Update BIOS HP F.64Ap1 (8th bios update for my HP Envy laptop)

Similar Questions

• HP ENVY 700-230ea desktop: looking for advice to update for my HP ENVY 700-230ea desktop computer

  Hi all

  looking for advice to update for my 2 year old want 700-230ea descktop

  thought in the following way

  Replace the boot wth drive a fast SSD

  Doubling of the Ram of 16 MB to 32 MB

  Add a better graphics card.

  Just struggling to find compatibel points, so everyone has any idea, what type of memory should I watch so that its compatibility with the existing 2, 8 meg sticks

  SSDS seem to be a source of confusion that mine field that I should look for use as boot drive.

  Graphics card will be limited to what the power supply can turn off, someone knows what it supports current graphics cards go.

  Thanks for any help on this.

  @Paul80, welcome to the forum.

  Here's memory and SSD who are recommended by Crucial memory.  They make great products for OEM computers.  You have to open the case and check of installed memory brand.  Then contact the Crucial Tech Support to see if their memory will be compatible.  The main problem with the addition of memory, it's buy the memory that is compatible with existing modules.

  The best way to install the SSD, it's letting the existing connected HARD disk as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the cloning software that you will use on the HARD drive.  Open and select the SSD as target disk.  Once the SSD is cloned, disconnect the HARD drive and start.  The start of shoul for the SSD system.

  As for a video, here is a card that has very good reviews.  Read the reviews to see what users have to say about it.  It should work well with your power supply unit (PSU).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion 15 not: SSD update for HP Pavilion 15 laptop

  Hello!

  I use PC HP Pavilion 15 Notebok (F6C42PA #ACJ). It came with Win 8.1 pre-installed on a 1 TB HARD drive. I updated the OS to win 10 and now upgrade my HDD to SSD. I was wondering if TS256GSSD370S Transcend and Samsung Evo 850 is compatible with my laptop. Also how to enable AHCI mode? I don't see such an option in the BIOS.

  Thank you.

  15 - n203tx is the model. Here is the Service Manual:

  Manual

  The compartment access hard drive appears on p. 59. As you can see, it's a bit more involved.

  Don't fall into the trap of overthink. The laptop is in ahci mode and you can not set otherwise. With Windows 10 an SSD will be automatically recognized as such and optimized. Your question only real tech is to get the software on the new SSD. After the back if you need some help with that.

  The Samsung Evo 850 is my choice, but the Transcend would work too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to get updates for Firefox on my laptop.

  I get that my Firefox is still to date, but cannot find the place where or what is the most updated version of it and
  How do I know that it updates automatically.

  Scribe_uk said

  Hi, you can check for updates and your version by going to-main menu > help (question mark at the bottom) > on Firefox.

  Wow, I didn't know that you can access from here! Thank you! + 1

• HP Pavilion 15 laptop: HARD drive SSD update for HP Pavilion 15 laptop

  Hey there!

  I own a HP pavilion 15 notebook PC, [model number: F6C42PA #ACJ]. Currently, it is equipped with a 1 TB SATA HARD drive. I was going to upgrade to SSD. Kindly guide me through the steps and the compatible products. Also is there a simple way to just walk into an authorized service center of thm Center and ask to do the upgrade?

  Thank you

  Here is the Service Manual:

  Manual

  See page 59.

  Not your model exactly but very close and videos may be more useful.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c04324972&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0001

  Any form factor of 2.5 in SATA SSD will work and I recommend a Samsung Evo 850.

  http://www.Newegg.com/product/product.aspx?item=N82E16820147372&cm_re=Samsung_850_Evo-_-20-147-372-_-product

  There is a link for all sizes available on the page. I recommend that at least a 256 and 500 are quite affordable nowadays.

  Where do you live? Country only, please. I heard that HP Service centers will perform memory and SSD upgrades on these 'closed' systems but I don't know where all of them or what they would charge. You should be able to find a competent local computer shop to do. It does not put security at risk, but the warranty is not revoked if the work is done properly, without damage to the laptop.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ENVY 14-k124TX: SSD update for more storage (ENVY 14 k)

  Hello

  I have a 14-k124TX currently Envy and you want to upgrade the disk SSD 128 GB to 500 GB.

  The vehicle currently has a samsung mzmtd 128 and I want to use a Samsung 850 EVO series. I opened my laptop and I'm confident on the evolution of Physics in the. I meausred the exsisting SSD and it corresponds exactly with the specifications of the new, so I'm also confident it will fit.

  I'm after some advice on

  (A) the computer will be able to use the SSD physcally (I'm sure it would but I better check)

  (B) what is the best way to transfer the operating system and all my personal files and programs, I would also be able to buy an MSATA USB3 case if necessary.

  Thank you in advance, all the tips

  Griffin.

  @griffin040

  griffin040 wrote:

  Hello

  I have a 14-k124TX currently Envy and you want to upgrade the disk SSD 128 GB to 500 GB.

  The vehicle currently has a samsung mzmtd 128 and I want to use a Samsung 850 EVO series. I opened my laptop and I'm confident on the evolution of Physics in the. I meausred the exsisting SSD and it corresponds exactly with the specifications of the new, so I'm also confident it will fit.

  I'm after some advice on

  (A) the computer will be able to use the SSD physcally (I'm sure it would but I better check) Yes. The Samsung EVO 850 has the same factor of interface and the form (2.5 '')

  (B) what is the best way to transfer the operating system and all my personal files and programs, I would also be able to buy an MSATA USB3 case if necessary.  Download and use the tool to migrate data from Samsung and a usb cable to sata. The transfer will be quick and painless. Let the original SSD in place during execution of the migration and Exchange later in the new Samsung EVO 850.

  Thank you in advance, all the tips

  Griffin.

  I have a Samsung EVO 850 and really like it.

• Video update for DV7-4087 cl laptop PC?

  
  

  Hi Fabio,.

  See Page 98 of your Service & Maintenance Guide for a list of compatible processors.

  Sorry to say, but it is not really practical to change your video card - your existing Intel physically soldered to the motherboard chip and therefore, is not an evolutionary element.

  Kind regards

  DP - K

• HP G62 notebook computer: model bios update for HP G62 laptop need: WJ544AV

  Hi, I need a bios upgrade for a HP G62 laptop model: WJ544AV but when I search this site a different model appears in the results.

  Here are the results:

  http://support.HP.com/us-en/product/HP-G62-200-notebook-PC-series/4150047/model/4188395

  I don't know if it's okay.  I don't really want to install the incorrect BIOS upgrade.

  all of the suggestions.

  Thank you

  Hello:

  The number of product that you posted indicates that you have this model...

  HP G62t-250 CTO Notebook PC.

  If your model has an Intel processor, then you are on the right page.

  The update of the BIOS is for models of the Intel only.

• Qosmio G30 - BIOS need to be updated for Windows 7

  Hey,.

  I am trying to install win7 (not beta) on Qosmio G30 (PQG32E with HD-DVD).
  I begin the installation, and copying the files on the hard drive. Then the computer restarts for installation.
  But every time you start ends in a blue screen with the error: stop 0x0000007E. The text of the blue screen is not little say on an update of the BIOS. But there is no latest BIOS available on the Toshiba site. BIOS 3.90 is installed. There is no other is available.

  XP and Vista runs without problem.

  BIOS with a standard configuration.

  Concerning
  File

  Hello

  I don't see any question in your message, but you probably want to know if Toshiba will offer BIOS updates. I am sure that nobody here can give you a definitive answer but, in my opinion, Qosmio G30 will be not supported with Win7.

  The first series of Qosmio G30 is delivered with WXP MCE and later with Vista. Thus, this model of laptop is quite old. I watched how Toshiba treated with old laptops when Vista was on the market again and not over a year of two laptops have been supported. So I think with Win7 will be the same story. All laptops, not more than one year one or one and a half not will be not supported for Win7.
  I think in the future that Toshiba does not update the BIOS designed for Win7.

  Of course, I wish wrong me about this, but the future will show whether or not it is just my opinion.

  In any case, good luck.

• Pavilion Media Center M8400f Bios Update for Windows 7

  HP Pavilion Media Center m8400f. The Vista operating system has been replaced by Windows 7 (64 bit) a number of years.

  I've updated one of my hard drives with a SanDisk SSD (it is now my main drive with the operating system and all my files on board).

  The bios on the PC has never been updated.

  The SanDisk SSD dashboard software will not recognize the SanDisk SSD as the system has designated the SSD as a SCSI device. I need to access the bios for this change to AHCI. The current bios does not support this.

  The PC has a card mother MCP61PM-HM. There is no update for Windows 7 BIOS for that motherboard I know (updates Vista only).

  　

  SanDisk gave me a link to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-82094-1&cc=us&dlc=en&lc=en&... that shows a card mother M2P61PM-HM for m8400f desktop PC. This Bios download supports Windows 7 (64 bit).

  Can update the Bios to download safely a card mother M2P61PM-HM for card mother MCP61PM-HM I currently have?

  Hello

  The HP BIOS update link provided SanDisk is an update of the BIOS of your PC. It is listed under Win Vista 64 bit driver downloads here.

  If you look at the site to download the drivers for your PC you'll only see driver support for Win Vista but on 2010-04-08, Version 5.29, 1.47 M BIOS updatedshows support for Win 7.

  But the problem is this: the BIOS updates must be performed using the PC operating system comes with; in your case, Win Vista. Extreme care must be exercised when updating the BIOS under normal circumstances. I would not classify your situation as usual.

  I saw others download an update of the BIOS for their PC and try to install an operating system upgraded with disastrous effects. The PC was bricked.

  Be prepared for the worst case if you try to install the update to the BIOS.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• HP ENVY 15-k004ne Notebook PC: update BIOS version for HP Envy 15

  Hello

  My operating system is Windows 10 and F.03 InsydeBIOS version.

  On the download software & drivers Hp site, there is no BIOS listed for my laptop for Windows 10.

  However, for Windows 8.1, F.07 BIOS version is listed for my computer laptop than the last.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K000-notebook-PC/6936206/model/7185540?SS...

  Can I update?

  Hi @ShreyansJ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Envy laptop: update bios still running

  I got a notice from HP that there are updates for my computer. I've updated all the recommended updates, including updated Bios. After 18 hours its always updated. How long it takes and what I'm doing now is so long?

  Hello

  The update should only take a few minutes, so if it worked for 18 hours, I'd say it's blocked - stop it should be Ok.

  When you stopped, close HPSA and download the Bios Update from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75152.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Kind regards

  DP - K

• HP ENVY 700-030qe: BIOS updates for my HP desktop computer

  I have a desktop HP ENVY 700-030qe with Windows 8. While looking through the updates of software available for my system, I have seen two listed in the BIOS:

  (1) HP Compaq consumer Desktop PC BIOS for ROM family SSID 2AF3 dated October 2014.

  (2) HP Desktop BIOS update system for PC HP ENVY 700/800/810 with 2AF3 family ROM dated May 2014.

  1. How will I know what family of ROM BIOS I have? I have pictures of all the screens of BIOS that I could get and nothing mentioned family BIOS ROM. I still have the BIOS original version KAI 80.07.

  2. the two updates apply to my computer? The wording is confusing. It seems that only the second apply to my system unless one applies to a more general category of the office. If both apply, as the first is the most recent, which would be the one to use?

  3. There is an issued for the BIOS in June security update that I ran across here. Which does not appear in the update list. Why would that not replace the other? Can I assume that the October update would include this security update?

  Thank you

  JohnD

  Hello @jpd_az,

  I read your post about how you're looking to update your system BIOS and what version of the software to install. I'd be happy to help you in this case!

  The version of the BIOS, you want to download and install is 80.23 A, which can be downloaded by clicking on the link below:

  • Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  To update this software, I recommend that you follow the steps described in this document on the updates to the BIOS.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows 8 - BIOS update for older computers?

  I use a Dell Dimension 4600 to test consumer Preview of Windows 8 (Yes, I know, it's a dinosaur).  Consumer overview works very well. However, the Preview version will not install. I suspect that it is because the BIOS is too old. (The currently installed version is S12).  Is there all the steps to upgrade the BIOS and expose the NX / XD bit in the BIOS security settings?

  Or, is there a work around to allow installation of Windows 8 Preview version on this level of the machine?

  Thank you

  There is no updated BIOS more for the 4600.  Updates usually does not continue beyond the end of sales for a given model, once most of the stability issues have surfaced and resolved.

  What kind of error get you when trying to install it?

• Need latest BIOS update for my Satellite M40

  Including the latest version of the bios with ati?

  My laptop
  M40 - 231 (PSM40E) ati x 600.

  Kind regards
  Michel Marinho

  Hello

  Satellite M40-231 is PSM40E.
  This number you will find at the bottom of the unit. Check the label.

  For the BIOS, you should check this site:
  http://www.toshiba-tro.de/subpage/BIOS.html

  I checked and it s a BIOS v1.7