I'm trying to update my Garmin GPS maps. I get a message saying "outdated Plugins.

Similar Questions

• I tried to update my windows Explorer, but I get a message saying "Service Pack is not supported". When I try the link to get an update, it fails.

  My e-mail link has a s aying of message that the system is no longer supported with a link to get an update. When I try the link, I get a message saying "Service Pack is not supported" with a link to get an update. When I try the link, it fails.

  Hello

  1 did you change on your computer before this problem?

  2. update you are trying to install?

  3 are. what email link you referring?

  4. you receive an error message?

  Follow the suggestions and see if it helps.

  Method 1

  Run the system update readiness tool, and then check.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I tried to close my Hotmail account but I get a message saying there are services paid on the account and I'm unable to close.

  original title: close my hotmail account

  I tried to close my hotmail account and I get a message saying cannot close because one or more paid services or a microsoft points account is linked to your account.

  How will I know that a microsoft points account or paid services account?

  Hi Tataiana,

  Looks like you may have a service subscription on your real account configuration.
  Please go to http://billing.microsoft.com, connect and check your services and to cancel what you don't want. Then try to close the Hotmail account once more.
  Let us know if you need additional assistance.

• When I try to update programs on my computer, I get a message saying a program in windows install can not start what I do?

  When I try to update or install new programs, I get a message saying that a program in windows install icannot open or does not work and I can't complete installation. I am running windows xp with all service packs and updates.

  Hello

  You did changes to the computer before this problem?

  Always after return the exact error message. This could help us help you better.

  Read the following article that may help you.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I just formatted my computer and I went to be updated and used to leave I get a message saying problems with the web site

  How do i update my computer if he returns constantly with this economics of site there is a problem it is an ode to mistake we continue to last nite

  0x8024400a I use it please anyone advise.  If I go to the new UPDATE ON THE PAGE qY I AGREEMENT of AGREEMENT NOTHING is HAPPENING AS I DO I hae family xp for windows

  Ty very much. That's what was wrong my friend he Tea on my p and improved to served 3 and was able to update ty much

• While installation of win put updated to xp home edition, I get a message saying INF install failure. incorrect parameter

  I install win xp home edition upgrade. about 3/4 of the way through the installation, I get a message saying... Installation INF. incorrect setting failure. This computer is holding still to install xp. is anyway to solve this problem. I have to do a fresh install? Please help me. Thank you.

  Hi BigNik13,

  It seems that the installation disc has been damaged, you can replace the drive and can still use the same product key.

  Hope this information helps.

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  Hi Heather,

  You can follow the thread: creative cloud update - error code: 3 where this problem is already discussed and resolved.

  You can also follow article: error "Unable to install" received when installing Adobe Creative Cloud desktop application that will help you solve the problem.

  Thank you

  Yann Arora

• Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one.

  Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.

  Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...

  Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.

  So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.

  The difficulty of this Apple.

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• Tried to turn off my computer and it froze. Now, the desktop does not load and I get a message saying that Windows Explorer is not responding

  Original title: virus Possible?

  I am running Windows Vista Home Premium on a Toshiba laptop. The last time I tried to stop it, it froze (got as far as the last screen showing 'close', then didn't). The next time I turned it on the desktop would not load completely (white screen, no desktop icons, accesses start bar) and if I click on the desktop I get a message saying "Windows Explorer is unresponsive. I tried to scan antivirus, but that also froze. I ran Microsoft defender several times, and it always freezes on C:\windows\system32\cmd.exe. While I can access internet Explorer, I can't click on the links that would open a new page (gel once more). Finally I can't yet do a reboot or a full stop. If it's a virus, how can I solve the problem when no anti-virus software is running?

  Any help would be greatly appreciated! I just moved across the world and have little knowledge of computers (but I'm much less following the instructions!). The last thing I need is for my laptop to be drunk so I can't communicate with the House...

  Hello

  Since you have had that protection antivirus in the next message will be methods to
  carefully check for malware.

  TrendMicro must be uninstalled and replaced<- this="" is="" a="" must="" do!="" if="" you="" have="">
  problems to check with TrendMicro.

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  =======================================

  Do not type the sfcdetails command, copy and paste.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =================================================================

  Did you do checks memory and updated the BIOS, chipset of low level drivers and major
  embedded and separate device drivers?

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After an update has failed (service Pack2) I get a message "windows is not genuine".

  Hello

  My laptop has been inactive for a few weeks and when I started I had many updates to install...

  I am running Windows Vista professional. After a (apparently unsuccessful) update with service pack 2, I get a message that my Windows is not genuine!

  • When I try to enter my key product per computer > properties etc. I get a message: "the product key you entered will not work with this edition of Windows Vista.» You must run the Windows Vista Setup program or enter a Windows Vista Business product key." But the key that I entered is for Vista Business!
  • I also tried to download the service pack and run it again, but it never ends. Same thing happens with another microsoft product making so-called system updates... They both end up never after many hours.
  • Do here, unfortunately, none created system restore point so I can't go back...

  Other possible solutions? I have a lot of programs installed there and I don't want to reinstall windows from the restore CD. In addition, I do not know if it would work since I have the product key appears to be invalid for any reason any...

  Thanks in advance

  I don't know what the problem is to post your report in the forums - especially since you are clearly able to download also.

  The problem seems OK - a corrupt license store.

  Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.

  You may need to enter your COA key and activate it.
  Once complete, run another report MGADiag and post back with the results

• I have Quicktime 7, but when I try to open iTunes I get a message saying that I need to update Quicktime 7.5.5. How to do this?

  I have Quicktime 7, but when I try to open iTunes I get a message saying that I need to update Quicktime 7.5.5. How to do this?

  Click here to install or run the software update from the system preferences panel.

  (143939)

• I have upgrated to El Capitan OS.  Unfortunately, I lost iPhoto in the process.  When I try to update iPhoto on iTunes I get a message saying that the iPhoto update is only available in the United States (!)  How can I get this app from Canada -

  How to upgrade to iPhoto on an IMac (El Capitan, OS).  Tried to find it on iTunes but I get a message, it is not available in the Canada.

  What version do you have now? You can use iPhoto 11 v9.6.1 on El Capitan. If you have a version earlier than iPhoto 11 then there is no way to upgrade and you must use the new Photos.app instead.

  If you have a version of iPhoto 11 then put it in the trash (not empty it) and reinstall it from the shopping list of the Mac App Store - note it is the Mac App Store and nothing to do with iTUnes.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.