Update graphic XPS 410 map

Similar Questions

• Update the video card in Battlefield 3 for XPS 410?

  Hey all,.

  I have a question about upgrading the video card in my XPS 410.  I am currently using a nVidia GeForce 9500 GT video card, which has served me well for purposes of casual games.  However, I like to play Battlefield 3, but according to the nVidia website, this video card does not meet the minimum specifications.  So there is another card that I could update?  I am seriously thinking to buy a new PC in the fall, so I don't want to spend too much money on a new map (especially considering that my PC is long in the tooth that is).  In my view, that the XPS 410 has a 375W PSU, which also complicates things.

  Any suggestions?  nVidia or Radeon is fine.

  Thank you!

  Scott

  You would be a mistake.  Many have used the HD 6770 their Dell 375 Watt power supplies.  The HD 6770 would be a card game much better on the HD especially for BF3 6670.   You will use probably not much more than a total of 250 watts for your system in the game and even less if not.   The recommended minimum of card is the 8800 GT and HD 6670 is probably just equal to it.  However, the HD 6770 exceeds it so I think you'll be much happier.  Here's one that I would consider.  He has a $20 rebate.

• Dell Dimension 9200 (XPS 410) boot - dead?

  5-year warranty, but it is 5 y 11 months unfortunately >:)

  Data sheet: 2007 Dell Dimension 9200 (XPS 410 United States), Q6600 quad core, 4 GB RAM, 320 GB HD, Windows Vista, graphic of 8600GT 256 MB PCI-E x 16, tv PCI-E x 1 tuner card (do not), Dell LCD 22 monitor ".

  Brief history and prob: weird, early on, the hard drive must Access all seconds for a few years, never understand this. 2011 major problem does not start, fan on max, diagnostic light code that turned out be meaningless... surprisingly reinstallation of the graphics card has helped a bit and fact pc usable again... Mistakes became gradually less severe, it was weird. they tried to say it's a software problem, but this seems unlikely since the restore to factory condition (and the loss of some data) had not helped at all. Next years two ok. Two days ago it started not just and necessary a few reboots. Found this morning frozen on the black screen of Microsoft and had to hold power to turn off. (itself awoke to a windows update then died?) Tried to start, but it froze on the start of the BIOS set up screen, no keyboard no nothing and got the same old code "123" diagnosis, but even when there is no such code. Repeated several times. Tried reinstalling video card about 10 times, including the removal of tv card for its use of non - no and light code now diagnosis '34' are for failure possible extension of the map (not the graphics card... but there aren't any other card it must be the graphics card). No picture monitor at all now...

  Reference dell cruise forums seems to accuse 9200 motherboard...
  Can try to reset the CMOS jumper?

  I wish dell had corrected it when it was in warranty.

  Any ideas? I don't have another card PCI-E PC or graphics to cross check... worth buying another graphic card to try? You want to save pc if possible. Thank you.

  
  

• the dell xps 410 with windows media center 2005 makes it be able to run minecraft?

  I have the dell XPS 410 and I can't get it able to run mine craft due to a warning on my driver is possible to run it?

  You can probably run, but you will need to provide the specific error message, without paraphrase, as well as the following system information. For more detailed advice.

  I imagine that the warning suggests that you update the driver for your video card.

  The Minecraft system requirements: http://www.minecraftsystemrequirements.com/

  CanYouRunIt: http://www.systemrequirementslab.com/cyri

  Go here and enter your service tag to find the latest Dell driver--> http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  For more help here, provide your Information system specifications:

  Start > run > msinfo32.exe > OK
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer
  Click + next to 'Components', select 'View' then
  Edition > select all, then edit > copy
  Paste (CTRL + V) in your answer

• Del XPS 410

  The above PC has an LGA 775 motherboard E210882, my question is: on this Pc can install a Core 2 Duo processor? If so, can I move the Mem of Ram from 2 GB to 4 or 8 GB perhaps?

  It comes with an Intel® Viiv™ processor.

  The XPS 410 BIOS version 2.5.3 will recognize not all Core 2 Duo E6700 processors above and the max is the Core 2 Quad Q6700.  The BIOS update should be done BEFORE the CPU upgrade.

  8gigs may work but 2 gig DDR2 PC 6400 is hard to find and expensive.

  Here is what I have installed and its been working like a champ! 8GB

  http://www.Amazon.com/GP/product/B0027P9C9G

  Corsair TWIN2X4096-6400C5C 4 GB XMS2 PC2-6400 800 Mhz 240 pin memory dual channel DDR2 desktop

  Validated the list below.

  PR173 Presler P4 Kit, 915, 2. 8 g, 2 x 2 MB, FSB800, D0
  YW816 Kit of P4 Presler, 925, 3. 0 g, 2 x 2 MB, FSB800, D0
  XJ848 Presler P4 Kit, 930, 3. 0 g, 2 x 2 MB, FSB800, C1
  PU963 P4 Kit, 935 Presler, 3.2 G, 2 x 2 MB, FSB800, D0
  DK050 Presler P4 Kit, 940, 3.2 G, 2 x 2 MB, FSB800, C1
  JT962 Kit P4 Presler, 945, 3.4 G, 2 x 2 MB, FSB800, D0
  MY452 Presler P4 Kit, 950, 3.4 G, 2 x 2 MB, FSB800, D0

  DU363 Kit of Cedar Mill, 347, 3.06 G, 512 K, 533FSB, D0
  DU364 Kit of Cedar Mill, 352, 3.2 G, 512 K, 533FSB, D0
  FW685 Kit of Cedar Mill, 356, 3.33 G, 512 K, 533FSB, D0
  DK593 Cedar Mill Kit, 631, 3. 0 g, FSB800, 2 M, C1
  PN407 Cedar Mill Kit, 641, 3.2 G, 2 MB, FSB800, D0
  PY394 Cedar Mill Kit, 641, 3.2 G FSB800, 2 M, C1
  PY395 Cedar Mill Kit, 651, 3.4 G FSB800, 2 M, C1
  DK594 Cedar Mill Kit, 661, 3.6 G FSB800, 2 M, C1
  WM530 Cedar Mill Kit, 631, 3. 0 g, FSB800, 2 M, D0

  HU587 Conroe, E4300, 1 Kit. 8 g, 2 MB, FSB800, L2
  DX483 Kit of Conroe, E4400, 2.00 G, 2 MB, FSB800, L2
  DT893 Kit of Conroe E6300, 1.86 G 2 MB 1066FSB, B2
  DU362 Kit of Conroe E6300, 1.86 G, 2 MB L2, 1066FSB
  DX485 Kit Conroe, E6320, 1.86 G, 4 MB 1066FSB, B2
  DU361 Kit of Conroe, E6400, 2.13 G, 2 MB L2, 1066FSB
  KN977 Kit of Conroe, E6400, 2 MB, 1066FSB, B2 2.13 G
  DX484 Kit of Conroe E6420 2.13 G, 4 MB, 1066FSB, B2
  KU345 Kit Conroe E6600, 2. 4 g, 4 MB, 1066FSB, B2
  PN416 Kit of Conroe, E6700, 2. 66 g, 4 MB, 1066FSB, B2

  UY272 Kit of Smithfield, 805, 2 P4. 66 g, 2 x 1 MB, 533FSB, B0
  FG941 Kit of Smithfield, 820, 2 P4. 8 g, FSB800, 2 MB, Mainstream, B0

  RP356 Kit of Celeron Prescott, 336, 2. 8 g, 533FSB, 256 K, G1
  RP358 Kit Celeron Prescott, 346, 3.06 G, 533FSB, 256 K, G1
  RP359 Prescott Celeron Kit, 351, 3.2 G, 533FSB, 256 K, G1
  UT713 Kit of P4 Prescott, 531, 3. 0 g, FSB800, 1 MB, G1
  UT714 Kit Prescott P4, 541, 3.2 G, FSB800, 1 MB, G1
  UY274 Kit P4 Prescott, 524, 3.06 G, 1 MB, 533FSB, G1

• XPS 410 processor upgrade

  Hello

  I have a XPS 410 aging which I've recently updated with an ATI 6870 and a larger rated PSU from 600 watts.

  I also want to upgrade the CPU but found on this socket 775 on this machine is limited to CPU rated at 1066.

  A series of E7600 would work on this?  or am I limited to a Q6600 or E6800? my current cpu is the 6420, I see a difference?

  Thanks a lot for helping me to see what the limits are.

  franckler

  The XPS410/9200 supports 65nm processors, the E7600 is a 45nm processor and is not supported.

  You can find a list of compatible processors for the XPS 410 in a post by Chris M HERE

  Before installing the processor, you must upgrade the BIOS with the latest version, 2.5.3, because with version 2.5.1 new CPU Support has been added.

  Note: The Core 2 Quad Q6700, is not listed but is compatible.

  Bev.

• My trusty DELL XPS 410

  Need a little help. My trusty XPS 410, bought in 2007, the hard drive is dead. So I try with a new hard drive upgrade from Vista x 32 for Win 7 x 64. I'm not a novice to the upgrades of the computer and new buildings, but it's really left me speechless.

  With the replacement of the hard disk installed (not new), 250GB. I can get the Windows 7 installation disc to read, but once I start the format/install process. It starts the process and "freezes", towers of circles but nothing happens, for a few hours... then finally I get an error that Windows could not complete the format install process.

  I updated the BIOS and tried another hard drive, with the same result. Funny, Vista will reinstall without problem. This is a generation of pretty generic factory, with no real upgrade. I don't have the money to buy a new PC.

  I am posting this work, I'll get more information from her tonight. and after another message tomorrow. Thanks for any help.

  You boot from the Windows 7 installation disc? Windows 7 x 64 should be quite compatible with the XPS 410. The installation disc is maybe bad?

• Dell XPS 410 memory capacity

  Hello

  I have a XPS 410 aging badly need of an overhaul.  It is a great machine that I have maintained quite well for the past nine years.  Currently, it has 3 GB of RAM installed (1 x 2 GB and 512 MB x 2), but I wanted to start with the RAM upgrade.

  The motherboard has been replaced 2 years ago, and the person who repaired told me that it would be useful to simply upgrade of components if I have the skill.  When it was sold in 2005/2006 he says he has a maximum capacity of 4 GB RAM, but I've seen many posts (which are a few years, btw) it could contain 8 GB (4x2Go RAM modules.  I was wondering if it can be improved to 12 GB (4 x 2 + 2 x 2) or even 16 GB also (4 x 4 GB).  I guess it comes down to, you can install a 4 GB RAM module? or is too high to 2 GB?

  Intend to do a small upgrade RAM, adding SSD or readers, another small upgrade RAM, replacement of processors and perhaps eventually adding a map interface SATA if it would be beneficial.  In the end, the only original thing to this device would be the card reader, network card and the case!  Thank you for any advice you can give me.

  You can not go to 16 gig.  8 GB is possible but only with compatible non buffered non ecc non registered Ram of LOW density.   DDR2 is dead or missing since the retail channel.  If you get a Precision T3500 opportunity that uses DDR3, you're more likely to keep it for a few years.  The max ram is the same precision 380 or XPS400.  You have 4 slots, 4 x 2 gig is possible as well as 4 x 1 gig.  You can find a T3400 precision with 4 GB or more of ram is the same as the cost of 8 GB of ram only.

  http://www.eBay.com/Sch/i.html?_nkw=Dell+T3400

• Update graphics card on Qosmo F50

  Hey, I have a laptop Qosmio F50 - 10 k... can I upgrade my graphics card so I can play newer games?

  Hello

  In General, update graphics on laptops is not possible.
  More info on what you can read in follow Toshiba document > http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Equium P300-16 t and update graphic card

  Hi all.

  I was thinking about upgrading my graphics on the computer laptop satellite P300-16 t. I have not opened yet so my question is, has anyone here opened this machine? If so, is there a way to install a dedicated graphics card? i.e. the pcie? Could someone please advise if there are institutions in the machine to upgrade my graphics?

  My gratitude in advance for any help.

  In General, update graphics card is not supported and cannot be done.
  Toshiba has written about it in http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  A common problem with portable mobile is the heat and to built the effective cooling system. Each laptop has optimized cooling system. More powerful graphics card will produce more heat, and this balanced hardware platform will not properly work. Can result in permanent damage from overheating or material.

  Maybe stupid comment now, but if you need more powerful your laptop sell on eBay and buy a new one.

• Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

  Hello!

  I have several lenovos windows 7 with this update

  Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

  I'm trying to fix it with the original driver?

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

  all the solutions out there?

  THX

  Peter

  You can download the driver from the Intel website (search on your model number of graph, then Windows 7), read the notes first check it is correct for your hardware, uninstall the graphics drivers (Windows will return to a default basic driver), restart and install the new drivers.

  If this does not work, the Lenovo Web site will be older (but certified to work) drivers for your system model.

• allocate space by updating graphic

  Hey all,.

  I was wondering if there is a way to update graphic while allowing space for the table so that it will be more efficient calculation.

  the method I always used was build in a time / loop and an array of generation that concatenates and have a graph set inside the loop. It seems to be slugging my computer because it takes a long time for labview open other programs later.

  My question is, is it possible to allocate space AND have the graphic update each time? I know that I can initialize an array and replace the elements in the table, but then my chart is filled with zeros. any help is appreciated. Thanks in advance!

  If you initialize your array with NaN instead of 0, you will not have visible padding in your chart.

  You can also watch to see if a chart fits your needs better than a graph.  Graphics built in buffers and display the most recent values for x.  You can change the size of the buffer.

• Pavilion G7-1150us: No. update graphics drivers...

  I can't find updated graphic drrivers to date anywhere. Where can I find the updated graphics drivers? I have an Intel graphics card, and I have tried (almost) everything.

  Sorry, but HP is only provide drivers for Windows 7 on this model. Windows update should offer a driver for Intel HD integrated graphics card on your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Initialization with NaN effects update graphic

  Hello

  Interesting find, thought I share. It would be interesting to know a difficulty that I have tried!

  I've initialized a table with 240 000 elements using NaN. Simply, I used "Replaced Array" fuction to replace the individual item and built graphic Group XY XY. It all works but!

  Interestingly, the entire vi could slow down until every element of the NaN is replaced. Once all the elements are replaced, the appellant vi would update the UI as usual.

  If I replace NaNs with 0 in the initialization stage, then there is no problems of speed and performance. However, I get horizontal lines to 0 for all channels, which is the reason why I use NaNs to avoid this false representation of signals.

  Is this a known issue with NaNs and the fix for that?

  Thank you very much

  Waris K

  Last year, I noticed a similar slowdown with updates graphics if NaNs are involved. (discussed elsewhere, not public).

  Under certain conditions, NaN causes slowdowns in 32-bit programs. I wonder if 64-bit LabVIEW show the same problem?

  Also read the section "impact on performance on the x 87 FPU" at this link.

• I'm trying to update my Garmin GPS maps. I get a message saying "outdated Plugins.

  I'm trying to update my Garmin GPS maps. "I get a message saying'outdated Plugins ' when I click on the plan to update on the web site of mygarmin.com ?

  No one knows why this happens? I've updated my maps at least 2 more times without problem.

  original title: oudated plugins

  I'm trying to update my Garmin GPS maps. "I get a message saying'outdated Plugins ' when I click on the plan to update on the web site of mygarmin.com ?

  No one knows why this happens? I've updated my maps at least 2 more times without problem.

  Contact Garmin.

  Try another browser too.