unsecure calls with CTS 500-32

Similar Questions

• CTS 500 problem

  Hi all

  Telepresece cts 500 works well Pblm call in the voice of ip phone will no video

  But call initiated in Telpresence via the command line (start number dest) for the use of this command

  video and audio with success is the pblm, Ip phone 7975/phone directly connected

  for the Tp

  Hello

  Giving for granted that you are not lifting the handset of the telephone at the launch of the call (which would create the same symptom) I think that you probably MIDlets services does not properly on the phone.

  Make sure you have created the service of MIDlets in CUCM and you have subscribed to the telephone for service, as described below. Otherwise you will make the call from the phone and no endpoint of telepresence.

  http://www.Cisco.com/en/us/docs/Telepresence/cts_admin/1_5/Admin/Guide/cta_1_5_midlets.html

  If it's urgent, as you say, I recommend you open a Service request to TAC and they will be happy to help you immediately.

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• My contacts don't see who I am in a call with?

  Hello

  I'm new to Skype, but I have a question about my calls.

  members of my contacts don't see who I am in a video call with? can they still "call me"? or I will be offline since I am already in a call?

  Thanks for any help.

  If you are in a call, while others see this.
  When you are already in a call and second call comes then you will have the opportunity to put one on hold or join the second call to the current call.
  
  You can set your status to "do not disturb", if you wish, and then the calls will be rejected automatically or sent to your voicemail if you have.
  
  You will not be shown offline if you are in a call, your status will remain the same.
  
  André

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!

• don't use not webcam. can I use video calls with the status of "invisible"?

  If I use no webcam, can I make a video call with Invisible"like status?

  In Invisible mode, you can do exactly the same thing as in online mode.

  Without a webcam, you can not start video calls, but you will be able to receive another person's video.

• How to stop a program called with exec.vi system

  Hey Gang,

  I need to run a third-party application of in LabVIEW.  It works fine when it is called with the exec.vi system, as long as the user has entered the correct data.  However in some (very difficult to determine) conditions, the application crashes.

  I want to be able to force by program the application to complete and return to LV I assumed that there is a way to do it using the Windows API, but I don't know how to do this, and I would need a way to get the handle of the offending application Windows.

  Short re - implement the app in BT, I'm out of ideas.  I'll appreciate any help.

  Thank you

  Roger

  If you could post a picture of the offending code, it would be great. but two things come to mind, if you expect the exploit code (for example go to a wait for a period, then kill a task) wire: completion to false.

  then is another call to command prompt, look in taskkill /f

  You can kill a process

  It may be useful

• reject call with sms does not

  Hello

  Since I upgraded my 6603 lollipop I can't reject calls with SMS messages more.

  Because when I got a call (and the phone is locked) drag up the button to select the message of rejection on the bottom of the screen is layered with black bar soft key showing the home and back buttons.

  Is this a bug or am I missing a setting?

  Thanks in advance!

  Hello

  I've seen this before. You have installed the application Smart Key? If so, I suggest you uninstall this application if you want the ability to reject calls with a text message.

• my Skype closes and I click on a video call with an error: program of the window is closed due to technical problem

  original title: my Skype close as I click on a video call with error window close program because the problom technique

  I was using Skype program for a long time, but the last two days it stop working when I make a video call, it closes immediately give reason which, due to certain techniques problom window close the program

  Make sure your Windows is fully updated and the latest service pack installed.

  Update of Skype or to download the latest version of their Web site.

  Please update your webcam software and the graphics card driver.

  Check Windows problem and Solution Center and see if there is a new solution it.

• Reject incoming calls with SMS stop after update MM

  Reject incoming calls with SMS stop after update MM, now I can't take the lower panel and SMS, please help from Sony.

  Hi all

  Today I turned my double Z5 wide and I removed the SIM card of the mobile.

  I switched on without a SIM card, and I turned off again.

  I inserted the SIM card, and I lit.

  Now when I got call answer option is appear.

  It is ok.

• hostsvc: called with the DISP invalid/missing entry

  If I try to follow links in one of the e-mails I get from Big Brother, I get the following message is displayed:

  hostsvc: called with the DISP invalid/missing entry

  This is the full URL.

  Please see: http://servername/bb/cgi-bin/hostsvc.exe?HOSTSVC=server1, companyname.svcs, & DISP

  I noticed that the text of the e-mail message contains an = sign, which is not part of the hyperlink. If I understand the = the link works then. For example:

  See example: http://servername/bb/cgi-bin/hostsvc.exe?HOSTSVC=server1, companyname.svcs, & DISP=

  I did the search. Here's what's happening with the Outlook 2007 SP2 calendering of BB notifications, so that the & DSP = part of the bond is converted to & DSP without the = in the link to the notification.

  This deformation occurs only when a SMS is received, which has a text version of a link HTML in there and it is received by Exchange 2007 with Outlo0k 2007.

  When outlook 2007 (sp2 in our case) will receive an email with a link inside HTML text, it makes a "best body format.

  Conversion. You always have an email in text format, but there is a HTML link truncated in the recipe, which has not only = inside.

  This only happens when the text is converted to HTML.

  I even tried hard put forced HTML or RTF format on the mailbox... no go... He did force these formats. but the text to html conversion happens broken Similarly, regardless of the size of the mailbox.

  If messages would be in HTMl, it would work perfectly. Maybe one day you could make this an option... the message in text or html format. (development

  request)

  If I paste the link in an html format email, it works very well. Also, if I find the message and click the link in the notification with Outlook Web Access, it works very well.

  Only from Outlook 2007, Microsoft changed the default HTML rendering, used by Word 2007 engine. That's the problem. It is this rendering engine that has the problem, a lot of people are very annoyed and Microsoft does not care to fix it.

  So far we have the option for sending to HTML, or Microsoft fixes some of this.

  the only option we have is to get the wrong message from: hostsvc: called with the DISP invalid/missing entry, then to go into the browser and add in the '=' manually, and it will then visit the link in the notification.

  Any ideas or suggestions? Thank you

  Hi Milt

  Well, in hostsvc.exe, he could accept a missing DISP (or deformed) and defaults to «» This should be the solution. I don't think that it could break anything if it were this way.

• When I'm on a video call with somone that my photo is still backwards down.how I fix this?

  When I'm on a video call with someone, that my photo is still backwards down.how I fix this?

  Hi Carolannjansson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What application you use to make a video call?
  2. Are all the device drivers and Windows updates are updated?
  3. What is the brand and model of your computer?
  4. It was working fine? If Yes, did you significant changes before the show?

  If you use Skype you can check the following thread and see if it helps you to solve the problem.

  The webcam image is upside down Skype.

  Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you.

  Kind regards

• File extension registry BB10 to call with your app

  Hi guys,.

  I've read enough about Invoke framework but I didn't know how yo to register your application to call with any file extension.

  How to do this?

  I mean, I want to leave BB10 users to open files ".xyz" with my about how to do? How to allow other developers to know my application can handle .xyz files?

  It was mentioned to JAM that RIM will host a page where patterns of basic applications are defined so that allow third parties to display their application interfaces. I don't think that has been done yet.

• ApplicationMenuItem called with null in JDE 4.6 when you enter the phone number

  When I install a custom phone app, ApplicationMenuItem and

  try to enter a number on the keypad of the native Dialer, and then click the custom menu,

  my custom ApplicationMenuItem is called with a null context object.

  This same code + test case works well under the 4.5 JDE / 8300 emulator

  and device 8320, but fails under JDE 4.6 with the BB 9000 emulator

  and device

  To reproduce the bug:

  * Build/launch of the attached test application

  * Send with previous key

  * Go to the native Dialer

  * Enter "123" on the keyboard of the phone

  * Click on the trackball

  * Choose Bug49 the context menu

  * It will appear a dialog box indicating "context has the null value - is this a bug?

  NOTE that if, rather than enter a number on the keypad of the phone with step 4.

  a call log is selected, then it works and a non-null context object is passed.

  Can I make it work?  If this is a known bug, are

  It no work around?

  import net.rim.blackberry.api.menuitem.ApplicationMenuItem;import net.rim.blackberry.api.menuitem.ApplicationMenuItemRepository;import net.rim.device.api.ui.UiApplication;import net.rim.device.api.ui.component.Dialog;import net.rim.device.api.ui.component.LabelField;import net.rim.device.api.ui.component.RichTextField;import net.rim.device.api.ui.container.MainScreen;
  
  public class Bug49 extends UiApplication { public Bug49()    {     super();      Bug49Screen screen = new Bug49Screen();       pushScreen(screen);       ApplicationMenuItemRepository amir = ApplicationMenuItemRepository.getInstance();     Bug49NativeMenu bug49NativeMenu = new Bug49NativeMenu(0);     amir.addMenuItem(ApplicationMenuItemRepository.MENUITEM_PHONE, bug49NativeMenu ); }
  
    public static void main(String[] args) {      Bug49 b49 = new Bug49();      b49.enterEventDispatcher();   }
  
     static class Bug49Screen extends MainScreen {     public Bug49Screen() {            super();          setTitle(new LabelField("Hello"));            add(new RichTextField("Hello"));      } }
  
    static class Bug49NativeMenu extends ApplicationMenuItem  {     public Bug49NativeMenu(int order) {           super(order);     }     public Object run(Object context) {           if (context == null) {                Dialog.alert("context is null -- is this a bug?");            }         else {                Dialog.alert("context not null");         }         return null;      }     public String toString() {            return "Bug 49";      } }}
  

  It is a problem in the version of BlackBerry device software 4.6.0.  It has been fixed in version 4.7.0.

• Some Web sites can not access, screen goes white with http 500 errors

  Original title: http 500 errors

  Salvation; Please forgive my PC literacy is near the bottom of the range, but I recently started getting errors. I can browse the Web, but when I log on say Web site common CBSSports and try opening a session I did a million times - the screen blanks out and tells me unable to access Web pages and when I ask for more info... I'm getting http 500 Internal Server Error. It seems to get worse and unable to access less Web sites. Can someone please help?

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are unable to browse Web sites with http 500 errors. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. what web browser do you use?

  2. have you made any recent hardware or exchange of software on your computer before the show?

   

   

  Please follow the methods below if you use Internet Explorer and check the number:

  Method 1:

   

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

   

   

  Why are some pages blank or incorrectly displayed in Internet Explorer? :

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

   

   

  Method 3:

   

  Get help with website (HTTP error) error messages:

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-website-error-messages-HTTP-errors

   

  I hope that the information above helps you.

• video call with messaging app?

  Can I make a video call with the mail app? It doesn't have this option. I go to App people and select the contact that is currently available online on their messenger, and I can't call or an option for video.

  You can chat with people using Skype Messenger. Long term, I think that MS has announced that Live Messenger is going away - replaced by Skype (which IM, phone calls, video calls).

  This page can help - how can I appeal/IM my Messenger buddies by using Skype app:

  https://support.Skype.com/en/FAQ/FA12163/how-do-i-call-instant-message-and-text-my-Messenger-buddies-in-Skype-for-Windows-8?FromPage=search&q=Messenger&fromSearchFirstPage=false

  Kate