Update ATML report header with the data collected during the execution of the test?

Similar Questions

• sql Update query after matching with the string

  I am trying to reach the query that updates a table column with the value of the other table, after that he finds an exact match.
  
  So here's the table data and sample to create.
  

  create table code1 
  (
      codeid number,
      codedesc varchar2(60)
  );
  
  Insert into code1 values ( 1,'R1 CONTRACTS');
  
  Insert into code1 values ( 2,'R2 CONTRACTS');
  
  Insert into code1 values ( 3,'R3 CONTRACTS');
  
  Insert into code1 values ( 4,'R5 CONTRACTS');
  
  Insert into code1 values ( 5,'R9 CONTRACTS');
  
  Insert into code1 values ( 6,'R10 CONTRACTS');
  
  create table table1 
  (   
      tablekey number,
      prefix  varchar2(25),
      codedesc    varchar2(60)
  );
  
  Insert into table1(tablekey,prefix) values (1,'1001PAC');
  
  Insert into table1(tablekey,prefix) values (2,'1001MXT');
  
  Insert into table1(tablekey,prefix) values (3,'1002PAE');
  
  Insert into table1(tablekey,prefix) values (4,'1003PCS');
  
  Insert into table1(tablekey,prefix) values (5,'1004BDX');
  
  Insert into table1(tablekey,prefix) values (6,'1005PAC');
  
  Insert into table1(tablekey,prefix) values (7,'1006PAC');
  
  Insert into table1(tablekey,prefix) values (8,'1007LDR');
  
  Insert into table1(tablekey,prefix) values (9,'1009LCR');
  
  Insert into table1(tablekey,prefix) values (10,'1010LBR');
  
  Insert into table1(tablekey,prefix) values (11,'ABCDEF');

  I'm writing a query that would update the value of column - codedesc (currently Null) of the table1 table: after it is a string of column - table code1 codedesc.
  
  The logic for the match is, - take - 2nd column of table-codedesc code value and get 2 characters. For example, when the string is - R1 CONTRACTS, the string will be 1. (Select substr ("R1 CONTRACTS, 2, 2) of the double). -Output will be 1.
  
  Now,.
  Look in table 1 for the 3rd position of the prefix that corresponds to the string returned by the query above. So, if the prefix is '1001PAC', it should look for 2 value of figures from the 3rd position. So, in this case it will be 01. Digitally 01 and 1 are equal, then the match is found for this line in the table1 table, so we will need to update the value of the column codedesc with the "contracts of R1.
  

      tablekey,    prefix            codedesc    
  ---------- ------------------------------------------------------------
  
        1               1001PAC     R1 CONTRACTS    -- Needs to be update with this value. 
        2               1001MXT     R1 CONTRACTS
        3               1002PAE      R2 CONTRACTS
  ...
        11             ABCDEF                                --Null ( No Need to update when no match found).

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for Linux: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  Appreciate your help.

  Hello

  You want to avoid TO_NUMBER, given that will cause an error if even a line has a number no (except space) in the wrong place.
  Use RTRIM to remove extra spaces at the end of the match_key and LPAD to add '0', if necessary, at the beginning:

  MERGE INTO     table1          dst
  USING   (
            SELECT  LPAD ( RTRIM ( SUBSTR ( codedesc
                                   , 2
                                 , 2
                                 )
                            )
                       , 2
                       , '0'
                       )          AS match_key
            ,     codedesc
            FROM     code1
       )               src
  ON     (src.match_key     = SUBSTR ( dst.prefix
                         , 3
                       , 2
                       )
       )
  WHEN MATCHED THEN UPDATE
       SET     dst.codedesc     = src.codedesc
  ;
  

  Thanks for posting the CREATE TABLE and INSERT statements; It's very useful!

• is the new compatible update 37.0.1 with the norton toolbar? If not when?

  is the new compatible update 37.0.1 with the norton toolbar? If not when?

  According to Norton, he works with 37, https://community.norton.com/en/blogs/product-update-announcements/firefox-37-support-norton-toolbar

• my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  If you mean that Windows updates are not proceed with the installation, it is because the support of Windows XP Service Pack 2 ended on July 13, 2010, so no updates were available for this purpose since then.

  http://Windows.Microsoft.com/en-us/Windows/help/end-support

  To resolve this problem, you MUST upgrade to Windows XP Service Pack 3, which is covered and a link procided further to the bottom of the page at the link above.

  Rob

• Windows update keeps reminding me with the same updates

  Windows update keeps reminding me with the same updates

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 22:22 Monday, may 28, 2012

• Dynamic array, not filling, works very well with the test button

  I built a recordset object and tested with the Test button and the Recordset returns my data on my remote server.  I then put a dynamic array on my php page that it points to the recordset of this work and that the PivotTable is empty.  The table displayed in design mode correctly with the recordset.vcolname, but when running that data are not to be connected.  I even tried just drag a few pieces of data on and still no data.  Any help would be appreciated.  Have a great day!

  There are a lot of things I want to mention, but do not have the time to.

  I'll start with the fact that you are using soon be deprecated MySQL instead of MySQLi or PDO.

  Second, you can't have your markup in the head section of your document as in

  Third, none of the session variables will not work if you start the session after your conditional statements. In other words, session_start() should be at the top of your document.

  There is more, but lack of time prevents me from analyzing those.

  My advice is to start with my third point, which is to place the session_start() at the beginning of your document and see if that changes things.

• I want to stop with the 'TEST' user base

  Hi all
  
  I use Oracle 11.1.0.6 / Windows XP.
  I want to stop with the 'TEST' user base, that I created in the database.
  What role/privileges, I need to assign to the user 'TEST' for the stop of the database with this user.
  
  Thanks in advance.
  Anil

  Hello..

  Satish has already provived the link to the oracle documentation. Go trough it.

  The same doc: -.

  >
  When you connect with SYSDBA or SYSOPER privileges, connect you with a default schema, not with the schema that is generally associated with your username. This scheme is SYSDBA SYS; for SYSOPER schema is PUBLIC.
  Connection with administrator privileges: example

  This example shows that a user is assigned a different schema (SYS) when connecting with the SYSDBA system privilege. Assume that the sample oe user has been granted the SYSDBA system privilege and issued the following instructions:

  CONNECT oe/oe
  CREATE TABLE admin_test (name VARCHAR2 (20));

  Later, oe user makes these statements:

  CONNECT AS SYSDBA oe/oe
  SELECT * from admin_test;

  OE user now receives the following error message:

  ORA-00942: table or view does not exist

  After having connected SYSDBA, oe user references the SYS schema, but the table has been created in the oe schema

  >

  Anand

• Update or merge it with the return data

  Hello, I want to do an update in a single statement, and select (I want to get the data and update a field in one of the tables involved with a timestamp), I tried this:

  merge into table t

  using (SELECT ... a long and complex select...) e

  on (e.ID = t.ID)

  When matched then

  update the value t.ts = systimestamp

  e return

  It does not work because his return does not seem possible with the merger, he did the update but I get no data...

  With an update, I tried:

  Update

  (

  SELECT...) e

  Aliens set = systimestamp

  And I get ORA-01779: cannont change a column that maps to a table of key-preserver nonkey.

  The select is complex with many paintings and selects involved and more than 20 KB of text only select... and this isn't mine so I want a solution that does not need to change the internal selection if possible.

  Any ideas? Sorry for my limited knowledge of sql :-(

  No, you did not read what I said.  The RETURNING clause allows you to capture the details of the update table.  You may not have the details of the complex query that you use to determine the return lines.  There is no way in SQL to a single statement that updates a table and queries data from other tables at the same time.

  The best you're going to manage is to update the data, turning the ID (or regardless of the primary key is appropriate) and then query the query data complex where once again the ID in your collection.  However, it's really messy.  What US the real purpose of all this?

• How to select the group header with detailed data in a SQL

  Dear Sir
  
  I wish I had a little help from you. My goal is to create a view where the data should be in the appropriate format. In this format, I want to have for each header of a group.
  
  I have 3 tables that they ar connected to the other (representing hierarchical data where financial plan breaks in different groups).
  
  CRM_PLAN
  CRM_PLAN_ID
  DATE
  AMOUNT
  
  CRM_PLAN_PE
  CRM_PLAN_PE_ID
  TITLE
  AMOUNT
  CRM_PLAN_ID (REF CRM_PLAN key. CRM_PLAN_ID)
  
  CRM_PLAN_MONTH
  CRM_PLAN_MONTH_ID
  YEAR
  MONTH
  AMOUNT
  CRM_PLAN_PE_ID (foreign key to CRM_PLAN_PE. CRM_PLAN_PE_ID)
  
  Data looks like:
  
  CRM_PLAN
  CRM_PLAN_ID | DATE | AMOUNT
  1. 01.01.2012. 500
  2. 01.02.2012 | 200
  
  CRM_PLAN_PE
  CRM_PLAN_PE_ID | TITLE | AMOUNT | CRM_PLAN_ID
  1. Organization 1. 100. 1
  2. Organization 2. 400. 1
  5: 3 organization | 200 | 2
  
  
  CRM_PLAN_MONTH
  CRM_PLAN_MONTH_ID | YEAR | MONTH | AMOUNT | CRM_PLAN_PE_ID
  1. 2012 | 1. 60. 1
  2. 2012 | 2. 40. 1
  5: 2012 | 1. 350. 2
  4. 2012 | 2. 50. 2
  3: 2012 | 1. 200 | 3
  
  
  I would like to than the view that returns data as:
  
  MONTH | AMOUNT
  Organization 1. null
  1. 60
  2. 40
  Organization 2. null
  1. 350
  2. 50
  3 organization | null
  1. 200
  
  The main question is hot to write a sql as source for display to insert before each group a line with the value of the title of the table CRM_PLAN_PE column. Is it still possible? Perhaps you could suggest another method.
  
  Notice will be used in the form of oracle where will be possible to change the data - I will make the necessary arrangements by trigger INSTEAD of.
  
  Kind regards
  Igor
  
  Published by: user5528050 on 29.11.2012 02:23
  
  Published by: user5528050 on 29.11.2012 02:24
  
  Published by: user5528050 on 29.11.2012 02:25

  Hi, Igor,.

  In this case, I think ROLLUP is a little simpeler GROUPING SETS, but you could do it anyway:

  SELECT       CASE
             WHEN  GROUPING (tab2.id) = 0
             THEN  TO_CHAR (tab2.id)
             ELSE  tab1.title
         END               AS col_1
  ,       SUM (tab2.amount)     AS col_2
  FROM       tab1
  JOIN       tab2     ON  tab1.id     = tab2.tab1_id
  GROUP BY  tab1.title
  ,            ROLLUP (tab2.id)
  ORDER BY  tab1.title
  ,         GROUPING (tab2.id)     DESC
  ,            tab2.id
  ;
  

  If tab2.id cannot be NULL, you can use

  NVL ( TO_CHAR (tab2.id)
      , tab1.title
      )
  

  instead of the CASE expression and simplify the ORDER BY clause to

  ORDER BY  tab1.title
  ,            tab2.id            NULLS FIRST          
  

• (Note) - report - Bluetooth with Enhanced Data rate software II for Windows 7 wipe main drive

  All,

  It was reported that when the upgrade of the Bluetooth with Enhanced Data rate software II for Windows 7 to version 6.4.0.1700 is originally a wipe on the OS main drive (usually C:\)

  Version:	6.4.0.1700
  Release date:	16/05/2011

  Here are the units that uses this version of the driver.

  Support models     ThinkPad L420, L421
                     ThinkPad L520
                     ThinkPad T420, T420i, T420s, T420si
                     ThinkPad T520, T520i
                     Thinkpad W520
             ThinkPad X1
                     ThinkPad X220, X220i, X220 Tablet, X220i Tablet
                     ThinkPad Edge E220s
                     ThinkPad Edge E420, E420s
                     ThinkPad Edge E520
  

  Has been raised to engineering and the team is currently working on this topic.

  Please do not update the Bluetooth driver until further notice *.

  We are in a process to pull the driver from the Support Site and ThinkVantage System Update

  Main thread here

  JMT

  
  

• I have update problems that interfere with the operation of the Overdrive Media Console software compared to WMA files.

  Windows is completely up to date through the date of this post.

  OverDrive Media Console
  -MP3 download and play perfectly
  -Download error 0xC00D2751 for all WMA files (~ 80% of audio book from the library files are downloadable in this format), informing me to contact Microsoft.

  Solution on the Microsoft website:
  -http://support.microsoft.com/kb/913800
  -The patch will not install.

  Journal of problem with the installation of the hotfix:

  [KB913800.log]
  0.031: ================================================================================
  0.031: 2009/11/16 (local) 18:35:17.508
  0.031: d:\9b8cb172a0ae06ea215f6af0\update\update.exe (version 6.2.29.0)
  0.046: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  0.046: hotfix started with following command line:
  0.078: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  0,109: SYSTEM\WPA\MediaCenter\Installed is equal to the Value specified
  0,109: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is not equal to specified value
  0,109: second Condition in Prereq.CheckRegistry.Section failed
  0,109: Check condition for 1 line of prerequisite returned FALSE
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: KB913800 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  0,109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  0,109: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB913800 failed. For more details, check the c:\windows\KB913800.log log file
  20.343: user input: OK
  20.343: Update.exe extended error code = 0xf0f4
  20.343: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Cannot find another solution on the Microsoft site.

  Back emails with Microsoft technical support has failed to a solution.  Beyond to download the fix will not download, they have no extra information for me.

  whitepawn23,
  Are you having to provide updates through Windows Update?  If so, I suggest that you perform a clean boot , and then run Windows update.  If you continue to have a problem with a certain update you need to download and install it manually.  Alternatively, you can consider removing the Overdrive program and new test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• After my wife update Dell 755 USSF with the latest updates I am told that my copy of windows is not genuine.

  He spent the real profit in the past and the original software that was installed with the purchase. After 3-4 years microsoft decide to play the stupid guys. Views or suggestions would be welcome. Operating systems Windows XP Pro SP3 and up-to-date with updates irritants.

  Kind regards

  Den.

  Hello there and thanks for your reply. I've sorted it by twisting the system and removing the unwanted annoyance.

• After update of Windows 7 with the last KB 'Reliability' updates, wouldn't Boot: Boot mgr failed, cannot find the OS loader

  After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.

  Root cause found:
  ----------------------
  Boot Manager cannot find the OS loader

  Repair action: repair of files
  Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">
  Time taken = 4206 ms

  Repair action: repair store boot configuration data
  Result: Has no = 0 error code x 490
  Time taken = 221 ms

  Repair action: System Restore
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 44444

  How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting?  What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.

  What are the solutions?

  Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Why can I no longer updated my Site created with the Muse?

  I had Adobe Creative cloud for a few years. I also have a Web site (http://www.amazineasheville.net) created with Muse and hosted by Adobe.

  Meanwhile, I could easily make updates and publish them on my site.

  Suddenly, three or four weeks, I no longer can get my updates of the website published on my site. Instead, I get the display options on a site that uses a businesscatalyst extension. I can't post to my actual website address.

  No matter what selections in the menu of Muse that I choose, I can't have my updates published on amazingasheville.net. Since June 19, I couldn't update my real site, just the version Business Catalyst of it, which is not visible to the public.

  What has changed? That's happened? What is going on?

  I don't have a site program that does not allow me to make changes easily!

  Thanks for any help.

  It had to do with the folder on the server. The Options menu after I clicked on publish showed a certain folder, and told me that I should just leave this entry blank. That seems to make the difference.

  Nancy, I think you were on the right track on the problem.

  There is also a new update (I remember correctly, it's dated July 20) dreaming that I saw for the first time today and applied, and which also seems to be involved in the solution. The person who called me Adobe said there have been some problems with the Muse that resolved the last update.

  I'm a writer, mostly books on the retirement and travel, not a Web site developer or graphic designer, 80 or 90% of Adobe Creative Cloud is so over my head and little value convenient for me, but to get a few components of CC I need, I have to buy a subscription to the whole.