Update for the advanced table query.

Similar Questions

• Update for the tree table problem

  Hello
  I use jdev tudio Edition Version 11.1.1.4.0
  I used the table tree to display my hirarchical data. I'm Bulding object for the purpose of list of floor.
  I created pojo data control. I am trying to drag and drop the level 1 of bulding1 on the bulding2 so it will be added to the bulding2. for that I packed a pojo addfloor() method and I add object floor in to list of floor of the bulding2 object. but the picture of the tree will not show the list update for bulding2.
  
  My question is how update the table of the tree so that it displays the data added to pojo on UI?
  
  I created the data from pojo under control
  package model;
  
  import java.util.ArrayList;
  import java.util.List;
  public class {Enterprise
  private list < Bulding > lstbuldingFor = new ArrayList < Bulding > ();
  Public Enterprise() {}
  Super();
  Bulding objbulding = new Bulding();
  objbulding.setBuldingName ("Bulding1");
  List < floor > lstfloor = new ArrayList < floor > ();
  Floor objfloor is new Floor();.
  objfloor.setFloorname ("Floor1");
  lstfloor. Add (objfloor);
  Floor objfloor2 is new Floor();.
  objfloor2.setFloorname ("Floor2");
  lstfloor. Add (objfloor2);
  objbulding.setLstfloor (lstfloor);
  lstbuldingFor.add (objbulding);
  Bulding objbulding2 = new Bulding();
  objbulding2.setBuldingName ("Bulding2");
  List < floor > lstfloor2 = new ArrayList < floor > ();
  Floor objfloor3 is new Floor();.
  objfloor3.setFloorname ("Floor3");
  lstfloor2. Add (objfloor3);
  Floor objfloor4 is new Floor();.
  objfloor4.setFloorname ("Floor4");
  lstfloor2. Add (objfloor4);
  objbulding2.setLstfloor (lstfloor2);
  lstbuldingFor.add (objbulding2);
  }
  
  {public adddFloor Sub (floor objfloor, String buldingName)
  
  System.out.println ("buldingName" + buldingName);
  System.out.println ("floor" + objfloor.getFloorname ());
  for (Bulding objBld:lstbuldingFor) {}
  
  {if (objBld.getBuldingName (.equalsIgnoreCase (buldingName)))}
  List < floor > objtempflr = new ArrayList < floor > ();
  System.out.println ("had correspondence");
  objtempflr = objBld.getLstfloor ();
  objtempflr. Add (objfloor);
  objBld.setLstfloor (objtempflr);
  break;
  }
  }
  
  getLstbuldingFor();
  }
  {} public void setLstbuldingFor (list < Bulding > lstbuldingFor)
  this.lstbuldingFor = lstbuldingFor;
  }
  
  public list < Bulding > getLstbuldingFor() {}
  for (Bulding objbld:lstbuldingFor) {}
  System.out.println ("@" + objbld.getBuldingName ());
  for (floor objflr:objbld.getLstfloor()) {}
  System.out.println ("@" + objflr.getFloorname ());
  }
  }
  Return lstbuldingFor;
  }
  }
  
  
  I'll call adddFloor() of the user interface to add the word to the bulding.

  Hello

  Make sure that you re - run the iterator that fills the tree. You make a change in the control of data, which is not immediately reflected in the link layer

  Frank

• Execution of statement of UPDATE for the whole table even when the WHERE Clause is presentation

  Hi friends,
  
  I have a problem in a stored procedure where I wrote an update with a where clause clause statement. At some point only one line should be updated according to the unique identifier in where clause.
  
  But what is happening is that the Update statement is getting executed for all rows in the table to neglect the WHERE clause. I don't get any idea of why this is happening. Here is the stored procedure and the update statement is BOLD:-
  
  CREATE OR REPLACE PROCEDURE MDMADM.proc_MDM_InsertCntryDetails
  (
  CntryMasterCode IN VARCHAR2,
  CntryName IN VARCHAR2,
  MDMUser IN VARCHAR2,
  Exists IN ITS ENTIRETY,
  status in VARCHAR2,
  Inserted_By IN VARCHAR2 default NULL,
  Modified_By IN VARCHAR2 default NULL,
  Mdm_Code IN the DEFAULT NUMBER 0.
  Action in VARCHAR2 DEFAULT 'Add ',.
  XGenAttNames IN VARCHAR2 default NULL,
  XGenAttValues IN VARCHAR2 default NULL,
  MirusAttNames IN VARCHAR2 default NULL,
  MirusAttValues IN VARCHAR2 default NULL,
  GenisysAttNames IN VARCHAR2 default NULL,
  GenisysAttValues IN VARCHAR2 default NULL,
  XGenModify IN VARCHAR2 default NULL,
  MirusModify IN VARCHAR2 default NULL,
  GenisysModify IN VARCHAR2 default NULL
  )
  
  IS
  
  strSQLXGen VARCHAR (1000);
  strSQLMirus VARCHAR (1000);
  strSQLGenisys VARCHAR (1000);
  nMaxMDMCode INTEGER.
  ifExist INTEGER;
  
  /******************************************************************************
  NAME: proc_MDM_InsertCntryDetails
  PURPOSE:
  
  REVISIONS:
  Worm Date Description of the author
  --------- ---------- --------------- ------------------------------------
  1.0 03/07/2009 1. Created this procedure.
  
  NOTES:
  
  Keywords to replace automatically available Auto:
  Object name: proc_MDM_InsertCntryDetails
  SYSDATE: 03/07/2009
  Date and time: 03/07/2009, 19:11:20 and 03/07/2009-19:11:20
  User name: (put in TOAD Options, editor of the procedure)
  Name of the table: (defined in the dialog box "New PL/SQL object")
  
  ******************************************************************************/
  BEGIN
  
  COUNT (*) of SELECT INTO ifExist OF MDM_COUNTRY_MASTER;
  
  IfExist IF = 0 THEN
  SELECT 1 INTO nMaxMDMCode FROM DUAL;
  ON THE OTHER
  SELECT MAX (MDM_CODE) + 1 IN MDM_COUNTRY_MASTER nMaxMDMCode;
  END IF;
  
  
  IF Action = "add" THEN
  
  INSERT INTO MDM_COUNTRY_MASTER(MDM_CODE,MDM_MASTER_CODE,MDM_DESCRIPTION,MDM_USER,MDM_EXIST,MDM_STATUS,MDM_ACTION,DAT_INSERT_DATE,DAT_INSERTED_BY)
  VALUES(nMaxMDMCode,CntryMasterCode,CntryName,MDMUser,exist,Status,action,sysdate,Inserted_By);
  
  strSQLXGen: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) XGenAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "XGen | '''' || ',1,' || XGenAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  strSQLMirus: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) MirusAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "Mirus | '''' || ',2,' || MirusAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  strSQLGenisys: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) GenisysAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "Genisys | '''' || ',3,' || GenisysAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  ON THE OTHER
  
  
  
  UPDATE MDM_COUNTRY_MASTER
  SET MDM_DESCRIPTION = CntryName, DAT_MODIFIED_BY = Modified_By, DAT_MODIFY_DATE = SYSDATE.
  MDM_USER = MDMUser, MDM_ACTION = Action, MDM_STATUS = status MDM_EXIST = exist WHERE MDM_CODE = Mdm_Code;
  
  
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 1 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLXGen: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) XGenAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "XGen | '''' || ',1,' || XGenAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  ON THE OTHER
  strSQLXGen: = "UPDATE MDM_COUNTRY_MAPPING SET | XGenModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 1';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  END IF;
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 2 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLMirus: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) MirusAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "Mirus | '''' || ',2,' || MirusAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  ON THE OTHER
  strSQLMirus: = "UPDATE MDM_COUNTRY_MAPPING SET | MirusModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 2';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  END IF;
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 3 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLGenisys: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) GenisysAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "Genisys | '''' || ',3,' || GenisysAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  ON THE OTHER
  strSQLGenisys: = "UPDATE MDM_COUNTRY_MAPPING SET | GenisysModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 3';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  END IF;
  
  
  
  END IF;
  
  
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  NULL;
  WHILE OTHERS THEN
  -Consider recording the error and then re-raise
  LIFT;
  END proc_MDM_InsertCntryDetails;
  /
  
  
  Thank you

  >
  WHERE mdm_code = mdm_code
  >

  This will always be value true - similar to WHERE 1 = 1.

  You typed it wrong or is the same as the variable column name? If they are the same test rename one of them.

• Updates for the 2007 Microsoft Office Suite (business)

  My updates of Windows there are two available, when important updates downloaded and installed, Windows Update tells some updates have not been installed.  Failed: 2 updates.  Code 80070641 Windows Update encountered an unknown error.  The Microsoft® 2007 Office Suite Service Pack 2 (SP2)

  Download size: 207.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Service Pack 2 provides the latest updates to the 2007 Microsoft Office Suite.  This update applies to Microsoft Office Project, Microsoft Office SharePoint Designer, Microsoft Expression Web, Microsoft Office Visio and Visual Web Developer.

  More information:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B444BF18-79EA-46C6-8A81-9DB49B4AB6E5&displaylang=en

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  and:

  Update for the junk e-mail in Outlook 2007 (KB968503) filter

  Download size: 3.3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  More information:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Now, I've exhausted my options here, can someone please inform me as to how I can solve this problem?  I respectfully request for a known solution, not what you think will solve the problem.  My OS is Vista Home Basic 32-bit.

  Thanks in advance to anyone who can solve this problem.

  Hi sallampat,

  Thanks for posting the Answers.Microsoft.Com Community Forum.

  I suggest start in a cleanboot, then try again your updates.  Download updates to a folder on your desktop, then start in a clean boot, then try the updates.

  We will follow the following steps

  1. start the CheckSur tool by - http://support.microsoft.com/kb/947821

  2. download the updates you referenced from this site: http://www.microsoft.com/downloads/details.aspx?familyid=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en and http://support.microsoft.com/kb/953195 download them and put them in a folder that you create on the desktop of your system.

  3. start your system by using the cleanboot procedure described below;

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. Click Start
     type msconfig in the Search box and press ENTER.

     If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. On the general tab, click Selective startup.
  3. Under Selective startup, clear the Load Startup items check box.
  4. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  5. Click OK.
  6. When you are prompted, click restart.
  7. After the computer starts, start the program or game and see if the problem is resolved.

  (Here is the article from the base of the boot process minimum - http://support.microsoft.com/kb/331796 - after troubleshooting is completed, use the steps listed in the knowledge base article to restore your system back to the normal mode).

  4. when your system is loaded into a clean boot - run an update at the same time in the folder that you downloaded on.

  After completing updates or to work on the updates that your system to a normal operating state, following the process of clean boot above, but turn on where to disable services were selected previously.  (The KB describes the entire process.)

  Please keep us informed on this issue if more information is required.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Request concerning the sequence of updates for the Windows Update client in 2015

  I posted a query similar to this on a Microsoft Technet forum, but I have not yet received a response to the specific question that I asked.  I'm trying so this forum.

  I am running Windows 7 Home Premium SP1, but I did not intend to accept the free update of Windows 10.  I don't use automatic updates.  I use Windows Update manually and select the updates to install, even for these updates identified as Important.

  Since April 2015, there was a sequence of updates for the client Windows Update on Windows 7 (Windows 8).  I have the Windows 7 of those below list:

  KB2990214 (April 2015)

  KB3050265 (June 2015)

  KB3065987 (July 2015)

  KB3075851 (August 2015)

  KB3083324 (September 2015)

  KB3083710 (October 2015)

  KB3102810 (November 2015)

  KB3112343 (December 2015)

  (This list is probably less intimidating than it looks because the replaced October update Update September, which replaced the August update, which replaced the July update, which replaced the June updated.  "There are therefore basically just 4 updates.)

  The big question is, given that Windows 7 is available for several years, why, all of a sudden, there was this sequence of updates for the Windows Update client?  Because these updates began to occur at the time when the offer of a free upgrade to Windows 10 was announced, I could be forgiven for thinking that all of these updates are really directed towards the relaxation of the upgrade to Windows 10 via Windows Update, and that there is little or no advantage to systems that are not upgrading.  I am mistaken in this belief?  If not, precisely those who will benefit from my system, even if it is not upgraded to Windows 10?

  The updates that I currently installed, depending on the installed updates, are KB2990214 (April 2015), KB3075851 (August 2015), KB3083324 (September 2015) and KB3083710 (October 2015).

  In my view, there was a lack of transparency in the descriptions of these updates in the KB articles.  And, in one or two cases, information on the importance of an update in the article and in Windows Update has been inconsistent.  It would have been much clearer if each KB article stated for NOT upgrading to Windows 10 systems, if the update to the Windows Update client is important, as an option or completely irrelevant.

  Hello, Tiberius.

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time and your concern.

  You can read this article and check if it helps.
  Next update to Microsoft Update Client
  http://blogs.technet.com/b/Mu/archive/2014/06/24/upcoming-update-for-Windows-Update-client.aspx

  Please keep us informed.

  Thank you

• Obligation to fill the values in table advanced according to the selection of a value in another article of lov (not in the advanced table)

  Hi all

  We work in a custom oaf page subdivision. We have an obligation to fill the values in table advanced based on a value selection in an element of the lov (this LOV is not in the advanced table) .can share you it please me steps or examples of code to achieve this. Waiting for response.

  Kind regards

  I do not understand completely still. What do you mean by "default in the table values must be inserted".

  You can create a dummy VO with the same columns and fix the VO in the advanced table.

  In the normal scenario, when the user clicks on submit button, browse this VO, and copy the values to the validation according to VO and appeal EO. If values gets inserted into the database.

  When the user selects the number of PO, simply run the other VO and fill this dummy VO so that values are available in the advanced table. When you click on send, do not copy these values to the EO based VO, so these lines won't get inserted.

  It work?

  See you soon

  AJ

• Enter the source id of lov at the advanced table bean

  Dear frends,

  I'm developing a customized page of the FPÖ. I have a chart of progress in that. lov 2 is there in the advanced table.

  I used a code to capture the event lov as shown below

  	If (PageContext.isLovEvent ())
  	{
  	String lovInputSourceId = pageContext.getParameter (SOURCE_PARAM);
  	pageContext.writeDiagnostics ("in the process form request source of real input id Lov",":"+ lovInputSourceId, 1 ");

  If ("OrganizationName". Equals (lovInputSourceId))

  {

  to do

  }

  If ("CustomerName".equals (lovInputSourceId))

  {

  to do

  }

  }

  But I get the id of source with the index as lov

  TableRN:OrganizationName:0

  TableRN:OrganizationName:2

  etc...

  How could I capture the source id of lov with respective index in advanced table?

  Kind regards

  Tarun

  Dear Sandeep,

  I tried to create dependent lov similar, so I got the answer for this...

  https://blogs.Oracle.com/prajkumar/entry/implement_dependent_lov_in_oa

  Kind regards

  Tarun

• view multiple lines in the advanced table

  Hi all
  
  I have a requirement. I created advancedtable. When the page loads, to display 4 rows at a time. Can anyone please help how to achieve this req
  
  Kind regards
  Murali

  Hello

  Write the code below in AM that will create 5 blank lines in the advanced table.

  xxVOImpl voImpl = getxxLineVO1();
  voImpl.setWhereClause ("1 = 2");
  voImpl.executeQuery ();
  for (int i = 1; i)<=5>
  {
  Line = voImpl.createRow ();
  voImpl.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  row.setAttribute ("column1", i);
  row.setAttribute ("column2", "XYZ");
  }

  Kind regards
  Mary

• Generate a number at the advanced table

  Hello world
  
  I have a table in my custom page which I already put in place. The additional functionality, I am adding now is to add a sequence of numbers in one of the table columns advanced so that whenever a row is added in the advanced table, the numbers should come from 1 number of lines added for this particular session.
  
  Sound essentially to count the number of lines, the user is adding every time in this advanced table.
  
  Any suggestions are appreciated.
  
  Thank you.

  You can create an attribute in the advanced table t. Also intiialize a value of TransactionTransient to 1. Whenever a row is added, you can set the mode attribute with the latest value of the TransactionValue and 1 and then increment the value of the Transaction.

  Hope that gives clues.

  Concerning
  Sumit

• Where can I find detailed, systematic support for the advanced Thunderbird related topics?

  In moving from XP to Windows 7, I opted for Thunderbird as a mail client in order to circumvent hyper intrusive Windows Live Mail to Microsoft (I used Outlook Express for years).

  I have a very complicated E-mail structure, and it took me weeks (seriously) to learn how to reproduce it in TBird. Now, I try to customize TBird more, but none of the TBird articles/forum Q & A / searches on Google to ask my questions.

  There is no support direct tech TBird, and I'm almost ready to leave for good. However - a last effort: where can I find detailed, systematic support for the advanced Thunderbird related topics?

  Thank you.

  https://www.flossmanuals.NET/Thunderbird/

• I don't get updates for the retina of my macbook pro 15 mid 2015 2.5 processors 16 g ram, last updated, I got was garage to April 8, may be there is no more updates at this time, but what made me think twice this app a player have updated when trigger

  I don't get updates for the retina of my macbook pro 15 mid 2015 2.5 processors 16 g ram, last updated, I got was garage to April 8, may be there is no more updates at this time, but what made me think twice as more than one reader app have update to search for the app store When news, nothing happened and onedrive will not be updated, and this dose of update does not appear in the section updates in the app store app

  any body can help?

  That's what I have in the last few weeks

  

  Make sure you have a good WiFi connection and are signed in iCloud / App Store

• Excite the situation of update for the AT10LE - A-&gt; Pro

  Hello

  I was wondering about the status of update for the Toshiba excited Pro.

  _Specifically: _

  -It's going to be an Android 4.3 or 4.4 update? After all, it's a tablet of the premium segment, and I expect the usual level of support. Another manufacturer usually release one or two updates.

  -is yet to come miracast? He promised during the liberation, but then he got the silent about it.

  -the problem of thermal regulation has finally been resolved? Again, this is not rocket science, other manufacturers seem to be able to produce pills that work without overheating.

  -It will never be a way to root it or unlock the bootloader?

  I'm sorry if this seems critical, but given the reviews I had read, I think that these issues are very relevant.

  Updates for both devices excite Pro 3 G and WiFi were released last week.

  Excite Pro AT10LE - A WiFi-> update V4.3.001120220.05
  Excite Pro 3G AT10LE - A-> update V4.3.201121220.35

• Qosmio G20 - how to find an update for the video card?

  Hi I can't find the update for the video card and when I run the game it hand me your video card drivers are too old.update them.
  my laptop:(toshiba Qosmio G20)
  My vidoe card: (NVIDIA GeForce Go 6600)
  Operating system: (Microsoft Windows XP Professional)

  Hey,.

  To be honest I don t understand your problem. Why visit nVidia?

  All you can download it from the download page of European driver from Toshiba as a boarder suggested. I even checked this and for Qosmio G20 and Windows XP you can get all the drivers no problem at all! :)

• A security update for the 2007 Microsoft Office System (KB976321) __Update to filter junk e-mail in Microsoft Office Outlook 2007 (KB981726)

  Update of security for Microsoft Office System 2007 (KB976321)
  Update for the junk e-mail in Outlook 2007 (KB981726) filter

  I have problems with the loading of these two updates on my computer.  Whenever I try, I get an "update failed" notice.

  These are the two only updates with that never got hurt.  I have a notebook hp compaq with Windows Vista.

  Flawed updates or am I doing something wrong or need to change a setting somewhere?

  Thank you, Bob

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Updates for the NET Framework 2.0 updates does settle

  I have been reminded of the updates for the Microsoft.NET Framework 2.0 SP2 server 2003 and Win XP x 86.

  Do not install the security updates.

  Flawless number only "don't not instaled.

  I checked with the different advise on services to update, but it won't help.

  Any help out there?

  John.

  From Internet Explorer

  Original title: updates will not be installed

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  more information: http://taurarian.mvps.org/Framework/Net_Framework.htm