X200t and x201t: comparison

Similar Questions

• Capture and replay comparison report

  Hi all

  I have two environments and who are

  a. Database 10g standalone Windows.

  b. 11g Linux RAC database.

  I captured the burden of database 10g via API, transfer all files on server Linux 11 g and it was REPLAYED on instance RAC 11 g through OEM.

  Now, I want to capture and replay comparison report. I searched the Internet but found examples of capture and replay that were performed on the same server.

  So, how can I get the comparison of capture and replay report?

  If anyone knows that links then please share.

  Please suggest...

  Thank you and best regards,

  ANDY.

  Hey John,

  Thanks for the reply.

  I found my way.

  I imported the CWA source with "import_awr" and after that of OEM, I've had sex.

  Thank you and best regards,

  ANDY.

• Problem with LED and the comparison.

  Hi everyone, I have trouble with this application, so I hope that someone could give me some advice. Im going to explain as best I can...

  So in this VI, I have 4 signals that I need to compare them, I need the smallest and largest value, so I used a restructuring of business to do. I do 2 groups to be compared, and then the result of each one of them receives another comparison to get the values that I want. My problem is, for the largest value of all the 4, I need an LED to indicate what is most great, and something I have is in my attachment. I take my first group two and put 2 LEDs, so when the comparison occurs, you turn and the other goes OUT, (which indicates that one is the largest and the other is the smallest), and again the same thing in the other. But as you can see, when running I have two LEDs indicating, in every comparison, which is great, but I need a LED lights up when this value is present. and the other three offshore. I know that work in this way, the result I m going to get, but I can understand how to continue with the result of this step, I need.

  As far as I know, there is no way to compare more than 2 signals at the same time, so I tried to merge the signals, but this didn t help me at all (maybe is something that I do not understand how to merge works, so if anyone has an example on how to do things, i´ll check).

  All data are dynamic, a NI 9237, but since its a laboratory, I can't get a lot of time trying different solutions, so I did a test TDMS file and change the DAQ Assistant for a reading of file of the measure, but the rest is the same.

  Use 'antenna bundle' to build a picture of your values of 4 controls. Return the index of the max and min elements, use 'table max and min. From there on, it should be a wink to indicate the corresponding settings.

• at the level of the ILO AND by comparison

  Hello

  I discovered one - I think - strange behavior of my ICB 8.5.1 compiler and I wanted to ask your comments about it.

  Try this in the interactive execution window (it will result in a popup go as expected):

  #include
  public static unsigned short = 0 w x 8101;

  If (w & 0 x 1800) {MessagePopup ('fail', 'fail') ;}}
  else {MessagePopup ('pass', 'pass') ;}}

  Now, try this:

  #include
  public static unsigned short = 0 w x 8101;

  If (w & 0 x 1800! = 0) {MessagePopup ('fail', 'fail') ;}}
  else {MessagePopup ('pass', 'pass') ;}}

  It says do not? Well well, that happens to me.

  Cast 1800 x 0 or 0 to unsigned short does not work.

  I could only get the second excerpt only by changing the 0 x 0 8101 8100 w?

  How can the world the result of these two operations differ: (0 x 8101 & 0 x 1800); (0 x 8100 & 0 x 1800).

  Other pieces of 0 x 8101 compensation, incidentally, I mean change in 0 x 0101 or 0x8001 doesn't help either.

  The behavior is the same for 8.0.1 and 6.0 versions.

  Is it a problem of language C I'm not yet aware of the or a compiler "bug"?

  In C, operator ! = has a higher precedence than &, so the expression is evaluated as:

  w & (0 x 1800! = 0)

  What is true if x 8101 w = 0.

• Equal a comparison on DBL post in the range and force?

  Can I make and equal comparison between double when I use the upper or lower limit compared to the exit forced when the input value is not in the range? (Line and force function)

  I tried a little experiment with this idea and it seems to work very well, but... Although I like and respect Ben I really want to have to find a way to contribute a nickel to his pension fund.

  As far as I know, primitive equality simply compares the bits and since the antiderivative of coercion is officially (assuming that I understand the documentation) supposed to force up to the limit you specify, I guess this should always work (assuming you're really out of reach, of course). The question is what's the point?

• [Bug]? Line and force the comparison Mode

  It seems that changing the Mode of comparison of the IR & C function with the tables or Clusters attached does not Type of spread, or anything that is responsible for the selection of the instance.  By example, if I combine three tables at the entrances of IR & C, change the comparison mode for comparing aggregates, and then create an indicator of the range in? output, the result is the wrong indicator and a cut wire.  Similarly, can I change the mode on a function IR & C with a wired in the range? output and it will not break the thread until a subsequent change triggers a recompilation or type of spread.

  LV10 (no SP1) and Win7.

  Hi Darin.K,

  I was able to reproduce the behvior you see in LabVIEW 2010 SP1. If the tables are entered and the comparison Mode is the change in the creation of 'Compare the aggregates' indicator will incorrectly create an array of Boolean flags wired to a single Boolean result.

  This was previously reported in a request for Corrective Action (RCA) and the behavior has been corrected in LabVIEW 2011. Thank you for taking the time to report the problem and apologize for any inconvenience it caused.

• difference between VISA READ buffer and chain

  Hello I'm just starting to use the VISA read and write the function in labVIEW

  everyone knows what are the degree between reading VISA and the string buffer? and the comparison of the VISA Write buffer and chain

  Thank you

  Ein salvation,

  "read buffer" is the string given by VISAReadlabel, "write buffer" is the label of the string that is expected by VISAWrite!

  There is no difference...

• Identify and purge the duplicate files

  I'm running out of storage space. When I look at My Documents & Settings it seems that there is a lot of duplicates and files. Is there a process to identify duplicate files and purge them in Window XP?

  http://www.SnapFiles.com/reviews/AllDup/AllDup.html

  AllDup allows you to find the files duplicated on one or several folders or drives. You can choose to match files by size, date, attributes and content comparison byte by byte and also various settings to exclude certain file types or the search folders. AllDup then analyze selected records and produce a list of all files duplicate was found. The list is organized into groups, which makes it easy to manage results and process the files. You can manually select the files that you consider to be duplicates, or you can use the options of Intelligent selection that allows you to automatically select the files based on their date or folder. Duplicate files can be processed in different ways, you can choose to delete, move or copy them to a different folder or rename them in their current location. Other features include export search results, customized search profiles, a built-in file extract, ID3 tags support and more.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-duplicate-file-Finder/ausdupe.html

  Auslogics Duplicate File Finder helps you to find duplicate files that are likely to be scattered all over your hard drive. The program can compare files based on size, date, content and name. You can select several folders (with Sub-folders) or an entire drive to analyse, specify the methods used to determine the files double and then view the results list and delete files that you no longer need.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Suddenly can't access local users and groups permissions list

  In computer management (my computer / manage) "Local users and groups" icon has a red x on it and when I click on it I get this message:

  Local users and groups
  Unable to access the computer {computer name} toa. The error was: library not registered.

  How can I find which library is not registered, so I can register?

  BTW, this is one of several very similar problems that began to arrive after the last update of Microsoft Windows Vista.

  Hello GCCarvill,

  Thanks for posting your question in the Microsoft answers Forum.

  If you have a system restore point, before applying the updates would be the fastest way to restore the library file
  who is missing. Use the following article to restore to an earlier point in time. Don't forget to create a manual restore point before using an earlier version of the operating system.

  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  You can also create a manual system restore point so that you can restore in case of problems.
  How to create a system restore point manually:
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click the System Protection tab and then click on create.
  In the System Protection dialog box, type a description, and then click on create.

  After the search for the other forums, I found another user having a similar problem. They used a tool called FileMon and after comparison, they discovered a file called activeds.tlb was missing. They have restored a copy in the system32 directory and
  was then able to access the local users and groups successfully. You can download a copy of FileMon of:
  http://www.sysinternals.com

  If please reply back and let us know if it helped to solve your problem or if you need further assistance.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• problem Audio ban X200t with Windows 7

  I have two x200t with a Lenovo X 200 ban Dockingstation.

  With the x200t Vista Tablet installed Audio works perfekt.

  But I have trouble with the Installation of Windows 7.

  I'm not able to get the Audio Port ot the ban.

  I tried following this day:

  -reinstalled the Audio driver

  -trying to find a newer driver-> without success

  No idea how to get the Audio Port works with Windows 7 and ban?

  Thank you for our help so far.

  I downloaded the latest Vista driver for x 200/x200t and tried to install it. But the Installation fails mith an Error Message.

  So I did following:

  Start the Extraction of 6ea111ww.exe to C:/DRIVERS

  Right-click on computer-> properties, Device Manager, expand sound, video and controleur controller game, do a right click on the entry below-> update driver software, select 'Browse my computer for driver software', point to next:/DRIVERS-> C.

  If the driver Installation goes throght.

  Everything is now work perfektly.

• Connection 3G on Lenovo x200t

  Does anyone on this forum has Ericsson F3507G module 3G with Lenovo X200t and Windows 7 Ultimate edition on board? How do you configure you 3G connection?

  I have install Lenovo Mobile Broadband Connection Manager for Windows 7, it installed suceccsfully, I see it on Control Panel/Unnistall program.

  But where can I find it? I can't find any application with name like that!

  I'm going to "Set up a dial-up access", choose my 3G modem, in the 'Dial-up phone number' field set * 99 # and tap on connect, and I have the error message 768 or something, I don't remember. What I am doing wrong?

  I also have ubuntu on this laptop, and there, everything works perfectly.

  I'm confused

  Please help me

  That "Lenovo Mobile Broadband Connection Manager" you have installed? There is Lenovo Mobile Broadband Activation - unnecessary upplication for type UMTS and ThinkVantage Access Connections, the Manager of real networks. I hope that you have installed a 2nd.

  Do you think your modem associated with items in the Device Manager (I want to say NIC)?

  OK, first you must turn on the 3g radio using a combination of keys (Fn + F5 for example on my x 220). Look at keyboard or manual.

  Launch access connections, make the connection profile for connection 3 g, type APN for your carrier. In this case, you will not use modem but the NIC to wide band.

  But win 7 has a native support for connection mobile broadband. Watch the task bar, discover an icon with white bars, which open and discover your carrier network, right click mouse, options, profile, type AFN. To connect.

  The only weakness of the built-in Manager is unable to change the type of network, GPRS or 3 G, that type will be in automatic mode if you can only change by another tool. AC does.

• Bug: ViewObject programmatic and form Validation

  Hello
  
  I've set up a display object as described here: http://stackoverflow.com/a/14611815/59087
  
  Assigned to the view object is a shown here validation rule: http://i.imgur.com/HXiwPUL.png
  
  The StartDate attribute value must be a date equal to or earlier than the EndDate attribute.
  
  The view object is not supported by an entity. With the help of an entity here is not logically necessary as these input parameters are intended to be transmitted directly to a report. The parameters are independent of an entity and rather arbitrary.
  
  When a February 1, 2013 start date and an end date of February 28, 2013 are given, a validation rule error: http://i.imgur.com/8v4007w.png
  
  You can see how the view object has been created here: http://imgur.com/HQLNh5U, uqtt5Fq, X8fldVt, HXiwPUL, 8v4007w #0
  
  This was recorded as a SR with Oracle and received the following response, "I guess the question here is this place where you added the validation. If this is added to the attribute level, then he will be fired by updating the attributes and there is no guarantee of the order of the attributes updates. If this is not the right place for you to add validation dealing with several attributes of value. Ideally it should have been added as entity level validation in your OE. And if your VO is updatab; e, that he must have been supported by EO-it is British Colombia was designed.
  If EO the introduction is not possible now, maybe, you can try to replicate the validation at the attribute level and trigger the validation of the attribute last updated"
  
  I'm fairly certain that by selecting programmatic (http://i.imgur.com/HQLNh5U.png), this means that no entity is necessary for the view.
  
  In addition, given that the Rules of Validation tab appears (http://i.imgur.com/HXiwPUL.png), and a comparison rule can be defined, it leads me to believe that it is a bug.
  
  As a workaround, I can define an 'empty' entity that is not accompanied by a database object and performs an entity-level validation. I don't like this because it is a little more work and requires the implementation of a transitional 'ID' fake to uniquely identify the row.
  
  Other ideas (how can I enforce the order of updates of attributes so that StartDate is filled in the view before EndDate object, thereby ensuring that the validation is successful)?
  
  Published by: Dave.Jarvis on February 7, 2013 11:31

  Dave, support has a point here. Level of the attribute validation cannot cover the rules that have other attributes in the rule. In this case, you are detailed on the order of the attributes. The reason is that the validation of the attribute levels fires when the attribute changes its value. This is why the framework allows entity level validation (naturally only on an EO) where you can assume that all values are up to date and can be compared with each other.
  However, on a view levels validation object only transient attributes attribute is permitted. As is the validation of the attribute levels the same ruling applies as for EO. You should not compare two attributes of a levels of attribute validation rule as you cannot predict the order attributes and so you cannot predict the outcome of the rule.
  I do not see a bug here, such as validation to only at the level of the attribute.

  OK, what can you do?
  You can add an EO (as you said already) and add a level entity rule it. It will work, but needs some work more.
  You can remove the date field validation rules. MinValue and validate them in for example a bean or you can even use a method that is exposed in the client interface of your VO for this. Then, you call the method when the user clicks the button before you start the report. When the rule is triggered, you do not start the report, but the message.

  Timo

• Hash of CF and SQL Server

  
  Hello

  Basically, I receive a hash of a pk and would like to compare this hash value a pk in SQL Server.  It has no hash value that is stored in this table.  So I have to use CF function compare to compare the entire table while loop.  As a result, it's slow.  Y at - it functions in SQL server, or something that I can get a faster result of comparison?

  Here is essentially the loop of the table and the comparison.

  < name cfquery = "name" >

  SELECT id

  FROM tbl

  < / cfquery >

  < cfloop query = "name" >

  < cfset hashID = HASH (name.id, "SHA") >

  < cfif COMPARE(url.id,hashID) EQ 0 >

  [do something]

  < / cfif >

  < / cfloop >

  You certainly don't want the single quotes around the id, because who would literally be passing the 'id' string to the function.  You may need to wrap the id in a CAST statement to convert an int to a string.

  Then

  HASHBYTES ('SHA1', ID)

  would become

  HASHBYTES ('SHA1', CAST (id as varchar (10)))

  -Carl V.

• X200T - newbie (please help!)

  Hello world

  I just got a X200T and it's the first Tablet PC I had (formerly T400). I have two problems which I can't understand:

  Fingerprint reader:

  I can simply not my fingerprint reader to work. I've updated Client Security Solutions and the fingerprint reader to the latest version via the update system (actually my CSSolution is 8.20 Although I heard 8.21 is released, but the software update does not find it). Now that I've updated the software of the PC gives me an error message regarding an application DLL Gina when I start (and something similar when I closed). I tell him "use the original file instead" to get the computer to start. "

  I managed to saved all my fingerprints via fingerprint software, but I can not click on 'manage' software CCSolution to activate for what applications I want to use. The PC ask not me footprint either! Also, I went to the menu "Advanced" on CCSolution and allowed the "request for fingerprints during logon" without success. Any ideas?

  RAM / performance:

  Secondly, I was wondering if any of you think that it is worth to move to 4 GB of RAM. The computer is fast enough now, but I don't know it will slow down because of programs / apps that I use.

  Specifications of the PC:

  Inter Core Duo CPU L9400 @ 1.86 GHz

  3 GB Ram

  Windows XP Tablet PC Edition 05 (SP3)

  ANY HELP WOULD BE GREATLY APPRECIATED!

  Thomas

  Hi, this gina dll has to do with your security credentials.  the first thing is to go into the bios security and ensure that the fingerprint reader is enabled.  your biometric device appears in the devices?  probably, you get this error because you are trying to use client security without having first fingerprint reader enabled.

  as far as ram will I'm not sure that your chipset read more than 3 GB with a 32-bit operating system.  It could however. Search this forum, I remember seeing something, but I can't find it now.