Global storage settings keep the desired configuration - help?

Similar Questions

• Update and global storage settings

  First of all, my apologies for the ridiculously long user name. I played the keyboard in back of weeks of frustration when recording and were not in position to change it by updating my Adobe a/c, because it won't let me put an address etc. that is not in the USA (I'm in Australia).

  I tried to find an answer to my question in reading the other messages. There seems to be some very similar problems with the last update for Flash Player, but because of my lack of expertise in this area, I will describe my specific problem. So, here it is:

  I was locked out the function edit of my website host (wix.com) account because it forces me to update my Flash Player settings: http://support.wix.com/index.php/Editor_Doesnt_Open

  I downloaded the latest version of Flash a half dozen times now and installed. Installation always seems to be fine and no error message is high. The problem is that the updated version does not appear to have himself installed in one of my web browsers.

  The Flash Player Settings Manager (access c /-link above) is not even display in Firefox. It appears in Google Chrome (which is up to date and my default browser), IE and Safari.

  In order to access the edit to my a/c host function, I need (in the global storage settings) to have 100 KB on disk space slider, and also the check box for «Allow third-party content flash...» »

  The box allow not itself be checked in one of the browsers above, even if I can move the slider to 100 KB. If, however, I leave the page and return later, the cursor is always back to 'None' (I don't know if this is normal or not?).

  I have AVG anti-virus, which I tried to temporarily disable all by installing the update. I also rebooted my computer after installation, etc. but still no luck. Hopefully someone who has an idea can get back to me. Thank you.

  Hi thanks. Yes, the settings should stay that way until you change them.

  Take a look at this thread: http://forums.adobe.com/thread/732444?tstart=0    

  See if that helps.

  Thank you

  eidnolb

• Fatal error: invalid page found in the global storage file in the location for cube BSO

  Hi all

  Due to drive App out of space issue, one of my cube essbase BSO is corrupted and I'm trying to restore it from the backup.

  
  

  I deleted files .esm & .tct and all the other temporary files, .pag deleted and index files, .app and .db restored backup files, the cube is not starting and throwing the error below.

  Error: 1270005 error loading application 1054003: [Thu Jan 22 16:01:52 2015] Local/EPM_LGCY / / / 17120/Error (1270005)

  Fatal error: invalid page found in the global storage file in the location [0001.0001.00000002]

  I copied the support environment of backend application and tried to launch the cube but still the same error.

  I tried to delete the cube of EAS and still the same error. No doesn't work on this cube, and every time he throws the same error.

  Could someone please explain what the error "invalid page encountered in the global storage to the location file" means and how to fix this?

  Any information is greatly appreciated.

  Thanks in advance

  Srini

  Try the following support document - "Essbase 11.1.2.3.500 by that Block Storage Option (BSO) Application fails to start the errors related to a global Application of the Option (ASO) storage (Doc ID 1667664.1)"

  Essentially to delete the ASO app under the location of the hybrid - /user_projects//EssbaseServer/essbaseserver1/hybrid /.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Global storage settings

  Using Firefox on XP Pro machine, I put my settings from Global Storage to not allow third-party Flash content to be stored on my computer and not to store common Flash components. Why these settings back 'on their own' even within a single session? Also, how can I prevent Flash Cookies?

  Thank you!

  Hi, you can be sure that CC Flash. Well, I know that FF is a plugin/addon/extension(not sure which) called Better Privacy that does this. If I remember correctly, you can select the sites you want to have cookies.

  As far as I know is not something like that for IE, or at least that I have heard of. Now, IE9 has a new feature called Tracking protection which I think can do what you want to do. And yes I know that IE9 is not available for XP, because I use XP :-)

  IE8 Private Browsing and some other features that are not IE6/IE7, then you want to check out these features. If they have something to do with cookies, I don't know.

  In IE > tools > Internet Options under the Privacy tab, check your cookie settings there. Perhaps an adjustment can be made.

  If someone is tracking my work computer, all they get is my notifications by e-mail of the Flash Player Forum and the Forum of Flash Player :-) They probably just gave up and stopped followed me, ha - ha

  Thank you

  eidnolb

• keep the desire hp 4500 longer

  Envoy HP 4500 will not stay on more than 15 minutes, why?

  Ah if it does not power as you say.  Looks like that is happening in mode 'sleep' which is the default, and should do.  Can you wake up by pressing any button or front?

• Linked excel tables in InDesign CS5 update problems and keep the formatting: need help

  I've been using excel to place several tables in my InDesign CS5 document which will require the update on a regular basis. The tables are already formatted in excel, so I will place in InDesign with formatting and you will usually have to reduce proportionally the tables as soon as they are in InDesign CS5. When I'll update the links, it is important the content of the tables as part of current text with larger text and I am unable to "Insert the picture content" or "shrink content proportionally." Nobody knows how to solve this problem or know of another way to link excel with formatting tables and update without having to reformat the table (i.e. to resize the image and text) every time that happens an update? Thank you!!

  Can't do it, sorry. Tables only.

  Bob

• Computer configuration settings vs the Configuration settings of the user - we earn?

  Just a niggling question that I can't get an answer for.

  What happens when a Group Policy object has some computer configuration settings that are the same as some user configuration settings?  Of course applied at startup computer settings and user settings are applied when the user logs on.  I just assume that user configuration settings will override the computer configuration settings?

  Thank you

  Hi Matthew,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have questions about group policy that when we connect to the computer not user configuration, settings replace the computer configuration settings. Please correct me if I misunderstood.

  Matthew, I recommend you click on the link and post your query it as this category of the forum alone treats the group says http://social.technet.microsoft.com/Forums/en/winserverGP/threads . If you need assistance with Windows, you can always come back to us and we will be happy to help you.

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 114 the desire: my HP Envy 114 sometimes works, sometimes doesn't work with WIFI - it of maddening! Help!

  Hello!  Help

  I use an Apple IMac with my desire.  Since the day that I bought it, it is quite tempremental. Sometimes the wifi works, sometimes it doesn't... often I have to go through the procedure of the full wizard and re-install the password of our wifi (which is a mile long, so it's not phone). Wifi works throughout the House and is strong, so is not the issue. the little blue light flashes and turns off right now, and disconnect, restart it, nothing seems to make it work

  then, suddenly, if he decides-it can print a page.

  It has been 18 months since I bought it and I just want to scream. I have wasted hours and hours of my day coaxing to work!

  I've never managed to get the scanner to work, either...

  Can someone please help! I use Mac - OSX 10.95 products

  I think to have a USB port and attach it and done with this wifi - but what is the point of having this beautiful instrument, if it never works?

  is there a problem?  can it be restarted and keep the wifi settings? How stay blue and not turn on and turn off that darn light?

  Help!

  Hey @janinedigi,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you experience an unstable WiFi connection when you use your HP ENVY 114 e-all-in-one printer.  I would like to help.

  When users report this kind of problem, I generally recommend from scratch with the installation program. Namely, start this process of restoring factory default values * of your printer.  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • In the front panel of your printer, press Setup key wrench
  • Touch tools
  • Support on restore defaults.

  Then fix permissions of the disc on your Mac - click here for instructions.

  Once you complete these steps, you will need to re-enable wireless and Web services (if you are a user of ePrint).  Before doing this, click here for extensive troubleshooting and configuration steps for the question says that you are a statement.  Work your way through the Solutions in the order presented.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device

  Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device.

  iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.

• Air iPad with iOS 9.2.1 in 'Settings' under the Safari icon HomeKit icon does not exist (and is not possible to configure HomeKit)

  Hello:

  I have iOS 3 devices: iPhone 6, iPhone 5, iPad Air all with the latest iOS 9.2.1.

  I bought a Netatmo Thermostat, with the HomeKit technology.

  In the iPhone 6 there in 'Settings' under the Safari icon HomeKit (configure) icon.  BUT in the iPhone 5 and iPad Air does not exist the HomeKit icon (and it is impossible to configure HomeKit and link the Thermostat).

  Tank you for help me!

  In the article below, it seems confugure Homekit first by downloading the app from the manufacturer.

  Use the HomeKit accessories compatible with your iPhone, iPad and iPod touch - Apple Support

• Is there a tool out of all the windows configuration settings? (gpedit.msc, services.msc)

  I am trying to build an audit tool to extract the Windows of my environment settings, and it compares with planning what I defined. This baseline scenario specifies in detail what settings should be enabled / disabled / how it should be configured.

  Because it is a large scale environment, and I know exactly what I need, I would build a tool of mine.  I've used such gpresult and secedit commands to get the settings but I can't get all the settings.  I've already got many settings in the registry, but it works to be a bit heavy.

  Most of the settings I need are in gpedit.msc, services.msc, although I can't get in/out these values by using a script.

  For example -.
  Store passwords using reversible encryption for all users in the domain = on (or off)

  This setting is in gpedit, but I can't find this setting in the registry / other functions of command line.  I noticed that most of the information is readily available in gpedit.msc / services.msc although I don't know how to automate the extraction of these parameters.

  Could you please help to automate the extraction of these parameters?  I want ths process is transparent to the user / server administrator to reduce the interaction required for the information.  A macro will not allow the extraction of these parameters, while the computer is locked.

  I'm looking for Windows 2003, XP and 7.

  Thanx

  Hello

  Your Windows Xp issue is more complex, while we usually answer on the Microsoft Answers site, you can post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• PSC 2510 - wireless configuration - "error while saving the settings of the device.

  While trying to configure my PSC 2510 to be wireless I get an "Error." error while saving the settings of the device. This comes after selecting the network connection, select printer device, choose WEP, enter key and clicking next.

  PSC 2510

  Windows Vista

  Using the latest HP sfotware to install

  Thank you

  Dennis

  PROBLEM SOLVED... based on PrintDoc response to penn (refrence section "C4385 printer - Netgear DGN2000 Wireless Setup".-

  PrintDoc response has helped me find my problem (to reset the network settings on the printer to the factory) if different same printer.

  Thank you

• Keep the last settings of the menu

  Just changed in CS5 for CC.  In CS5 tools as emphasis would keep the last settings I used, which were of Villa close to what I wanted next time.  In CC, it's always back to its default values.  Is it possible to change so that it remembers the last setting I used.  (With the help of Windows BTW)

  Hi greatwill,

  Most of the dialogs for the filters are always sticky. If you left the program normally, settings used last will write to the preferences and be there for you when you return to them in another session. Changes to your preferences in the preferences dialog boxes paste, or none of your preferences if written when you quit Photoshop and restart?

  It could help others help you, too, if you want to say what version of Windows. I don't use Windows, but many do here, and if there is a problem with get your preferences written to disk when you leave, they might know more on this subject.

• How to configure Acrobat DC to keep the screen on while reading the PDF?

  My phone is set to exit the screen after 30 seconds and lock automatically.

  While I read any PDF on Acrobat DC - screen turns off after 30 seconds.

  How can I set up Acrobat DC to keep the screen on continuously during I read any PDF file?

  Hello

  Have you tried to activate 'Screen brightness Lock' for the application Acrobat DC?

  For Acrobat DC for Android, the option is available in the app.  The action menu, and select settings > brightness screen lock.

  

  For Acrobat DC for iOS, the option is available in the iOS settings screen.  Go to settings > Adobe Acrobat and choose lock screen brightness.

  

  The option prevents the screen from dimming/turning off when Acrobat DC is running in the foreground, which in turn prevents your locking device.

  I hope this helps.