Update ESXi Build 474610

Similar Questions

• ESXi 3.5 update to build the network 158874 failed

  We have two HP DL380 G5 servers that came with VMware ESXi 3.5 on USB that is built into the server.

  Today, using VMware infrastructure update that updated to build with 158874, he successfully completed and has called for a restart of the server.

  It restarts fine, but since doing so, the server now can not see the network, all configurations are correct I restart network services and tried the management network test but nothing has worked.

  Everyone knows about this problem?

  Kind regards

  Mark

  Seems good.

  -KjB

  VMware vExpert

• ESXi build 623373 for SRM 5.0.1

  Hi guys

  check the SRM 5.0.1 software compatibility table (I have install this version because I work with SVC 6.3.0.x and the only compatible is 5.0.1 from any SRA for 5.1)

  Well said table vCenter 5.0 U1 is compatible with SRM 5.0.1.

  Well my client has ESXi 5.0 U1 Patch 5 build 702118

  so do you think it will be any problem with this ESXi 5.0. 5 way U1 version?

  or it does not matter the patch that is install just the major version?

  same question goes for said Table vCenter vCenter 5.0 Update 1 (build 623373) is compatible. Can I upgrade to 5.0 U1b (623373)?

  Thank you very much

  Hello

  1 patch does not matter, only the main version / update.

  2 vCenter 5.0.1b has the same compatibility as vCenter 5.0.1.

  Michael.

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• URGENT! How can I update the build on BB store

  Hi all..

  I want to update the build on BB store. Please help me how can I update the build on bb store after the download of version 1.

  Now, I need to download version 2.

  Thank you

  After signing, choose manage products, then in the line that corresponds to the product that you're gong to update, you should find an icon "+" under the heading of press.  A click on it.

  I don't remember having a problem, this the first time, so I suspect it's pretty much follow your nose after that.

  It is also available help documentation:

  http://developer.BlackBerry.com/DevZone/blackberryworld/adding_and_apps_and_releases_in_blackberry_w...

• How to update esxi 5.0 is installed on a USB key

  Hey,.

  I installed an esxi on a USB 5.0. everything works, I have two testgasts. now, I wanted to test win8 but it's seems I have to update esxi before. But how to update the USB? I have not found any doku :-(

  Thx for the help

  Welcome to the community,

  I'm not aware of a difference of correction/update ESXi on a USB device on a HARD drive. You can eiterh using a CD Update (for example, 1 day) or the vCLI as explained in the http://communities.vmware.com/people/vmroyale/blog/2011/09/15/updating-esxi-5--single-use-esxcli-how-to

  André

• ESX 4.1 Build 260247 to 4.1 Update 1 Build 348481

  What is the upgrade path?  I was able to update our server ESX 4.0 but due at the time of the new version, I had just installed 4.1 build 260247 on our new box of ESX.  Then update, we're out.  I used the Update Manager to upgrade the 4.0 server to the latest version (4.1 update 1 / 348481 to build using the file "upgrade-from-esx4.0-to-4.1-update01-348481.zip" via the Update Manager.)  Worked like a charm.  Now, oddly enough it doesn't seem to be a clear path to upgrade to 4.1 260247 4.1 Update 1 / build 348481.  I would have assumed it would be an easy task using the Update Manager.  What Miss me.  Any help would be appreciated.

  Thank you

  There is no need to manually download packages of fixes. After you install and configure the Update Manager, it will show you the fixes available in the repository. All you need to do is create a baseline with updated patches 1 and attach it to objects you want. Update Manager will automatically download patches. If not already fact, take a look at http://www.vmware.com/pdf/vsp_vum_41_admin_guide.pdf for more details

  André

• Did update ESXi 4.1 host via PowerCLI see option3

  Hello

  I have a test environment before going to Production Server two ESXi410 installed (1 ESXi and ESXi-2)

  Option1: ESXi-1, I've got vCenter and Update Manager. According to the documentation, I tried to use update manager add-in for vcenter. That went well to update host ESXi-2 with ESXi410 - 201011001.zip.

  No I haven't been in trouble for the installation of the update on the ESXi-1 which has the Update Manager. As I close the virtual machine and put the ESXi-1 in Maintenance mode.

  Option2: allowing the Support of Local and Remote Tech support (SSH) technology. In this way, I copied the file to update ESXi-1 data source using PuTTY. But esxupdate command does not find the file in the path (/ vmfs/volumes/datastore1/filename.zip). Then I copied to/var/tmp/cache and use the command esxupdate - bundle = filename.zip update. It also worked well.

  But the thing I've read in your documentation to use Install-VMHostPatch did not help me.

  Option 3: of vSphere PowerCLI. > Install-VMHostPatch - VMHost /var/tmp/cache/ESXi410-201011001.zip IP - HostPath-server IP - confirm

  gave me an error 5 No. OSError file or directory.

  Yet once, I tried to change the path to the data store:

  PowerCLI > Install-VMHostPatch - VMHost IP HostPath - /vmfs/volumes/datastore1/ESXi410-201011001.zip

  Please find attached the error in the image file.

  I want to use the PowerCLI update of the host and the VM. VMware has no documentation on this.

  Help, please.

  Mohammed Ali Rizwan

  Hello

  Install-VMHostPatch will work for you only if you want to update the ESX host, it will not help for virtual machines. It is the snap another powershell called VUM PowerCLI that you can download from here http://vmware.com/go/powercliupdate. If you want to use that snap-in you should have installed VUM server.

  Now on your current number. The answer that Luc wrote should work for you. In this example, there is a step that downloads patch files manually. The reason for this is the small size partitions on ESXi and usually there is no enough space to download large patch in the temporary folder of ESXi.

  In fact, you can benefit from this approach - if all your ESXi boxes are connected to the shared storage, you can download the patches on this storage once and then upgrade one by one.

  Kind regards

  Vitali

  Team PowerCLI

• ESX 3.5 Update 5 (Build 207095) Crash @ 30% with Update Manager

  Hi everyone, we are currently trying to update our ESX running 207095 build (new generation).  As soon as we do the remediation.  It starts to install without problem until it hits the 30% Mark.  At this point the update managers hangs and fails after 30 minutes saying "Update Manager has timed out...". "At this point i will accept a reboot in vCenter, and once he's trying to start at what was assumed to be GRUB I get this error:"Error 15 file not found"at this stage, we rebuild the host.  And it happened again on the fresh build.

  Here are the versions:

  ESX 3.5 Update 5 (Build 207095)

  2.5 U6 with Update Manager vCenter

  What we're doing wrong?

  check this post with the same problem http://communities.vmware.com/thread/178800;jsessionid=A7FDAFF76607E4B0BB8E2CF17C437E62

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Update esxi 3.5

  I need to perform an update through the Update Manager Vcenter to one of my hosts running esxi 3.5 update 4, embedded version of dell.  Once I click on sanitation, how long do you it will take to update?  It will take several reestarts as well?  I guess he's going to update all available for version 3.5, such as update 5, but it will not update esxi 4 will be?

  It will take 10 to 30 minutes.

  A reboot (probably).

  You will have a 3.5U5 version.

  André

• After update Folio Builder Panel 1.1.3. Items to keep in the loading

  Hi all

  After update panel Builder Folio as requested (by the Panel it self), we cannot access any article. A loading icon stops animating and grey stay article-records. Anyone know how to fix this?

  Research before hear you.

  Kind regards

  Remco van den Hout

  Hi Remco,

  This article has been published: http://kb2.adobe.com/cps/913/cpsid_91340.html

  This problem is caused by with older versions of the Folio Builder Panel which are not compatible with the current version of the code Server Digital Publishing Suite.

  Information on the installation of plugins creating content for the creation of Folio: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  With sincere friendships.

  KlaasJan Tukker

  Adobe Systems Benelux

• Installed ESXi 5.1 update 1 build #remains to 1065491 after reboot - why?

  Hoping someone can point in the right direction here. I installed the update 1 on server ESXi 5.1 my client the weekend via SSH, don't got no error, but the response of reboot needed. Rebooted the host but he build number has not changed. Is there anything else that I need to do or a certain command to restart that should be used?

  Hello

  If I understand correctly that you upgraded to 5.0 Update 1 and it still shows the version number '1065491 '. However, the update version number 1 is 1065491. It has been upgraded to update 1.

  Refer to the KB: 1014508 for your information...

• How can I update ESXi 5.0.0 Build 469512 with the latest patches

  I have the free version of VMware ESXi installed 5.0.0, build 469512.  When I try to download Update01, I get a message saying that I had no right to the update.  It is about creating a new, so I want her to be perfectly up-to-date before installing a virtual machine.  How can I change the version free with the latest security and feature patches without buying anything?

  You can download the update - from - esxi5.0 - 5.0_update01 patch in the download link for the Patch I posted above.

  I don't know if the installation of update 1 CD / ISO is available when you sign up for the free hypervisor well (I didn't try yet).

  André

• Update ESXi 4.1 Build 260247 to ESXi 4.1 Update 3

  Hello

  I want to update a stand-alone host to ESXi 4.1 Update 3. I don't have vCenter or VUM in the environment (yet). I downloaded the bundle "update - from - esxi4.1 - 4.1_update03.zip" and have the vSphere CLI installed on my workstation.

  I use vihostupdate.pl to check the server and the applicability of the patch before I go and install and he seems to think there is nothing there to install.

  From what I can tell, this is a cumulative update and I have not read anywhere that I need to install the update 1 or 2 update as a prerequisite, so why are they not those detected?

  Here is the output from the various controls:

  vihostupdate.pl - servername - list - package update - server-esxi4.1 - 4.1_update03.zip
  Enter the user name: root
  Enter the password:

  -Bulletin ID - summary-
  ESXi410-201208101-SG ESXi 4.1 Firmware updates
  ESXi410-201208102-SG updates the ESXi 4.1 tools
  ESXi410-201208201-UG is updating the Firmware of ESXi 4.1
  ESXi410-201208202-UG updates tools ESXi 4.1
  Full ESXi410 - Update03 VMware ESXi 4.1 update 3

  vihostupdate.pl - servername - analysis - package update - server-esxi4.1 - 4.1_update03.zip
  Enter the user name: root
  Enter the password:
  Reports that apply to the but are not yet installed on the ESX host are listed.

  -Bulletin ID - summary-

  Hello

  Use this article to upgrade

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1002368&sliceId=1&docTypeID=DT_KB_1_1&dialogID=555350364&StateID=1%200%20555362320

  Concerning

  Mohammed

• Update - old Build number of the host

  Hello

  I tried to update two new hosts esxi (embedded) to the required version (381591), they are currently on version 348481. I used vSphere vcli on one and upgraded using vihostupdate.pl and on the other hand I tried to move the patch to a local depot and using esxupdate. The two seem to install properly and reported that the installation was a success and to restart, however, after rebooting the hosts, they have the old 348481 build number.

  I tried to reinstall, but told me that the patch is already installed. Any ideas?

  Thank you!

  Ciaran

  Why do you have patches of ESX applied if you use ESX (i)?

  Try to remove:

  UG-201101223- ESX410- 2011 - 08 - 05 T 12: 23:22 3w-9xxx: driver scsi for VMware ESX
  UG-201101224- ESX410- 2011 - 08 - 05 T 12: 23:22 vxge: driver for VMware ESX

  reboot a server and check the construction.