Reject incoming calls with SMS stop after update MM

Similar Questions

• Phone call and sms crashes after update to 6.0

  After installing 6 Android. Phone call and sms crashes

  Hi Christopher,
  After installing Android 6.0 upgrade cannot dial a number and can not write and send sms.
  Yesterday, I reset my phone to factory default and now works well.
  Thanks for the reply

• reject call with sms does not

  Hello

  Since I upgraded my 6603 lollipop I can't reject calls with SMS messages more.

  Because when I got a call (and the phone is locked) drag up the button to select the message of rejection on the bottom of the screen is layered with black bar soft key showing the home and back buttons.

  Is this a bug or am I missing a setting?

  Thanks in advance!

  Hello

  I've seen this before. You have installed the application Smart Key? If so, I suggest you uninstall this application if you want the ability to reject calls with a text message.

• Reject incoming calls on ios 10 not listed is not on the lock screen (Notification)

  Reject incoming calls when the phone is locked by pressing the power button / stop on ios 10 that the same call does not appear on the lock screen or (Notification) as a reminder...

  N ° it will not. He never has. you will see a missed call notification if you miss the call. If you actively reject the call, you don't have to Miss it. Access your recent calls list and call back them was from there.

• Ring No. blackBerry Smartphones on incoming calls with my Pearl 8130

  I have a BB 8130 Pearl.  He has stopped ringing on incoming calls. After the four regular rings, not heard by the appellant, it is going to voicemail. All I get is the notification of voicemail.

  I had changed the ring.  I went into the media-Ring Tones - selected; Ringer_Classic Phone.acc - set as ringtone-, and I no longer get a ringtone for incoming calls. I don't know if this is the cause.  But it's the only thing I've done since I have the BB last week.

  I called my ISP (Bell Mobility) and they were very helpful and surprisingly, very well informed. After the menus and check to be sure that the phone is not on mute, etc.  It seems that the signal strength was the culprit. So, my problem would be solved.

• Disorders of SMS Message after update

  I recently updated to IOS 9.3 and OS x 10.11.4. Since these updates, I had difficulties to send SMS.  iMessages forward vigorously. But I often get errors failure-to-send three and four times in a row when trying to send an SMS message longer than one short sentence.

  I have friends with non-Apple devices I have text frequently. Before the latest updates, my SMS messages would pass them quickly. Not now.  I don't know how to make Apple aware of this situation. I sent a direct message to @AppleSupport on Twitter. Not sure how that will be effective.

  Does anyone else have this problem?

  Note to moderators: don't know where this question from the list. Please go to the Board. Thank you.

  NoBite says:

  I recently updated to IOS 9.3 and OS x 10.11.4. Since these updates, I had difficulties to send SMS.  iMessages forward vigorously. But I often get errors failure-to-send three and four times in a row when trying to send an SMS message longer than one short sentence.

  I have friends with non-Apple devices I have text frequently. Before the latest updates, my SMS messages would pass them quickly. Not now.  I don't know how to make Apple aware of this situation. I sent a direct message to @AppleSupport on Twitter. Not sure how that will be effective.

  Does anyone else have this problem?

  Note to moderators: don't know where this question from the list. Please go to the Board. Thank you.

  Why would you make Apple aware of a program that has nothing to do with them or the update.

  SMS / text from always a function of carrier and not apple.

  If you are unable to send/receive text you can watch here If you cannot send or receive messages on your iPad, iPhone or iPod touch - Apple Support

  If this does not work then contact your cell phone provider and ask them why their functionality does not work on your phone.

• Tab2A10-70F - 'Services Google Play has stopped' after update

  After update my Tab2A10-70F, an error 'unfortunately Google game has stopped Services' message block other applications. How can I eliminate this? Google store no more work. I need help please.

  Comment to Moderator: New thread is created. Edited topic. A: Re: How do I send a private message?

  Thank you. In fact, I was able to fix it by disabling the Google Services to play then uninstall all updates. After reboot, many applications, including the Google Services to play began requesting updates and after updates, everything is OK except an inscription that appears after startup: "a movement of application is finished.

• Windows 7 does not stop after updates

  My computer will not stop after you install updates. What is the best way to solve the problem?

  Thank you
  Cam1956

  Hi cam1956,

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Run the troubleshooter in Windows 7 for Windows Update turn when starting the computer on the desk, and perhaps that should take care of the updates. Install updates by selecting two to both as the updates and see update is actually causing the problem.

  Once you have identified the update that causes the problem, you can access the link below and install the updates manually.

  http://support.Microsoft.com/default.aspx/GP/downloadover/en-AU#TAB0

  If you know the updates that must be installed, you can manually enter the KB update in the search bar the link to download the update manually.

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. If you are in the office, do a system restore which will take the computer to a time where it was working fine and then start to install the updates manually as suggested above.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know if the problem is not resolved or for any other help.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Videos playing only with the sound after update 49.0.2

  After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

  It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

  This may not take effect until the next time that you exit Firefox and start it again.

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Phone rejects incoming calls. (not blackscreen)

  As soons as I touch the screen to answer, he rejects the call. 1/20 I managed to answer, but it's at home test it. Pocket IRL, impossible to answer.

  shot in the phone for repairs, and * bleep * me tab to the SIM card was bright red. .

  But it is in the upper left corner, rejecting call thingie is located in the lower right.

  I'll probably just the phone even in as Xweeks since the Red sticker.

  So this might even be the problem? the touchscreen works perfectly during the games and such and this is not the problem of blackscreen, he refuses just calls!

  factory made 3 reverts so probably not a software problem.

  Any suggestions?

  Peace!

  It of a hardware problem, contact your local Support Xperia and request a trial of vacuum.

  http://support.sonymobile.com/global-en/contactus/

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• iCal will sync with google calendar after update

  After the update to El Capitan, the calendar on the macmini syncs with google calendar.  Are there previous events to google calendar but nothing new will come and nothing new on the mac mini will return to google.

  Found a few other posts about it, but their instructions do not work on the mac mini (for example a statement saying select google and click on the sign less - there is no sign less!)

  I looked for a way to remove the gmail out of the mac mini calendar but can't find a way.  I can just uncheck the calendar.  Using mini mac just says if you can't remove a calendar on the mac mini to go and remove it out of google.  I don't want to do that.  The google calendar sync very well to our cell phones and Outlook on the Windows PC.  Google calendar is Center of maintaining us immediately the same way and I don't want to delete it just to try to fix the bug of El Capitan darn!

  I have tried the calendar time, but he acknowledges that he is already in the mac mini.

  I disabled the gmail calendar.  restarted the computer.  again check the gmail calendar.  but the only thing that comes up is the previous items.  I still can't sync it with google gmail ical calendar.

  What should I do next to get the ical to sync with google calendar?

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize agendas or reminders with a network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Log off or restart the computer.

  Launch schedule and see if there is an improvement.

• Problem with Audio drivers after updating through the solution Center

  I left the Lenovo Solution Center perform an update on my system, and now I get two error each time Windows starts upward.

  FIRST ERROR: "command line of TOMY Application has stopped working".

  I give myself two arrows to click:

  "Check online for a solution and close the program" (does nothing)

  -"Close the program".

  "Display the details of the issue" reveals:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SACmd64.exe
  Application version: 11.0.0.0
  Application timestamp: 4ee94e0a
  Fault Module name: SACmd64.exe
  Fault Module Version: 11.0.0.0
  Timestamp of Module error: 4ee94e0a
  Exception code: 40000015
  Exception offset: 0000000000150225
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: e357
  More information 2: e357a1a1b0010a7001c2e1562bb09767
  3 more information: 7d1f
  Additional information 4: 7d1fe5f93672c47a0d347598ff39d707

  SECOND MISTAKE: "Dolby Advanced Audio.

  The current version of the Dolby audio driver is 7.2.8000.13 and the software application expects that the version of the driver 7.2.7000.11. Please install a valid application of driver and software combination.

  The only option here is to click an OK button.

  These errors did not appear until I left the Lenovo Solution Center perform a software update.  I would have thought that the built in Lenovo program would update the correct drivers and software applications.

  Can what steps I take to solve these two error messages?

  Lenovo Thinkpad Edge E430

  TYPE 3254-CTO

  Windows 7 Home Premium 64-bit

  Core i7-3612-QM CPU @ 2.10 GHz

  Kit of memory 16GB DDR3 1600 MHz Corsair Vengeance SDRAM (CMSX16GX3M2A1600C10)

  I source and solved my problem.

  Follow the link:

  http://forums.Lenovo.com/T5/ThinkPad-edge-S-series/E430-Dolby-advanced-audio-issue/TD-p/826333

  I found that the instructions given by a member was more useful.

  First go to;

  Start > Control Panel > hardware and sound > Device Manager >

  Then go down to "sound, video and game controllers".

  Then 'right click' on the 'Conexant 20671 HD' and on the left, click on uninstall.

  Wait for the uninstall process to finish and then restart your computer.

  Wait a few minutes after the start to the top and Windows should automatically re - install the driver, that invites you to a message in the lower corner box right saying: "driver installed successfully', with the name of the driver below. (Mine was the same driver "20671 HD"

  Bingo, problem solved.

  If this does not work for you, there are other solutions and/or forum members/staff that can help.

  Hope this helps,

  Rexe

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Disconnection of call with button / stop

  Hello

  Is it possible to have call disconnect with button system / stop?

  Ex:. Samsung gives call witness (Home button) and disconnect with (power button)

  Concerning

  Paddy