Update Firmware of WRT610N KILLED access to all computers in the MAC filter

Similar Questions

• How to allow access to all users of the connection on my computer?

  How to allow access to all users of the connection on my computer?

  Your question is hard to understand.  I interpret as:

  "How to allow all the users on my computer to access some files or folders?

  The answer depends somewhat on the question of whether you have XP Pro or XP Home, but a general answer is found the following article.

  "How to use file sharing Simple to share files in Windows XP"
    <>http://support.Microsoft.com/kb/304040 >

  Click on "level 3: files in shared documents available to local users"

  HTH,
  JW

• Client VPN prevents internet access from other computers on the network

  Hello.

  I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

  On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

  Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

  Thank you

  H. Adams

  Hello

  Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

  Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

  Vikas

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Create a scheduled task and deploy on all computers in the domain

  Hi all

  I have the following requirement:

  I need to automatically run a program of cleaning (Glary utilities) on all computers at a time as 10:30 on all computers in the domain. Also all by running the UAC program block and ask the admin domain password every time. I need only this program to be run as a domain user and run at the precise moment on all computers in the domain at a time. How can I do this? Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How an administrator can run a program on all computers on the network?

  Can I run an executable from an administrator account on all computers on the network?
  :)

  If computers were members of a domain, it would be possible to define a strategy broad area to run a program as a specific user on all the computer when you are connected. It would be a TI Pro number and you'd better post on MSDN or TechNet forums.

  When the computers are not on a domain each individual Director for computers are all separate accounts. Running a program on a computer as a user of another computer will be permissions issues.

• Access to all computers, Access Restriction stops

  I put the time of access restriction for my son (we have a wireless access for all systems).  I use MAC address on its systems. Xbox, Kindle Fire and his laptop.

  The MAC address are Correct. Here's the problem:

  I put the 'allow' and the time from 18:00 - 23:00 (all about the Christmas holidays) - the system works for awhile it is cut, as I'd like, but...

  After a period of time, the whole House goes online. I have to restart put it on router e2000, then disable access restrictions. System works then. Problem is reproducible. What is the problem. I've updated the firmware already. Otherwise, the system works very well. Never dies. Just at the moment where I set access restricions for awhile he kills houese entiore. BTW I can totally deny him 24/7 and the system idsables access very well. It's just when I put a specific time. I am very frustrated.

  Turning it off for an hour, did the trick. Don't know why, but its working now.  Thanks for the tip.

• Network map displays all computers in the company, but I can't access it.

  I just do a fresh install of Win7 Pro 64 bit on my computer here at the office.  When I'm in the file browser, I should be able to click on network and see all the computers in the corporate network.

  I used to be able to.  Now I have not.  I have the location set for work and I belong to the same workgroup as the rest.  I all file sharing and discovery enabled under Advanced setting options.  When I click on "View full map" from the network and sharing Center, I can see all the computers and get information when I hover. What did I miss?

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. is your computer connected to a domain network?
  2. what operating system is installed on other computers on the network? Is - Windows 7 or a previous version of Windows?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur either if your computer is not connected to a network or network discovery is disabled.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why can I not see other computers on my network?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  See also:
  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Can't access "Show all downloads" via the "library" Panel

  Top of page where you can click to see the progress of your downloads, there is the option «Show all downloads»

  When I click on 'Show all downloads', it shows me the 'library' with only one option. On the left hand side, I see the option named "all bookmarks". "However, has nothing else where he must also propose 'History,' Downloads ' and 'Tags' alongside"all bookmarks ". So, I can not access my downloads (of course, I can access my downloads through my account, but not what I am referring. I always prefer to verify via firefox, because it is much easier and faster).

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• How to deny access to all users except the administrator?

  Original title: need to deny access to everyone but me, administrator, The easier way?

  Been hacked! IM the administrator & need a way to block ALL HUMANS access to the content of my files. looking for a simpler, more efficient way!

  You must encrypt your files. Before you begin, be sure to follow these steps:

  • Fully familiarize yourself with the technique.
  • Encrypt a test file, back it up to an external medium, then pretend that your PC got stolen. Now try to decipher the saved the file.

  Remember - modern encryption schemes are the test of the crack. They do not distinguish between you and the owner and a pirate. They care only about the certificate or key.

• A matter of design about the update of a screen of classes different all in now the lock of the event.

  I have a screen:

  • A class that extends the screen

  I have three Classes that contain a call to a database that returns records of ~ 50 that I fill a ListField with. The ListField is added to a different Manager according to the class

  1. A class that contains a VerticalFieldManager
  2. A class that contains a HorizontalFieldManager
  3. Another class that contains a HorizontalFieldManager

  Once I complete the list and add what it the respective Manager, how can I add the Manager of one of the three classes of the class that extends the screen when I lock the event?

  Is it a bad design?

  There is a lot of code that will fill the lists, so I thought that using separate classes would be the way to go.

  I guess I can't understand how to add the handler to the class that extends the screen.

  If it is a bad design, which is a good approach?

  Yes, it should work. A couple of optimizations:

  (1) you don't have to check the isForeground() - even if your application is currently in the background, you want the user to see an update of the screen once it is implemented, not you?

  (2) you already have myScreen as the reference on the active screen - use instead of run this getActiveScreen() second time:

  myScreen.replace (oldVfm, value);

  I guess you can mark this as resolved issue.

• Have lost access to all folders except the Inbox, have tried unsuccessfully to repair?

  Impossible to find tools anywhere on the Inbox to add record change add on.

  To see the Menu bar press Alt or F10

• How do I export and distribute the setting; "Network.Automatic - ntlm - auth.trusted - uris" to all computers in the network (with active Rederiction file)?

  Hello

  We are about to activate SSO in our environment. Accordingly, I need to change the value of user_pref ("network.automatic - ntlm - auth.trusted - URIS", 'my domain'); > > prefs.js.

  I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file, it displays the prefs.js to the same location, not the Mozilla AppData folder. We are active with folder redirection Win7 environment. As a result, Mozilla. our users AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (the default random profile name). My question is what is the best course of action to add this file any PC user pref.js.? Keep in mind that the pref.js is located on the path to the hidden network that I have included above. I apologize if my question is not easy to understand.

  COR - el, I thank you once again for your help. I was able to use lockPref, set the value of, network.automatic - ntlm - auth.trusted - URIS.

  I'm all set.

• Show all messages on the Mac and iOs devices

  How can I synchronize MESSAGES in all my devices and my MAC desktop so that all messages are displayed on all devices?

  Make sure that you are connected with the same Apple ID on each device. That's all.

• Want to use ReadyNAS as a shared drive for all computers on the network, how do I do this?

  Nevermind - figured it out

  Hi Axulus,

  Welcome to the community!

  You can also consult these articles for reference.

  How to map a network drive (Windows XP, Vista, 7, 8, 10, Mac OS X)

  ReadyNAS with access using Windows Explorer

  To access the ReadyNAS using MAC OS X

  Kind regards

  BrianL
  NETGEAR community team