATION...      Microsoft .NET Framework 3.5 and .NET Framework 3.5 Service Pack 1

  http://download.Microsoft.com/download/2/0/E/20E90413-712F-438C-988e-FDAA79A8AC3D/dotnetfx35.exe
  ERRORS SHOWN
  [12/31/11, 02:09:33] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 02:09:33] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05:28:13] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 05:28:14] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05:28:28] WapUI: DepCheck indicates [2] WIC Installer is not installed.

  [12/31/11, 05:32:22] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 05: 32:23] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05: 32:38] WapUI: DepCheck indicates [2] WIC Installer is not installed.

  Hi faizanbokhari,

  Follow the steps in the article.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

• What 32-bit wic download to garmin

  I need to downlaod Wic 32 bit to update my maps on my Garmin GPS, but it redirects me to a page with a bunch of codes and I don't know which is correct. I have a Dell Windows Vista XPS 400.  Version 5.1. Any help would be greatly appreciated.

  Thank you!

  Hello

  
  You can download from the following link.
  Windows Imaging Component
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=32#system-requirements
  Note: select the language you want to download.
  If you want to then English, select wic_x86_enu.exe and the link downloadfrom.

• WIC T1-1DSU vs VWIC2-1MFT-T1/E1

  Hi all

  I'm looking at a router of production with a VWIC2-1MFT-T1/E1 module, and none of the two parts of the serial p2p connection configurations of clock rate. Now I know, the VWIC2-1MFT-T1/E1, everything is configured under the controller interface. However I don't see any orders as with the WIC-1DSU clock rate. How does this work? Does this mean that there is a CDU/CSU at this place? I'm just used to seeing the WIC-1DSU-T1 more and have not worked with before multiflex modules.

  Thank you

  Hello

  If you have a WIC-1DSU-T1, WIC-1DSU-T1-V2 or HWIC-1DSU-T1, you pass under the clock interface source configuration and type of service-module t1:

  3845_2 (config) #int serial 0/1/0

  3845_2(Config-if) clock t1 source #-service module?

  clock use internal adapter

  clock to recover the line

  You have 2 options here as you can see. Internal provides synchronization and line gets by synchronizing. In a circuit back to back, it is recommended to configure one end as 'internal', while the other is "online". If your provider is in the middle to provide synchronization for both ends, the configuration of the 'line' is recommended, but it depends on the specifications of the circuit. You can use the "show-service module" (don't forget the counters to see compensation costs statistics) command to see if there are synchronizing issues. Basically, you need to focus on the 'Dry' value, this leaflet. If it increases, it is recommended to check if the synchronization is correctly configured. Sometimes you need to get the vendor involved to confirm the right configuration of synchronization, you should have.

  On the other hand, if you have a VWICX-XMFT-T1/E1 you must enter in the configuration of the controller and choose the right configuration of synchronization. It works essentially the same as in a WIC-1DSU-T1 hardware and similar.

  T1 #controller 3845_1 (config) 0/0/0

  3845_1(config-Controller) source of #clock?

  race free Free Running Clock

  Internal clock

  recovered clock line

  "The keyword which indicates a clock of free-running from the oscillator on the motherboard, which is used only for testing and back-to-back connections".

  http://www.Cisco.com/en/us/docs/iOS/12_2/12_2z/12_2zj/feature/guide/gthwecan.html

  To search for statistical use of the "show controllers t1 X/X/X" command and avoid using any command "loopback" so that it would affect the connection because it is used only for testing purposes. I hope this information helps and do not forget to note the useful messages.

  Kind regards.

• Dows routers Cisco 2921 supports WIC cards?

  I have trouble to install a frame relay service, because the seller sold me the WIC cards but I think that 2921 only supports cards HWIC

  Here the result to see the figure:

  Router Llano Mall
  ag321-VAC-rou-01 #sh diag | b WIC Slot 1:
  WIC Slot 1:
  Series 2T (12 in 1)
  Module WIC unsupported / disabled this slot machine
  Review of Board of revision 1.0 Hardware B0
  Serial number 32098957 part number 800-03181-02
  FRU part number WIC - 2T =
  Test the number of RMA history 0 x 0 00-00-00
  Type of PCI slot
  Format EEPROM 1 version
  Table of contents EEPROM (hex):
  0 X 20:01 12 01 00 01 E9 CA 8 D 50 6 02 00 00 00 00 0C
  0 X 30 : 58 00 00 00 04 04 08 00 FF FF FF FF FF FF FF FF

  Router Cumaná
  ag521-VAC-rou-01 #sh diag | b WIC Slot 0:
  WIC Slot 0:
  Daughter HWIC WAN card series 2T
  Hardware revision: 2.0
  Number of albums part together: 800-34379-01
  Review on board: A0
  Number of deviation: 115024
  Fab version: 02
  Serial number of PCB: FOC15023T8C
  History of the RMA tests: 00
  RMA number: 0-0-0-0
  RMA history: 00
  FAB part number: 28-8141-01
  Product number (FRU): HWIC-2 t
  Version identifier: V03
  CLEI Code: COUIA1RCAB
  EEPROM 4 format version
  Table of contents EEPROM (hex):
  0X00: 04 FF 40 05 89 41 02 00 C0 46 03 20 00 86 4 B 01
  0X10: 42 41 30 88 00 01 50 02 02 C1 8B 46 43 31 4F C1
  0x20: 35 30 32 33 54 38 43 03 00 81 00 00 00 00 04 00

  0 X 30: 85 1 1F CD 01 87 48 57 49 43 2D 32 54 89 56 CB
  0 X 40: 30 33 20 D9 02 40 C1 C6 8 A 43 55 49 41 31 52 4F
  0 X 50 : 43 41 42 FF FF FF FF FF FF FF FF FF FF FF FF FF
  0 X 60 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  0 X 70 : FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

  Is there any command or any form can I use this card to put in place frame relay?

  Thanks in advance

  Alejandro

  It seems that he has not supported and an ISR G2 2921 would accept an HWIC-2 t instead.

  http://www.Cisco.com/en/us/products/ps10537/products_relevant_interfaces...

  Sent by Cisco Support technique iPhone App

• Installed WICs CDU/CSU, will not work

  Today, I received a pack of 7 DSU/CSU T1 of Cisco WAN Interface Card (WIC-1DSU-T1-V2). I installed 6 of them (4 on a 2811 router and 2 on a 1841 router) and none of them would light up, appear in the controllers to see the or appear in show ip interface brief. Is there something I need to do other than just inserting them in as to get the software or entering some commands? (I installed the maps while routers have been turned off). If someone could help me I would be delighted, thank you

  Start checking 'show diag '. Then you probably need to update to IOS.

• 1721 router + 4esw, WIC + IOS firewall

  Hello

  I have a router (192.168.157.254) Cisco 1721 with a 4port10/100 wic installed.

  Is it possible to filter using IOS Firewall if wic address and lan are similar? I know it's that they have different ip addresses is possible, but if they are in the same LAN?

  For example:

  A server (192.168.157.10) connected directly to the router FILTER wic and using the LAN interface.

  Is possible?

  Best regards

  Yes, the IOS Firewall can filter even if the address LAN and wic are similar. The following link can help you

  http://www.Cisco.com/en/us/docs/iOS/12_4/secure/configuration/guide/schfirwl.html

• Try to download 32-bit WIC (Windows Imaging Component), but there is no download for the English label?

  Am I missing something?  The page has NO tab for the English version to download.

  Wassa matta you?  Don't you read Microsoft?

  It is the one named wic_x86_enu.exe (for example, English - U.S.)

• Error message indicates that Windows Imaging Component (WIC) is missing or damaged.

  Trying to open Turbo Tax 2011, it gives me an error message on the Windows Imaging Component is missing or damaged.   I equipped of Windows Vista-64 bit on my HP Pavilion dv 5 laptop.  They give a place to download the component, but it still does not work.

  Any suggestions?  It seems to be the only program that does not work.  Everything else works well.

  Hello

  1. where did you download the component?

  2. it worked before?

  3. don't you make recent changes?

  I suggest you to uninstall and reinstall the software and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  It will be useful.