Update dri to

Similar Questions

• What happened to the security icon (the lock is not displayed) with update to 6.0.2?

  I've just updated to FF 6.0.2 or on the States of pop-up FF and I noticed that the security icon no longer displays at the bottom of the screen. I checked under Tools/Options and find none to enable its display, same under notice. Could you please tell?

  COR - el of credit: in Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.
  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  The lock feature has been replaced by the identity button of the Site on the left end of the address bar.

  See also:

     http://www.dria.org/wordpress/archives/2008/05/06/635/
     https://support.mozilla.com/kb/Site+Identity+Button
     http://www.mozilla.com/en-US/firefox/security/identity/
  

  You can use this extension to get a lock on the address bar.

     Padlock: https://addons.mozilla.org/firefox/addon/padlock-icon/
  

• Since the update to the new version 6.0 I see more the lock of privacy secured on protected pages. Where at - it go?

  Just updated and am seeing the lock of privacy for secure websites

  In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.
  
  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.
  
  
  
  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/
  • https://support.Mozilla.com/kb/site+identity+button
  • http://www.Mozilla.com/en-us/Firefox/security/identity/

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• When I updated to firefox 6 I lost my lock of safety at the bottom right of the page when I enter secure sites. I still have security? of

  When you connect to secure sites, there was a lock on the lower right part of the page that shows that the site is safe and secure. If the secure Web site wasn't sure a red line would cover the lock. I don't have it more since I've updated from 3.8 to 6. Are my secure such as banking etc. always secure sites. Why have I lost this lock symbol?

  Padlock is therefore more part of Firefox; It has been removed from Firefox 4 the cadenas watch there is a secure connection, but provides no additional information. You could make a typographical error, and have always been connected to a secure connection. The lock was replaced in Firefox 3 with the Site identity button. Familiarize yourself with the Site identity button at the left end of the address bar:

  • https://www.Mozilla.com/en-us/Firefox/security/identity/
  • https://support.Mozilla.com/en-us/KB/site+identity+button
  • http://www.dria.org/WordPress/archives/2008/05/06/635/

  You can install this module if you want: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Having just updated for Firefox 4, when connecting to secure padlock GIS Web pages, n doesn't seem anymore. If anyone else has noticed this?

  Having just updated for Firefox 4, by connecting to a Web page that is secure, the lock sign does not appear. Any body noticed it?

  The lock is no longer a part of Firefox; It can give users a sense that a site is secure by not providing all the information related to a site. Familiarize yourself with the Site identity button in Firefox:

  • https://support.Mozilla.com/en-us/KB/site+identity+button
  • http://www.dria.org/WordPress/archives/2008/05/06/635/

  You can install an add-on to display a padlock in the URL/address bar:

  • https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Adobe Shockwave for Director Netscape plug-in, version 11.0
  • Adobe PDF plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r42
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update to Shockwave for Director
     • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
     • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
     • When the download is complete, exit Firefox (file > exit)
     • Locate and double-click it in the installer that you just downloaded, let the complete installation.
     • Restart Firefox, and look at your plugins.
     • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
  3. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox
. Run the Setup program that you have just downloaded.
• Use one of the links below:
  • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
  • See also the download link': http://get.adobe.com/reader/otherversions/
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers.
    • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
    • Note the separate links for:
      • Plugin for Firefox and most other browsers
      • ActiveX for IE

• Con vcenter Update Manager device

  Buenos dias:

  UNA duda as I have...

  In mi tengo el vcenter virtualizado sistem sober one of the ESXI con el device...

  El puedo usar update manager para el sistema fornuis? Donde puedo instalarlo?

  If deseo fornuis version 5 Update 1 as pasos debo seguir no tengo el update manager wont?

  Puedo hacerlo desde el boton del vcenter? o eso el vcenter actualiza solo? (Editor captured)

  Estoy perdido that

  Gracias

  Vale, now understood.

  Update you apply release parches of in una misma.

  Level are change of release.

  Actualiza primero el vcenter has v5 U1, UN client y con el vi client y vcli (descargala desde vmware.com)

  In ese mismo client, descarga los that dries Niños.

  PASA todas las VM a UN nodo y pon el otro en mantenimiento y empiezas an apply dries is upgraded

  vihostupdate --server host name or IP address -i -b location of the ESXi upgrade ZIP bundle -B ESXi410-GA-esxupdate
  

  Tienes mucho mas aqui http://pubs.vmware.com/vsphere-4-esx-vcenter/index.jsp?topic=/com.vmware.vsphere.upgrade.doc_41/esx_upgrade/patches_updates/t_host_upgrade_using_vihostupdate_esxi.html

  Mira a ver as tal.

• Since update 10.0.2 at 6s "trash all ' in the Inbox.

  Since I did the update (10.0.2) I can no longer just "trash all ' mail inbox (Verizon).  Because I get emails 300 + a day, I need to be able to empty my Inbox easily without deleting all of them individually.  It is very irritating and time consuming.

  Anyway around this?  Thank you...

  sharikay wrote:

  Anyway around this?  Thank you...

  Not at the moment. Tell Apple you want to come back.

  http://www.Apple.com/feedback/iPhone.html

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• I can't go to my bookmarks after update for Sierra

  I have a MacBook Pro. I just updated this week to Sierra with no problems, but now when I click on multiple points in the upper left corner to reveal my favorites and my playlist only, it displays the top sites page and does not open my favorites and reading list, as it used to.

  Can someone tell me how to access my bookmarks and playlist in the Sierra? I'm sure it's something in the settings or something escapes me. My Bookmark Bar is the top of the page, yet. I can't find my bookmarks and reading list.

  Thank you

  I thought about it, I had to go to Favorites on top and tell Safari to display in the Sidebar again.

• Calendar Apple App Bug frozen works only with iOS 10 update grrr

  Since I updated to iOS 10 (more more later than 10.2, etc.), everything was not too bad except THE APPLE CALENDAR app, its deiving me crazy when I click on the app it's like it freezes and past shift x 50 mode still something to do with the calendar app will cause either a frozen or a black screen or white and then crashed ack to main menu. Sometimes it will allow me to create but will be trolling with typing and finally crashed or not even save it... Please HELP I am sure what else to do, I tried to download google calendar and which seemed to have something of bug he loves too then something happens. And I tried to delete it and download it again, / force delivery, nothing has changed

  Hi there calsparks!

  Thank you for bringing your question on the calendar of freezing and trolling since the update to iOS 10 on your iPhone for Apple Support communities.  I rely on the calendar to keep my life organized, so I'm happy to help you resolve this issue today.

  Looks like you did a few good troubleshooting by force to leave the app, force to restart the iPhone and deleting and reinstalling the application calendar.  At this stage my next recommendation would be to backup your iPhone, then erase and restore your iPhone as a new device, then test calendar to see if it behaves correctly, and then restore your backup.
  

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• new iPhone update

  I have an iPhone 5 and will probably get an iPhone 6s with a new SIM from nano.

  My photos will remain on my iPhone 5 until I save them?  I don't want to put my new sim card in the iPhone 6 and then the old sim become inactive and lose my photos if that makes sense?

  Thank you

  Hello

  IPhone 5 should run ios 10.2 if not go to settings - about us - software update

  Do update on your WiFi.

  Then go to settings - iCloud backup now.

  The new iPhone set up on your WiFi when you are asked if you want to use iCloud backup say Yes.

  Use the same identifier apple then you will get all the apps / photos on the new iPhone.

  See you soon

  Brian