"Update info" link does not work in Windows 8 by using the Microsoft account

Similar Questions

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Scroll function does not work on Mac if you use the mouse. To scroll, the only way is by using the arrow keys.

  I can also click, hold and drag the scroll to the top and bottom bar.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• After July 2014 update Vista, correcting spelling does not work on Windows Mail from 2006.

  Original title: Vista update of July 2014

  After July 2014 Vista Update orthographic corrector does not work on Windows Mail from 2006. Click on the "Edit" button to correct a GIS spelled the word, the screen goes gray and stop Mail.  Uninstall Vista Security Updates (5 discount) on July 8 and the Explorer 9 Cumulative security update solves the problem. (Prove with this reinstallation and uninstallation twice)  Have not yet had time to verify that updates 6 is the cause of the problem.

  Updated Vista regularly since it was first released.  First time I met this specific problem.

  Would be grateful for any comments or advice.

  I have this to happen on occasion and fix it tool.
   
   
  Try to compact and repair the database with this tool.
  
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
   
   

• eGames Solitaire Master does not work with Windows 7

  Original title; Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  Tried master eGames Solitaire, this does not work with windows 7. When will Microsoft a compatabillaty mode that actually works. If this is not the case, stop advertising as such. Its time Microsoft was made responsible for the costs involved in the duty of the latest edition of the software because of their own mess.

  Then you may need to try the modes of virtualization I listed above depending on the version of Windows 7, you have installed. However, XP Mode was created mainly for commercial applications and not for games so graphics intense games may not work correctly even in XP Mode.

  You can check with the manufacturer to see if they have an update or a fix that will allow the game to be run on Windows 7. Since the site egames solitaire Master 3 or 4 Master Solitär does not show to be compatible with Windows 7. However, they show to be compatible with Windows Vista.

  It is the manufacturer of games to make their games compatible with the operating system back.

  Hope this will help.

  Marilyn

• Speech recognition does not work in Windows 7

  Original title: Windows 7 and speech recognition

  I try to use speech recognition (Microsoft) on Windows 7. Whenever I have try and use it after a few seconds it stops working. I looked on the Microsoft website for updates or tips on the memory required etc. Any suggestions? I have the latest service pack applied. I have 2 GB of memory should I more?

  Thank you
  Anne

  Hi Anne,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Speech recognition does not work in Windows 7.

  The problem may occur if the microphone is not close enough to the voice or the microphone input is too low.

  Do you get any error messages?

  To check if the problem is for the above reasons, I suggest to visit:

  Why the computer does not understand my voice commands?

  http://Windows.Microsoft.com/en-in/Windows7/why-doesn

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Re: where download update BIOS - toshiba link does not work!

  Where to download the latest version of the BIOS for U500 PSU5EE?
  On the toshiba page link does not work!

  I need the latest BIOS because I installed Windows 7 64-bit and sometimes I get BSOD and selfrestarts - event ID 41 63 task category - PC, and I discovered that there is possible problem in CPU that is not fully 64 - bit compatible and update of the BIOS might help solve this problem.

  When I click to download the link, it shows me: 404 - Not Found.

  In my view, there is a temporary server problem. Wait a few moments and try again. Sometimes it happens

• Satellite A660 BIOS update link does not work

  Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
  Unfortunately, the link does not work.

  I hope someone reads this part of the administration of technical assistance.

  Hello

  For PSAW3E:
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

  Run as admin.

• My Windows 8 Expertzone download link does not work

  Download link does not work

  Hello

  I finished Windows 8 Associate level training through Microsoft Expertzone and I received a free copy of windows 8, but the download link does not work any help please?
  Thank you

  Hello Fadi Estevan,

  This is not the right site for questions about Microsoft ExpertZone.
  Contact them at the * address email is removed from the privacy *

  If you are not in the United States, go to the link here ExpertZone and enter your country.
  Then go to the bottom of the page "contact us".

  I hope this helps.

  Marilyn

• Hi, I have acrobat adobe 6.0, but it does not work on windows 7, y at - it an available update?

  Hi, I have acrobat adobe 6.0, but it does not work on windows 7, y at - it an available update?

  To be more precise, it is not a question of Acrobat 6, having not been tested under Windows 7. We know that it does not work due to changes in the operating system architecture. The first version of Acrobat to all compatible with Windows 7 is Acrobat 8.1 (an update to Acrobat 8). The latest version of Acrobat (and the only one currently available for licenses) is Acrobat 11.

  -Dov

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af