Update and global storage settings

Similar Questions

• Global storage settings keep the desired configuration - help?

  8.1 Windows 64-bit

  THAT IS TO SAY 11.0.12

  Flash 15.0.0.189

  When I visit this link:

  Adobe - Flash Player: settings - Global storage settings panel Manager

  and I try to set my parameters of Global storage from 100 KB to 10 MB, it allows me to do that, BUT when I reopen it the Panel, I see that he went immediately to 100 KB.

  I need to be 10 MB because I store a lot of things. I keep running into questions to 100KB.

  I already tried to remove the Flash Player folder under "% appdata%\Adobe" and "% appdata%\Macromedia", but that he has not solved.

  How can I get my 10 MB Global storage settings and STAY go?

  Thank you.

  Yes, this looks like a bug specific to IE on Windows 8 and higher.

  I submitted the bug following on your behalf: Bug #3840386 - storage settings Global [Win8.x], Control Panel does not work in Internet Explorer

  As a temporary workaround, you could use Chrome.

  Thank you!

• Global storage settings

  Using Firefox on XP Pro machine, I put my settings from Global Storage to not allow third-party Flash content to be stored on my computer and not to store common Flash components. Why these settings back 'on their own' even within a single session? Also, how can I prevent Flash Cookies?

  Thank you!

  Hi, you can be sure that CC Flash. Well, I know that FF is a plugin/addon/extension(not sure which) called Better Privacy that does this. If I remember correctly, you can select the sites you want to have cookies.

  As far as I know is not something like that for IE, or at least that I have heard of. Now, IE9 has a new feature called Tracking protection which I think can do what you want to do. And yes I know that IE9 is not available for XP, because I use XP :-)

  IE8 Private Browsing and some other features that are not IE6/IE7, then you want to check out these features. If they have something to do with cookies, I don't know.

  In IE > tools > Internet Options under the Privacy tab, check your cookie settings there. Perhaps an adjustment can be made.

  If someone is tracking my work computer, all they get is my notifications by e-mail of the Flash Player Forum and the Forum of Flash Player :-) They probably just gave up and stopped followed me, ha - ha

  Thank you

  eidnolb

• UPDATE AND THE BROWSER SETTINGS

  Recently, I contacted a technician Microsoft issues an update on the MSE. In his letter, he said that the issue could be linked to the wrong browser settings I want to know is IE anyway related to updates on the updates of Windows and other programs?

  Yes. When the updates are downloaded/installed manually or automatically [1] [2], connection Internet Explorer is used "behind the scenes."

  This applies to Microsoft Security Essentials automatically updated, as well. [3]

  ~~~~~~~~~~~~~~~~~~~
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off [1]
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date [2]
  [3] if Microsoft Security Essentials is installed and working properly, it will automatically be updated at least once every 24 hours.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CDROM updates and Server repository settings

  Is that any reason, I need to specify repository server parameters when using the CDROM updates in the studio? Is there a a way to avoid specifying them?

  Thank you

  Ken

  Repository server settings are necessary, because this place is currently a Studio working directory to prepare the updated repository regardless of the final update mechanism. This directory can be removed if you chose to export the update repo to an iso standard for the update of CDROM. It is expected to optimize this requirement in future versions of Studio.

• Reinstall XP (box set) w / updated version and keep the settings?

  My old installation of XP Professional (ver 2000 / SP1 retail box) is not working properly.  Hundreds of antivirus, fixes Registry scans, updates and several hard drive card mother upgrade and later I lost some basic features *.  Can I reinstall XP using a downloaded newer version (SP3) using my old key (commercial box version) and keep all my settings?  I remember that I did this a few years ago and had to rebuild all the updates, but I got what I needed.  Now when I try, the same original disk says that I must start over costs and versions are not compatible.  Also, where is the best place to get the installation files?

  A most annoying things is the delay huge opening files.  Some never open and I get a message unable to find the file, that I just clicked?  I reinstalled all affected programs (like Office 2003 / Excel) and there is no improvement.

  Interesting responses.  I was not on top of the issue of IE, but it makes sense.  It has been a few years, but I remember that the successful repair XP restored my IE and I've had to update again, but he did not screw up the repair.  I think that IEv7 was in use at the time.  I am currently on IEv8.

  My restore points do not rise close enough to fix all of this and the last one I tried (up to a point a week or so prior) failed.  3rd party patches registry improve some things, but not all.

  I have the original disc of the 2002 version of the retail box.  No download version.  I was hoping to find one online as I did for S7 in my newsroom.  For this installation, I bought a key provider of Microsoft and it worked fine.

  Maybe I'll start a couple of new threads for specific problems.

• updates and settings

  I would like to change the settings that have been updated on 7/19 return to the original settings.  The screen of my password was changed in small letters as well as my internet reall, etc..

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or try this instead:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  See you soon.

  Mick Murphy - Microsoft partner

• All my files and pictures have been deleted and all my settings for my computer after windows update

  Original title: update of Windows 8

  All my files and pictures have been deleted and all my settings for my computer after the update of windows. I need some answers! Microsoft you need to find something to say to me. WTF! Your update has ruined my computer

  Shawn,

  I think this isn't the Windows update that caused this problem. It could be something else the cause. Windows Update never removes any of your files and folders stored in the computer.

  You can try a system restore to a previous point when the computer was working properly.

  see this link:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Database update issue with JavaScript and local storage

  Hi all

  I come from a PHP background and a newbie with HTML5 and JavaScript, and local storage

  
  

  Currently I'm building a mobile web application that uses a remote database.

  I have a question about the update database.

  Currently, I set it up so that when the user logs on successfully - Local Storage fields are loaded from the remote database query using a jQuery.Get. This seems to work well.

  When it's time to update the data, I fill the form in local storage, allow the user edit fields, then:

  -a form post to send data to the remote php page that updates the database...

  Here is where I have a question: How can I make sure the edit went through good - what is better to do it now?

  -Can I set up a json response to say whether or not the update was successful

  or

  -Query the database once more and recover the fields to compare the edit results

  or

  -Another technique to do of course change it went through OK

  - then if successful, I can update the local storage

  Q: what is the best way to ensure that the database has been correctly updated (and also not lose time with Access database useless)?

  Is there a recommended for this?

  In addition, if possible this beginner can use a clear example...

  Why not to use jquery get () callback status where if the success is returned then to update local storage?

  best,

  Shocker

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 10 iOS came out today, but why isn't she displayed in my 'update software' in the settings. ?

  10 iOS update came out today, but it does not appear in my "update software" in the settings, what do I do? or how long will it take to show?

  That may depend on the country in which you reside.   As AFAIK, new OSs are generally released according to the marketing of policies in one country or another, not at the same time global. I can't detect what country you are.

• 9.3.5 on my IPhone 6 updated and now I can't get wifi

  9.3.5 on my Iphone 6 updated and now can't get wifi?

  Hello

  Follow the steps here:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  Recommended settings for the WiFi routers and access points - Apple supported

• Update iOS affects storage?

  I thought about it for a long time now.

  Ios updates use memory? I mean, when I look at the use of the storage list, in case theres a new update, new update ios x.x.x says ~ 400 MB.

  So, if I deciede to update, I never will have 400 MB less storage to use?

  And if I update again and again and again... Will I run out of storage while updating?

  Or ios removes the old scripts of ios (or whatever his name) he didn't need?

  For example, if I use ios 9, and I got ios 7, is ios 7 still in the phone?

  And if I got ios 9 and now I have ios 9.0.1?

  I saw somewhere, ' to update with itunes on your desktop and save a lot of storage! ", is - it true?

  Slightly wrote:

  I thought about it for a long time now.

  Ios updates use memory? I mean, when I look at the use of the storage list, in case theres a new update, new update ios x.x.x says ~ 400 MB.

  So, if I deciede to update, I never will have 400 MB less storage to use?

  And if I update again and again and again... Will I run out of storage while updating?

  Or ios removes the old scripts of ios (or whatever his name) he didn't need?

  For example, if I use ios 9, and I got ios 7, is ios 7 still in the phone?

  And if I got ios 9 and now I have ios 9.0.1?

  I saw somewhere, ' to update with itunes on your desktop and save a lot of storage! ", is - it true?

  Once you update the phone storage IOS update will be removed from your phone.

  When you update to 9 you will IOS 8,7,6, on your phone again.

  Update via iTunes does not require that the amount of memory that you would live.

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?