Unwanted features and apps with updates

Similar Questions

• Display change in health app with update iOS 9.3

  With the new update 9.3, the display has changed and I do not see how to restore. Displaying measures, for example in the dashboard, before the update, I'd like to see a line shows the averages for the week or month and to a point where I am every day connected by a line - a line chart linking every day where you can see if you are above or below the average line that moves as the variation inherently average during the week or in the month. I liked it. Now you get just bars for every day - hard to see if you are above or below average.

  This can be changed? I don't see how.

  Just discovered this & will file a complaint - the bars are VERY difficult to see the & visually impaired. The lines were better. We should have control before they impose a change like that.

• just moved to El Capitan and now cannot update apps like message says I have either cancelled or never bought apps (they are iPhoto, that came with my Macbook

  I need to update my applications for iPhoto, my printer software and iMovie, the message I get is that I have to be cancelled, or never bought these apps, well, I didn't cancel them I use them all the time and I have always had them, then, why the error message?

  Apple develops is not iPhoto. It has been replaced by a new application that is installed with OS X. You will find the new app in the Apps folder. It's called pictures and works with its equivalent in the iOS on iPhone and iPad.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• ElitePad 1000 G2: 10 Pro Version 1511, threshold 2 update Windows crashes on 'features and drivers '.

  Summer running Windows 10 Pro 64-bit for months without problem on my G2 ElitePad 1000; application Windows 10 updates throughout - so far. Yesterday, 12/11/2015, 1511 (threshold 2) updated version of Microsoft automatically downloaded and rebooted to start installation of operating system upgrade. The upgrade completed the first phase "Copying files" and began the second phase "Patterns and drivers", then stopped (paused) to 40% total progress/23% features and drivers progress with no other response. Only one stop 'hard' (hold down the power button / stop for at least 10 seconds) worked. On 'power up' the result was a "restore previous version" immediately, and subsequent reboot restored my previous login - as expected.

  HP have a new image or update for Windows Pro 64 - bit version 1511/threshold 10 2? The update is put on hold due to a driver issue? Any advice would be appreciated.

  Finally, a solution for me! I used Microsoft's latest "MediaCreationTool" (as of 11/13/2015) to download and create a "USB stick" (08/01/2016) upgrade support. Stick created USB contained more than 3 GB of content upgrade. Started my ElitePad in my 10 original Windows operating system upgrade, and then insert the USB in my ElitePad. Launched "Setup.exe" on the USB key to start the process to level, and left the USB connected until the upgrade is completed; several reboots of the upgrade. Once launched from Setup.exe, a menu background blue proceeded and displays "Check updates" for more than 15 minutes (check the updated drivers, etc.), and then proceeded to the display of the upgrade process (progress circle GUI). The upgrade has completed in 90 minutes without a hitch. So far, all programs and functions are intact. I guess that is focused on the HP drivers updated (finally) in the current construction of 1511, and/or the last created USB stick media works where Microsoft Update (via Microsoft Update servers) has a problem. For me, this solves my problem to upgrade v1511. I hope this helps others.

• Windows 8 app Store could not update the app with error code 0 x 80070057

  Hello

  I have an application that I downloaded from the App Store of Windows 8 (RTM version), who has recently had an update, but Windows Store could not be updated and returned the error code 80070057 0 x.  But after the update failed, Windows Store still lists old as installed APP and calls the updated application.  I tried reapplying the update but it keeps fails with the error 0 x 80070057.  I tried to look for ways to uninstall it, but the Live tile has been removed from the home screen (not listed under all the Apps either), so there is no way to uninstall it.  Now I'm stuck with Windows Store perpetually asking the updated application.
  Does anyone know how to uninstall a Windows 8 application without the Live tile?  Thank you.

  Open Explorer and in the navigation bar, type \AppDatausernamec:\users\

  Replace username with your actual user name, for example c:\users\debbie\appdata

  It is a hidden folder, you cannot display it by default unless you authorize the display of hidden folders.

• Running a server of Freelancer with Windows XP and have problems with updates

  I run a server for a game called freelancer who has been released by Microsoft in 2003. My problem is that, in recent years, when I tried to get the server working after doing a clean install of WinXP Pro and get the updates, the server hanging and not start working properly. After several installations with various combinations of what has been installed after the OS, I finally got the server works, but get this: the server runs only on Windows XP with NO updates. WHY?

  I have a theory that I can't prove it on WinXP... When Freelancer was released in 2003, XP was new and she has no security features there now, and I think that one or more of the mess of updates with the server of DirectPlay 8 which is integral to the operation of the server. Of you Eggheads Microsoft must know what I mean... I don't know enough on XP to do more to make a guess, and it's my guess...

  Thank you for allowing me to escape,
  Tanamir

  Hello

  DirectPlay has been moved to support engineering and is an obsolete API. This was done mainly because of security problems and the fact that most of the features of DirectPlay is no longer relevant. TCP/IP is the ubiquitous network protocol and support for the head-to-head modem, serial port,

  NetBIOS, IPX and other suppliers is no longer relevant. Native API for TCP/IP in Windows is WinSock, and the usefulness of the library is so limited.

  There are technologies in Windows XP SP 2 or later version that provide server under protocols of discovery to manage the features of lobbying (P2P and PNRP), and many third-party solutions exist for matching. Future Microsoft technologies for this will be based on WinSock and not of DirectPlay.

  Support in future versions of the operating system will be determined primarily by the problem of application compatibility and will continue to be available through the Platform SDK for those supporting legacy streaming of DirectPlay applications.

  For reference: error messages when you try to connect to the game multiplayer matchmaking: http://support.microsoft.com/kb/829151/en-us

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• CC app manager update failed with error 50 code after reaching approximately 35%

  Try to update the app CC Manager. The update is still very slow (I have ATT DSL, lowest level) and I usually stop after an hour or two. Today I let it run and it failed with the error code 50 after reaching approximately 35%. Any ideas?

  Update my original post. I read through some of the suggestions I found in other threads to solve this problem, and it seems that this is a recurring problem. Many corrections have been suggested, some very convoluted, difficult and involved, including those who came to the customer support people.  I passed on those who, like this must be something simple. How Adobe managed to leave their own tour of software update in a persistent problem is beyond me and kind of defeats the object of the subscription. I then noticed that a simple fix has been proposed several times, so I tried.

  The user suggested fix that worked for me was:

  (1) restarted the computer (machine of i3 Asus Windows 7 for me) in Mode safe mode with networking. Connected to my separate Admin account just in case.

  2) started the creative cloud desktop application.

  (3) the app said it had to be updated. I hit the update button.

  (4) update started and proceeded slowly as he was in a lot of previous unsuccessful attempts (I have ATT DSL to the slower level, but it is not switched). In 30 minutes, the update succeeded.

  (5) restarted the computer in normal mode.

  (6) the creative cloud desktop application now has not said he should be updated, and I can update my other apps normally. Have not updated LR or PS again, but intend to try. If this fails, I can try to do in Mode safe mode with networking.

  So, it's been relatively painless and much much simpler than most of the other suggestions I've seen. Don't know if this will work for everyone, but I wanted to post the solution that worked for me. Thank you very much for users of 2 or 3 which had proposed this hotfix earlier (sorry, I did not write down your login, but threads can be found in search for creative cloud desktop update fails error code 50). Hope this saves some people a lot of time.

• Updated app with account different creative cloud

  This question is about an existing single-folio application that is already published and is now updated. Unfortunately, the app was transferred to the enforcement of a cloud creative designer, we have access to more, so we need to use our 'new' creative cloud to load in the application builder, then in itunes. is this possible or to publish a new application?

  the itunes account is the same, of course.

  As long as you use the same certificate and iTunes account, you can rebuild the application with another CC account and submit it as an update of an existing application.

• Photoshop 3D features are available with single-app subscription?

  Hello

  I'm a little confused about how to get the equivalent of "Photoshop Extended" in the world of the subscription. I got the PS membership for a while, but I don't think that the 3D features have been included. Now I need to start with matte paintings and work with 3D and I can't figure out how. Really, I have much use for other wholesale products in the suite, so it is difficult to justify the subscription to the entire group. Any ideas?

  Thank you!

  Wine

  Vinayak,

  The terminable only App for Photoshop CS6 or estates on with CC has Photoshop Extended so that they have for sure all 3d features.

  See the link below:

  http://www.Adobe.com/products/creativecloud/FAQ.html#desktop-products

  -Florian

• Update of the app with the application loader: bundle is not valid-> error CFBundleShortVersionString

  Hello

  One of my clients is trying to update their app. They created a new viewer of several question (via ver18).

  When you download this app with the application loader that they receive the following error message:

  "This package is not valid. The CFBundleShortVersionString key in the info.plist file must contain a newer version than that of the previously downloaded version.

  (see screenshot)

  During the audit, the app update was indeed a (iTunes) version number lower than that already on the app store. So I thought that was the problem, but when you select a higher version and try again error still persists.

  I couldn't really find someone on the forum who has had this problem.

  Tips are always welcome

  Thank you

  

  Bart - someone from Adobe can change the version number on the viewer Builder server. Contact your Adobe representative or Gold support.

  Post edited by: Matthew Laun, deleted the reference to my direct email address. All Support Gold have access to do it now.

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

  I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

  Try to reset the App Store:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then reconnect to the iTunes Store.

  Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

• With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  You can drag links to the private browsing window (hover the icon on the task bar for this update of the Firefox window).
  
  If you drop the link on an empty space on the tab bar, then the link should open in a new tab.