Update from an another Apple ID...

Similar Questions

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• Podcast app is not updating from iTunes

  Podcast app is not updating from iTunes

  

  Saying "Podcast is available on IOS - only to get Podcasts search app store for your IOS device.

  I use 3 (new ipad, IOS 9.3.2) iPad and iTunes for windows 12.4.1.6

  How to solve it? Thank you

  Ignore the update, Podcasts is built into iOS 9, you can't update built-in apps on your iPad (except through iOS updates). (It's show due to: remove the built-in apps from the home screen on your device iOS with iOS beta 10 - Apple Support)

  If you have not all devices running older versions of iOS (or if you do, if you do not use Podcasts on them), you could remove the application from the My Apps from your iTunes library section so that the "update" to disappear.

• While the update requires a different apple id password

  Hello everyone,

  I have an iphone 4S. While you want to update an application such as: Google App or Sound Colud it comes up with a message: review needed-> press on continue and connect to see your billing or Cancel information-->--> continue Sign In to iTunes Store--> enter the password of your apple "[email protected]" which is not ID my apple ID and my backup email address is entered in the updated apple ID when I creatde my Apple ID: "*". My question is why come with this apple ID while I have set up as ' * ' in settings-> iTunes and App Store? and what would be the solution to update my applications?

  Thank you

  < Email published by host >

  The specific applications you are being prompted with another identifier Apple do it because when you copy of these applications were loaded on your iPhone, they had initially been bought under an another Apple ID. It does not matter what Apple ID you are currently using or have used. Apps are downloaded and attached to the ID that was charged to download. If you are not familiar with the ID in question, delete the app and download again. Doing so will load a copy of the application under your ID.

• "This device is already associated with one identifier Apple" "If you can also download past purchases with your Apple ID, you don't auto download or download past purchases with another Apple ID for 90 days.

  I had damaged my phone and Rec'd a refurbished Iphone s 5, Assurian, for an insurance claim.  (all transferred, but the phone was defective and returned and replaced with another refurbished iPhone 5 s) Yet once implemented with the help of AT & T Tech support Pro, everything goes fine until I realized that, although transferred to my iTunes library, when I went to play a song, I got the following message...

  "This device is already bound with one identifier Apple."

  "If you can also download past purchases with your Apple ID, you don't auto download or download past purchases with another Apple ID for 90 days.

  I've had several I phone and I have never encountered this problem. It gives me the option to cancel or transfer, however, I'm afraid of something disorder which could cause me to lose my purchased music or cause other problems... everyone has ever encountered this problem? or know what to do about it? Thank you

  You will not lose your purchases related to your Apple ID

  It seems that the device you have was not properly separated from its prior owner, before to be delivered to your

  Settings - iCloud - which is your current Apple you see there ID?

• Beta 5 of Firefox does not check the updates from an account without administrator privileges and won't ask administrator privileges apply downloaded update

  I can't get Firefox Beta 5 to check the updates using an account without administrator privileges. Beta version of Firefox 5 downloaded an update (from 2 Beta Beta 3), and now, there's a button apply update in the Firefox window that won't hurt, even though the update is properly applied from another account with administrator privileges.

  I use Windows 7 Professional 64-bit. In general, I use Firefox for an account without administrator privileges and provide the only administrator credentials when you are prompted to install or remove software.

  Delete the files in the folder updates\0 and updates.
  
  You may need to remove active - update.xml and updates.xml so, if it is present.

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

• Updates from HP agent... always began in the early and slows down computer

  HP Pavilion a1222n, Win XP Home

  When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

  I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

  Thank you

  Ron3033

  Hi Ron,

  Try the following.

  Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

  Kind regards

  DP - K

• When I try to download updates from the App Store, I asks me to enter my password;  However, the ID that is already stated on the box is that my wife is not mine.  When I try to change the ID I get quickly exceeded.  How can I change my username?

  I need to change the ID listed on the popup when I try to download updates from the App Store.  When I try to do as instructed, he repeatedly "expires me" in a few seconds.

  You must either update from his Apple ID or delete and re-download his Apple ID is stored inside of them.

  (138769)

• Auto update from 15/07/2011 today eliminated sound in my XP system... why?

  Auto update from 15/07/2011 today eliminated sound in my XP system... why?

  Another post wonderously useful by an MVP!

  Re-install your audio drivers, unfortunately happens from time to time. No one came up with an answer as to why, or at least I have not seen anything credible on this forum and its predecessor. It happens on some computers when installing XP sp3

  See you soon,.

  Jerry

• my dvd/cd drive and all other removable drives are more recognized since an update from microsoft

  I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can I fix it? I contacted Microsoft and back an email that I had to PAY for technical support to resolve this issue. Which seems hardly fair since there was an update on their part that messed up my laptop. I have a Gateway MX8738 with Vista Home Premium. I have not seen the error messages it just that there is no CD/DVD drive installed and when I check in my computer the only things that are displayed are the drives C and D.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
  course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
  as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• is it safe to update from windows 7 to windows 8 without having to worry about losing files and data of the current computer?

  will I lose my files and stored data when I update from windows 7 to windows 8?

  will I lose my files and stored data when I update from windows 7 to windows 8?

  There is no particular risk to lose anything, if you do an upgrade, rather than a new installation, and if you do it right.

  * However *, whenever make you a leap like an upgrade from one version of Windows to another, there is always a risk. Things * can * fool you. So before I do, you should be sure you have a current backup on external support of all important files for you.

  And another point. Even if you do not upgrade, it is * always * a risk of losing. So you should be sure you have a current backup on external support of all important files for you * all * time, not just in the moment it takes important steps.

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• Cannot import update - from - esxi4.1 - 4.1_update03.zip in the MUV 4.1.0 Update 3

  I have ten ESXI 4.1 Update 1 and 2 guests I want to spend to ESXI 4.1 Update 3. I upgraded 4.1.0 my server vCenter Update 3 (Build 799345) and VUM to 4.1.0 Update 3 (4.1.0.13360). I downloaded the upgrade file update - from - esxi4.1 - 4.1_update03.zip , but when I try to import from import a release upgrade, I get the error message:

  File name: update - from - esxi4.1 - 4.1_update03.zip

  Impossible to import data

  The downloaded update package is not a valid upgrade package

  Is it because it's an Update file and not a upgrade file (for example the-from-ESXi4.0-to-4.1.0-0.0.260247-release.zip upgrade)? If this is the case, nobody knows which file I would use; I can't find an another ESXi 4.1 U1/2 upgrade to ESXi 4.1 U3.

  There are two import options in the Update Manager. One for "Improvements" (e.g. version 4.0 to 4.1) and the other for "Updates" or patches. To import the patch bundle select 'Download of the Patch settings' in the 'Configuration' tab and click 'import of Patches.

  André

• Cannot download updates from 'new' Elements 9

  I bought Elements 9 off e - Bay as the cheapest option to open my Canon 60 d raw files. When I got there, I saw that someone he engraved on a standard DVD, so it's not OEM. He had a serial number on the back and installed fine, but when I tried to download updates, he told me there were errors of download. When I tried to register on my Adobe ID, he told me that the serial number was not valid. Fact I get ripped off with a copy of PE9 pirated, or is - this the result of how old it is and there is another way to get at least Camera Raw installed 6.5?

  See if the download of updates from there and then, by running the programs installation works:

  Windows

  Adobe Photoshop Elements: For Windows

  Mac

  Adobe Photoshop Elements: For Macintosh

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud