Update of a column of table from xml data

Hello

I have an obligation to update a particular table from xml data column. to do this, I wrote the code below but I am not able to insert. could you please a peek into that.

create table emp3
as
select *From emp
where 1=1;

alter table emp3
add (fax_response varchar2(50));

/*create sequence EmailRecords_XMLFILE_SEQ
  minvalue 1
  maxvalue 999999999999999999999999999
  start with 1
  increment by 1
  nocache;*/

/* create global temporary table EmailRecords_XMLFILE
  (
  ID NUMBER not null,
  xmlfile CLOB
  )
  on commit preserve rows;*/

/* create global temporary table UPD_Email_Records_With_Xml
  (
  id NUMBER not null,

  response VARCHAR2(500)

  )
  on commit preserve rows; */

the XML data is

<FAX>
<EMAILOG>
<ID>7839</ID>
<RESPONSE>FAX SENT</RESPONSE>
</EMAILOG>
<EMAILOG>
<ID>7566</ID>
<RESPONSE>FAX NOT SENT</RESPONSE>
</EMAILOG>
</FAX>

CREATE OR REPLACE PROCEDURE proc_upd_email_records (
   loc_xml          IN       CLOB,
   p_err_code_out   OUT      NUMBER,
   p_err_mesg_out   OUT      VARCHAR2
)
IS
   loc_id   NUMBER;
BEGIN
   loc_id := emailrecords_xmlfile_seq.NEXTVAL; --created sequence



   INSERT INTO emailrecords_xmlfile --created Global Temp table
               (ID, xmlfile
               )
        VALUES (loc_id, loc_xml
               );

   COMMIT;
      insert into UPD_Email_Records_With_Xml --created Global Temp table
        (ID, RESPONSE)
        select x1.id,

                  x1.RESPONSE
          from EmailRecords_XMLFILE,
               xmltable('/FAX/EMAILOGID' passing
                        xmltype.createxml(EmailRecords_XMLFILE.xmlfile)
                        columns header_no for ordinality,
                        id number path 'ID',
                        RESPONSE VARCHAR2(250) path 'RESPONSE'

                           ) x1
         where EmailRecords_XMLFILE.id = loc_id;
   COMMIT;

   UPDATE emp3 er
      SET er.fax_response = (SELECT response
                           FROM upd_email_records_with_xml pr
                          WHERE pr.ID = er.empno)
    WHERE er.empno IN (SELECT ID
                         FROM upd_email_records_with_xml);
EXCEPTION
   WHEN NO_DATA_FOUND
   THEN
      raise_application_error
         (-20000,
          'Sorry ! The Xml File which is passed is empty. Please try with Valid Xml File. Thank you!!! '
         );
   WHEN OTHERS
   THEN
      p_err_code_out := 4;
      p_err_mesg_out := 'error in insertion=> ' || SQLERRM;
END proc_upd_email_records;
{code}{code}

Someone suggest me a slightly easier way to insert data...

Thank you...

You're complicating things

A simple MERGE statement will do.

create or replace procedure (proc_upd_email_records)

loc_xml in clob

)

is

Start

merge into e emp3

a_l'_aide_de)

Select id

response

from xmltable)

"/ FAX/EMAILOG.

by the way xmlparse (document loc_xml)

the columns id number way "ID".

, path of varchar2 (250) response 'RESPONSE '.

)

) v

on (e.empno = v.id)

When matched then update

Set e.fax_response = v.response

;

end;

/

But there is no value added by using these temporary tables if you are not at least an intermediate XMLType column (storage preferably binary XML).

-What is the input XML code?

-What is the version of db?

Tags: Database

Similar Questions

to retrieve data from xml data type

Hello...
I have a doubt in the oracle database... Here's how to retrieve data from xml data type?

Like this...

SQL> ed
Wrote file afiedt.buf

  1  with t as (select xmltype('
  2  
  3    
  4      toMonth5
  5      ctTestPan1
  6      costType2
  7      toYear2012
  8      fromMonth12
  9      fromYear2011
 10    
 11  ') as xml from dual)
 12  --
 13  -- end of sample XMLDATA, use below query on your own table etc. as required
 14  --
 15  select x.*
 16  from   t
 17        ,xmltable('/DETAILS/FIELDS_VALUES/FIELD'
 18                  passing t.xml
 19                  columns name varchar2(30) path './NAME'
 20                         ,val  varchar2(10) path './VALUE'
 21*                ) x
SQL> /

NAME                           VAL
------------------------------ ----------
toMonth                        5
ctTestPan                      1
costType                       2
toYear                         2012
fromMonth                      12
fromYear                       2011

6 rows selected.

navigateToURL from XML data
(Edited for clarity 13:16's)

OK thanks to Greg, I have this with a redirect built in barchart:

This is my simple histogram:

< mx:BarChart = x "561" y = "198" id = "CapitalExpenditures" dataProvider = "{I}" width = "762" showDataTips = "True" fontSize = "12" height = "371" >
< mx:verticalAxis >
"< mx:CategoryAxis categoryField="@type "/ >
< / mx:verticalAxis >
< mx:series >
"< displayName = 'Spending' xField="@balance mx:BarSeries ' fill = race "{sc1}" = "{s1}" labelFunction = "formatNumber.
Click = "navigateToURL (new URLRequest (rptWebsite))" >
< / mx:BarSeries >
< / mx:series >
< / mx:BarChart >

It works very well, but rather than hard code the URL, I would like to get from XML data that are already loaded into the system and assigned to a XMLList "di". My XML file is structured as follows:

<>projects
"< prName work = hours of 'One-project' = '705.50' rptUrl = ' http://www.google.com" / > "
"< prName work = hours of project 'B' = '370.00' rptUrl = ' http://www.yahoo.com" / > "
< / project >

What I want to do, use the URL of the XML file, under the name of rptUrl as the URL path in my re - direct.

I tried to put everything in navigateToURL (new URLRequest (@rptUrl) "> in but could not compile.")

My confusion is the place where to insert the value in the URL variable and precisely what syntax to use? I have to use e4X for example?

I created this function to my redirection:

public void goUrlTFP(event:MouseEvent):void
{
' rptWebsite =' http://www.google.com "
navigateToURL (new URLRequest (rptWebsite)) return
}

It compiles, but I get nothing in the variable.

I'm using the wrong syntax? I have to do something other than a mouseEvent of my function? Should I trigger the function somewhere else to the click event? I have to browse the file and fill a XMLList or something?

I tried rptWebsite=item.@rptUrl and rptWebsite=ceDs.@rptUrl, but those who could not compile

M.
M, without trying to sound like I'm raggine on you (yet), I'm curious to know how you go about detective your way through the API to come up with possible solutions. What is your thought process? I wonder if it wouldn't you get more if you provide some tips on how to use the API correctly. Teach you to fish instead of giving the fish (for setting the proverb a little).

I certainly did not know the answer to your problem just a few minutes ago, but it's literally what it took me to find what I think can be an answer to your problem.

You have defined your features such as:
Click on a bar chart and have it redirect to a URL that does not exist in the dataProvider of the histogram.

How can we get these data to URL? The first thing to check would be click events. We look at the possible events that can be shipped when clicking the chart element (BarSeries) or component BarChart himself. When you look at the 'click' for the two event I wasn't expecting much in the measure where this event carrying additional information that I might be able to use, it's just a simple click event. And if I did event.currentTarget, there is no property that directly gives me the data I'm looking. However, in the API, I see an event type itemClick ChartItemEvent (under events) for BarChart which seems promising.

Then I look in the API to ChartItemEvent and note that there is a property "hitData" type HitData which seem also promising. Now I look at HitData in the API and see that there is a property "item. It's more likely that the element that is used to render the particular BarSeries I clicked on. So I think that I can easily get the related data on an itemClick event.

I tried and it was of course the data that I expect. I can remember something painfully obvious and much simpler to obtain these data, but I think this thought process shows that with a little effort, you can get a few runs in the API that you will probably have your solution. I doubt there is anyone on this forum who knows everything there is to know about the API. Use the docs, they are your friend.

BTW, what is the other language that you are more familiar with what you're talking about from time to time?

TS

How update the relational table with XML data?

I get XML messages that include a bunch of data items to be updated in a table. An arbitrary subset of rows is updated for each message received.

The output of the following example is correct, but the use of the intermediate table that bothers me. The temporary table can be eliminated somehow? Or is the most reasonable way to loop just explicitly and parse the XML message and then update each row separately?

I'm under 11.2.0.1.0.

create table otn9test (
  id number not null primary key,
  data xmltype
);

insert into otn9test values (1, xmltype('<data>default for 1</data>'));
insert into otn9test values (2, xmltype('<data>default for 2</data>'));
insert into otn9test values (3, xmltype('<data>default for 3</data>'));

create table otn9input (
  id number,
  data xmltype
);

column data format a30

declare
  updata constant xmltype := xmltype('<root>
  <item>
    <id>1</id>
    <data>Id 1 updated.</data>
  </item>
  <item>
    <id>3</id>
    <data>Id 3 updated.</data>
  </item>
  <item>
    <id>4</id>
    <data>Id 4 updated.</data>
  </item>
</root>');

begin
  insert into otn9input
    select * from
    xmltable('/root/item' passing updata
          columns
          id number path 'id',
          data xmltype path 'data');

  update otn9test t set data = (
    select data from otn9input i
    where t.id = i.id
  ) where t.id in (select id from otn9input);

  commit;
end;
/

select * from otn9input;

/*
     ID DATA
---------- ------------------------------
      1 <data>Id 1 updated.</data>
      3 <data>Id 3 updated.</data>
      4 <data>Id 4 updated.</data>
*/

select * from otn9test;

/*
     ID DATA
---------- ------------------------------
      1 <data>Id 1 updated.</data>
      2 <data>default for 2</data>
      3 <data>Id 3 updated.</data>
*/

drop table otn9input;
drop table otn9test;

The temporary table can be eliminated somehow?

You can do it with the MERGER:

merge into otn9test t
using (
  select id, data
  from xmltable('/root/item' passing updata
        columns
          id   number  path 'id',
          data xmltype path 'data'
       )
) x
on ( t.id = x.id )
when matched then update
 set t.data = x.data
;

However, if you are looking for performance on large data sets, I think that the best is to use an intermediate table of XMLType (binary storage) to maintain the XML instance.

create table otn9input of xmltype
xmltype store as securefile binary xml;

insert into otn9input values(
xmltype('
  
    1
    Id 1 updated.
  
  
    3
    Id 3 updated.
  
  
    4
    Id 4 updated.
  
')
);

merge into otn9test t
using (
select id, data
from otn9input,
     xmltable('/root/item' passing object_value
          columns
            id number path 'id',
            data xmltype path 'data'
     )
) x
on ( t.id = x.id )
when matched then update
 set t.data = x.data
;

A structured XMLIndex could also help.

Update the values in the Table from another Table containing historical data

So, I have two tables, a table and a master table. The current table is updated each week and at the end of the week, is copied to the main table to keep historical data. I have update the table in progress early in the week and want to take the latest data from the master table and update the current table with the data. The current table could have additional IDs or some of the IDS could have deposited (these lines would receive data in the main table). I want to only update the rows in the current table that have existing data to the attr1, attr2, attr3 columns. A particular ID may have more than one record in the primary table, I want only the last disk to use for updating the current table. The data from a different database where no direct connection is possible then I have to import data every week. Here are some statements of create/insert:
```
create table current_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
```
```
create table Master_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
```
```
begin
insert into current_T (ID1,adate)
values ('IE111','08/02/13');
insert into current_T (ID1,adate)
values ('IE112','08/02/13');
insert into current_T (ID1,adate)
values ('IE113','08/02/13');

insert into master_T (ID1,adate,attr1,attr2,attr3)
values ('IE111','08/01/13','yes','abc','123');
insert into master_T (ID1,adate,attr1,attr2,attr3)
values ('IE112','08/01/13','no','dgf','951');
insert into master_T (ID1,adate,attr1,attr2,attr3)
values ('IE113','08/01/13','no','dgf','951');
insert into master_T (ID1,adate,attr1,attr2,attr3)
values ('IE113','07/01/13','no','dgf','951');
end;
```
This has been a scratcher for me head and any help would be greatly appreciated. I'm coding in Apex 4.1
Thank you
-Steve

Not tested

merge into current_t c

using (select *)

Of

(select m.*

row_number() over (partition by m.id1 m.adate DESC order) rn

of master_t m

)

where rn = 1

) u

on (c.id1 = u.id1)

When matched then update

Set c.adate = u.adate

c.attr1 = u.attr1,

c.attr2 = u.attr2,

c.attr3 = u.attr3,

When not matched then insert

(c.id1, c.adate, c.attr1, c.attr2, c.attr3)

values

(u.id1, u.adate, u.attr1, u.attr2, u.attr3)

;

Can I create an XSD from XML data into a CLOB?

Environment:

Oracle 11.2.0.3 EE on Solaris.

Highly an XML newbie so please be nice!
I spent the past few days pouring through the documentation and various articles, including this one, but... I need help.
I am trying to extract XML data stored in a CLOB and produce a flat file for the user's consumption.
They sent me what they think is the XSD for XML data, but when I look at the data in the CLOB I don't see tags in the XSD.
I would like to produce a XSD based on real data to compare with what they sent.
Is this possible?
I am able to query XML data using the tags that I see in data using XMLTable and it works fine.
Any help is greatly appreciated.
-gary

Welcome to the side of the world, where you're going to love it and curse, like any other piece of XML technology.

So if I understand correctly, the scope of your operation is to extract information from an XML file and then write this information to the disk, correct?

A few questions

-Why did the XML stored in a CLOB instead of an XMLType column? Without knowing the history of the system, it is a pertinent question.

-What size are the XML? I ask this question, it is because when the XML is stored in the columns of XMLType (relational structure object or XML BINARY SECUREFILE format), then Oracle can parse the XML much more easily when it is stored as a CLOB. If the XML is small enough, you can see no difference in performance between the two.

The Oracle DB itself has no built in the ability to generate a schema from an XML file. To do this, you need to use a third-party tool that has this feature in. For example, XML Spy can do. Other tools as well, but that's what comes to mind first is what I use. The only thing to remember is that the scheme he built is only an XML instance. Other XML instances can be different and not valid against the schema you generated, but still valid against the original schema unknown.

You can save the schema in the database and then use the XML to create an XMLType instance related to the schema and then validate the XML in this way. An example XML DB FAQ and here's another one Re: validation of XML schema

Hope that helps you continue.

New table from existing data source
Hi all

M using Essbase Studio to generate the cube (Hyperion 11.1.2)... I imported a few tables in a data source. Later it is possible to import a new table in the data source?

Kind regards
Lolita
Yes is was possible in all versions to add a table/view to a data source, just right click on the data source and select incremental update. 11.1.2 you can also remove or update the sources of existing data with new and changed columns.

Creating sub XMLList Collection from XML data

Hello
I use three TileList components - A, B and C
Get the data as a single XML from a remote XML data function through a component generator HTTPService
for example: simple XML data:
nodes <>
< node id = "1" type = "a" > < / node >
< node id = "2" type = "b" > < / node >
< = '3' type = 'c' node id > < / node >
< node id = "4" type = "b" > < / node >
< = '5' type = 'c' node id > < / node >
< node id = "6" type = "a" > < / node >
< node id = "7" type = "a" > < / node >
< / node >
I would like to create (group based on the XML attribute ' type') 3 sub list XML collection / XMLs using the received XML (see above) to propose it as a data provider for the three TileList component matching
as:
1 XMLA as a data provider for A tileList
nodes <>
< node id = "1" type = "a" > < / node >
< node id = "6" type = "a" > < / node >
< node id = "7" type = "a" > < / node >
< / node >
2 XMLB as data provider for B-tileList
nodes <>
< node id = "2" type = "b" > < / node >
< node id = "4" type = "b" > < / node >
< / node >
3 XMLC as data provider for C-tileList
nodes <>
< = '3' type = 'c' node id > < / node >
< = '5' type = 'c' node id > < / node >
< / node >
How can I accomplish this?
-Sen

This can be done very concise, with the help of E4X, which allows you to work with XML from child's play.

Here is my example which binds the data provider to all nodes of the type 'a' and that specifies the field of the label of the control set to the id attribute of the node:

http://www.Adobe.com/2006/mxml">

Data from table in XML data type

Hi friends,

I have data of type table, and I want that in XML to send through the web service.

could you please suggest any api available in Oracle 11 g (PLSQL) for this or any method to produce.

Help, please.

Kind regards

Tom

For example, if MY_FUNCTION() returns a MAJOR_LINE_TABLE_TYPE collection type, you can do something like this:

Select xmlserialize (document

XmlElement ("ROOT"

xmlagg (xmltype (t.object_value))

)

dash

) as a result

table (my_function ()) t;

It will generate a canonical XML document right out of the returned collection:

If this requires a minimum of effort, the drawback is that you don't have much control over the generated structure.

Optionally, apply an XSLT stylesheet to transform into the required shape.

The other option is to turn back the hierarchy of objects to relational data and use the SQL/XML functions to generate the XML content.

If you use these objects only in order to generate the XML, then you can also bypass it entirely and build the XML directly in the base tables, it will be much more effective.

Is it possible to update a styleClass in a table from a Bean?

How are Hello everyone, you today?
I use JDeveloper 12.1.2.0.0.
In my function onDimCoinSelect(SelectionEvent selectionEvent) I get the lines that I have to choose, put a styleClass for my table and for each other tables, I'm going to get the lines to highlight another style.
So in my first choice, I will select one or more pieces of my parts table (which I have the color with the color green) and the data associated with this selection (for example, the products of the table) will get a few lines of color in one color (white for related data) and other gray color (for data that is not related).
So, something like this happens:
(table of coins), selects: euro and dolar-> green color, not select: pound, etc.-> gray
(products table), data related (for example, product a, b and c)-> color white, unbound (for example, product d, e and f)-> gray
It works pretty well, but if now restrict my search for one product (say A product) must change now the styleClass my other style and color made it with green and others with the gray wire, since I chose only one.
My problem here is updating the table itself to detect that I've changed the styleClass.
I tried to add: AdfFacesContext.getCurrentInstance () .addPartialTarget (dimProduct);
But if I add to this, I can not select the data with Shift-click for multiple selections.
Is there another way to update the table to detect changes of styleClass?

The best way to achieve this is the help that you are an EL Expression. This El Expression can use variables or functions in your bean method, but the decision of the style is decided in the Expression of the El in the styleClass property.

Here is an example:

styleClass = 'AFStretchWidth; #{(ControlBean.inicial == 'true')? "style-1': (ControlBean.coin == 'false')? "style-4': ' {style-0'}"

The table in XML data
Dear Sir

The current ver is 10gXe

I trf suite data through two table the Pl/sql procedure in table sales, filed (col) narr varchar2 (200)

How can I select all in xml?

is it possible to convert given below even even in Formate of xml

> < 1 INVOICE NUMBER < / INVOICE NUMBER >
< DATE 14/09/2011 invoice - > < / DATE of INVOICE >
< BILLING - >
Pipe of the first < DESCRIPTION OF PRODUCTS > carbon steel seamless < / PRODUCT >
CETSH < NUMBER > 73049000 < / CETSH-NUMBER >
QUANTITY < CODE > KG < / QUANTITY-CODE >
< QUANTITY > 40 < / QUANTITY >
< AMOUNT-OF-DUTY-set GAME > 3699 < / QUANTITY-OF-DUTY-INCURRED >
< / BILLING >
< / INVOICE-INSTRUCTIONS >
You must use the getClobVal() method to convert the XMLType to a character data type:
```
...
).extract('/*').getclobval() as yourXML
from demo_orders o;
```

Unable to update the payload by managed program from Bean data
Hello

BPM 11.1.1.5 + Extensions Pack features, Feature Pack, JDeveloper 11.1.1.5 model: ADF BC

How to access the BPM 11 g load useful or process varibles in the workflow of ADF
The task of reading by program details

I followed the 2 wires above to read the value according to the payload data.
So I'm able to read existing values according to the payload data.

Managed code of bean to get the current payload data (copied from the links above) - tried the call of setOperation and invokeOperation
SerializableAttribute public class MyBean extends InvokeActionBean
{
public String setOperation (ActionEvent actionEvent)
{
FacesContext context = FacesContext.getCurrentInstance ();
String tskId = (String) context.getApplication () .evaluateExpressionGet (context, "#{pageFlowScope.bpmWorklistTaskId}", String.class);
IWorkflowServiceClient workflowSvcClient = (WorkflowServiceClientFactory.REMOTE_CLIENT) WorkflowServiceClientFactory.getWorkflowServiceClient;
ITaskService taskSvc = workflowSvcClient. getTaskService().
ITaskQueryService wfQueryService = workflowSvcClient.getTaskQueryService ();
IWorkflowContext wfContext = WorklistUtil.getWorkflowContextForASelectedTask ();
Task myTask = wfQueryService.getTaskDetailsById (wfContext, tskId);
Element payloadElem = myTask.getPayloadAsElement ();
NodeList payloadNodeList = payloadElem.getElementsByTagName (("MyApproval"));
Node fstnode = payloadNodeList.item (0);
Element fstElmnt = fstnode (element);
NodeList tstNmElmntLst = fstElmnt.getElementsByTagName ("approvalRequired"); getting node approvalRequired
Element tstNmElmnt = tstNmElmntLst.item (0) (element);
_logger.severe ("node Value:" + tstNmElmnt. getNodeValue() "');
...
the above newspaper printed the existing value correctly in newspapers

So far so good.

But my requirement is to update the payload data before sending it to the next task.
These payload data process will decide which path to choose (exclusive gateway).

So I tried to update the following payload data.

tstNmElmnt.setNodeValue ("yes"); (actually it comes to dynamic value returned from a java method)
Return super.setOperation (actionEvent);
}

The statement above doesn't seem to work.
There was no exception as well.
I checked the data payload of the Oracle Enterprise Manager of verification of process instance console, but it doesn't seem to affect the new value ("yes")

Can someone check and let me know if I missed something?

Thanks for any help.
Concerning
Sameer
Next post helped me.
Assign the role, the Group initiated human when task

We need to call the following method to update the data payload instead of setNodeValue

tstNmElmnt.setTextContent ("yes");
myTask.setPayloadAsElement (payloadElem);
taskSvc.updateTask (wfContext, myTask);

Thanks and greetings
Sameer

JS/CS4: Create references from XML-Data

Hi scripters.
My problem is the following:
I am importing and scripts of a XML file in InDesign.
Now I would like to Insert a reference (notes) in my text.
The insertion point is after the element < endnotesign >, the endnotetext itself is located at the end of the document (and is also numbered).
When manually editing the document I chose-> "Insert reference" and then bind it with 'paragraph' then I choose a special definition "endnotestyle", it contained all the paragraphs, I now link the first one and inserting 'paragraph number' (which comes from the numbering of the "endnotestyle"). I have to do after each < endnotesign > element
Is there a way to automate this?
I am a bit confused with the IndesignObjects in ESTK as there are references and hyperlinks that are mixed together in this content.
Thank you in advance for your help!
This is my first fragmentary essay:
function processEndnotes() {}
myIdName = "processEndnotes";
This.XPath = "//endnotesign."
This.Apply = function (myElement, myRuleProcessor) {}
var myInsertionPoint = myElement.insertionPoints [0];
mySource var = myDocument.hyperlinkTextSources.add (myInsertionPoint);
How to set the destination in this case?
var xRefForm = doc.crossReferenceFormats.item ("page nr.");

source var = myDocument.crossReferenceSources.add (myInsertionPoint, xRefForm);
myLink var = myDocument.hyperlinks.add (source, destination);
myLink.visible = false;
Returns true;
}
}

Hey franziska.

Here is an example of the way in which in script using cross references end notes:

http://www.kahrel.plus.com/InDesign/dynamic_endnotes.html

Peter

Select this OPTION to generate XML data from the table using XMLELEMENT, XMLAGG gives error ORA-19011 string buffer too small

My select statement fails with the error:

The ORA-19011 string buffer too small

The select statement looks like:

SELECT TO_CLOB)
XMLELEMENT ("accounts",
XMLELEMENT ("count",
XMLATTRIBUTES)
rownum AS "recordId."
To_date('20130520','YYYYMMDD') AS "datestarted."
123456 AS "previousBatchId."
56789 AS 'previousRecordId '.
),
....
.... .
.....
XMLFOREST)
SIG_ROLE AS "SignatoryRole."
To_char(TRANSFER_DATE,'YYYY-mm-DD') AS "TransferDate."
NVL(Reason,0) AS 'reason '.
) AS the 'transfer '.
)
()) AS CRDTRPT
OF ANY_TABLE;
- It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)
I'd use the XMLGEN package. But the environment team says no mounted drives in the future with the arrival of the EXADATA.
NO HARD DRIVE MOUNTED, NO ACCESS TO THE DATABASE DIRECTORIES
No UTL_FILE
I need to use the REEL spool the resulting XML data of the SELECT query.
SQL is a standard in my org, but I can do with a PL/SQL solution also to load data into a table (cannot use a COIL with PL/SQL)
What I do is:
1. a column of type CLOB to a xml_report of the loading of the above SELECT query table
2. Then using SELECT * FROM xml_report to SPOOL the data to a file report.xml
No need of XMLTYPE data behind. Xml data stream is fine for me.
In addition, I need to validate the XML file, also using XSD.
Problem is that the resulting lines of the select query are supposed to be from 15000 to 20000 bytes long.
Oracle database version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
A Suggestion or a solution to this problem would be appreciated.
(Sorry for the use of "BOLD", just to make it more readable and highlight the imp points)
Bravo!
Rahul

It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

You use the right method.

There is an implicit conversion from XMLType to the data type VARCHAR2 as expected by the function TO_CLOB, where the limitation, and the error.

To serialize XMLType to CLOB, use the XMLSerialize function:

SELECT XMLSerialize (DOCUMENT

XMLELEMENT ("accounts",

...

)

)

OF ANY_TABLE;

For the rest of the requirement, I wish you good luck trying to spool the XML correctly.

You may need to play around with the SET LONG and SET LONGCHUNKSIZE commands to operate.

Insert XML data from the Table-> back to null
Dear Experts,

-I have table xml as below:

Example of CREATE TABLE (XML_spec XMLTYPE);

Insert in the example
Select ' < name of Message = "dataStaticInvestor" type = "IncomingMessage" >
< name of field = "batchReference" > OPENINGBATCH000000 < / field > < List name = "data" >
< = record name "data" >
< name of field = "externalReference" > 01234567890aaaaaaa < / field >
< name of field = "participantID" > OD001 < / field >
< name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
< / recording >
< = record name "data" >
< name of field = "externalReference" > 01234567890aaaaaaa < / field >
< name of field = "participantID" > OD001 < / field >
< name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
< / recording >
< = record name "data" >
< name of field = "externalReference" > 01234567890aaaaaaa < / field >
< name of field = "participantID" > OD001 < / field >
< name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
< / recording >
< / list >
< / message > ' double.

Select * example;

create table hasil1 (c1 varchar2 (500), c2 varchar2 (500), c3 varchar2 (500));

-This step I create the procedure to insert xml data into the table as the batch.

DECLARE
x XmlType;
BEGIN
Select XML_SPEC in x for example;

insert into hasil1
SELECT
p.Extract('/Record/Field/@externalReference').getstringval (C1),
p.Extract('/Record/Field/@participantID').getstringval (C2),
p.Extract('/Record/Field/@participantName').getstringval () as c3
TABLE (XMLSequence (Extract(x,'Message/List/Record'))) p;
commit;
END;
/

-when the result of select hasil1, the output is back 3 rows and 3 columns, but all data is a null *.

Best regards
Sigcle
You don't explain what output you need, but I guess something like this:
```
SQL> insert into hasil1 (c1, c2, c3)
  2  select x.c1, x.c2, x.c3
  3  from example t
  4     , xmltable(
  5         'Message/List/Record'
  6         passing t.xml_spec
  7         columns c1 varchar2(500) path 'Field[@name="externalReference"]'
  8               , c2 varchar2(500) path 'Field[@name="participantID"]'
  9               , c3 varchar2(500) path 'Field[@name="participantName"]'
 10       ) x
 11  ;

3 rows inserted

SQL> select * from hasil1;

C1                     C2        C3
---------------------- --------- --------------------------------
01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
 
```

Update of a column of table from xml data

Similar Questions

Maybe you are looking for