Update of connectivity for 10G VIC Cisco NAC 1225 Options

Similar Questions

• Have Windows XP... Asking me to update Flash Player for videos but there is no option of XP

  All of a sudden without vids will play... I watch that version is not safe and I need to update... All update options for Windows 7, 8 and others, but no option for Flash for the XP system... Seems "allowing", I can get around...

  Two updated versions are currently:

  • 18.0.0.194
  • 13.0.0.296

  If you cannot install 18.x, then you would need to use the Adobe uninstaller program to remove 17.x. otherwise, Setup for 13.x will always tell you the superior version already.

  It has a link to uninstaller in our article of support here: Flash Plugin - keep up-to-date and solve problems.

• Cisco NAC Agent Login screen

  There is a problem that is coming with the customers, sometimes on some of the connection start screen customer Cisco NAC Agent is not displayed on the login screen for some of the newly added machines. Are there special requirements for cisco Agent on the client machines.

  Concerning

  Waqas

  Waqas,

  No specific requirement, except that they be on the list of the OS supported. For example server OSs don't are not so supported if you were trying to install/run on a Server 2003 or 2008, which will not work.

  HTH,

  Faisal

• delivery of mail with 5510 e error - print. updates and connection are ok. a friend has the same problem.

  I checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and everything is good.  But I still have the error of mail delivery when e-printing.  And my friend has the same problem with his new b111a 5510.  What could be the problem?  Regular, printing, scanning, and so on work fine with my wireless connection.

  So looks like it's maybe a problem with the E-mail address provided by your internet provider, you send from,

  What I would say as a test is to create an email account with g mail and or yahoo and try to send the e-mail to your eprint/E-mail account and see if it accepts the email too, make sure you have your printer the value Accept e-mail for all users, you can do so by logging into Eprint Center and then enter these parameters and select this option

• Cisco NAC appliance - after a success does not change users to connect to the vlan propper

  Hello

  I am new to cisco NAC BURNERS and I have to troubleshoot an implementation. It is a real OOB IP gateway configuration. Users can connect to the Pentecost the CCA, but after the connection of this success, they remain on the role not authenticated, as well as on this vlan. I checked the SNMP protocol and seems to work very well. Also, I checked the logs on nac_manager.log and there is nothing surprising, in fact I see nothing about this user or IP address that connects.

  Also the user does not appear on the list of users online on cam.

  Can someone help me figure out how can I fix? version 4.8, I'll post any information requested

  Thank you

  We recently had the problem with Windows AD SSO and Windows 7 clients.

  Would authenticate the XP clients very well, however, Windows 7 clients would not authenticate and will remain just on the authenticated vlan.

  Our question was looking for CASE SSO account, we installed on AD. It only support the encryption, WHICH has no Windows 7 64. We turned off "Use OF THE encryption" on the account authentication UNIQUE AD and re-tested.

  What are the parameters of the port-profile to which is applied the switchport?

  What is the map settings vlan ports trunk not approved or confidence?

• Attempt to update 21.0 loops connecting"for updating the server." How should I do?

  «I'm in Firefox 20.0.1 on a 660 s Dell Windows 7 Home Premium.» I downloaded and installed Firefox in May. I can't take it to 21,0 for the following reason:

  "Update available" window for Firefox 21.0 opens every day. I click on update Firefox and "Download Firefox" window opens with the notification 'connection to update server... '. ». It continues to run, sometimes for hours (when I forgot about this) but it ends. I finally cancel and it happens overnight.

  Make sure that your Antivirus is blocking the download

  Disable your Antivirus and give it a try...

  Proxy Server you use?

  Try to download on the official Mozilla site and update it.

  • www.Mozilla.org

• just installed a last set of updates to security for vista, but now my Internet connection disappeared.

  Hi, I recently installed a series of updates to security for vista sp2 final, but now I've lost my Internet connection...
  I can get into safe mode with network and get on this path ok but obviously not ideal.
  I can see the latest patches from the Control Panel, etc., but when I want to uninstall the latest series does not appear. Anyone know how I can uninstall these and again one by one to find the culprit.
  Pulling my hair so any help greatly appreciated.

  Borrowed from Try3

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I hope this helps.

• Cisco NAC Profiler

  Hello

  I have some doubts if any1 can clearly it will be great. I have the deployment of gateway NAS OOB real ip in my network.

  Assuming that all ports are Nac_controlled. So as soon as the client caches they are in the local network virtual auth.

  now I have a cisco nac Profiler in my network which I will configure IP phones and printers.

  by example, if the port of the ip phone is connected to it will be also under auth vlan.

  so as soon as as ip phone gets plugged, Profiler cisco will see the profile and change the vlan auth to its vlan respective by mapping the profile and the profile of the NAC that we have mapped in the Profiler and given of the vlan in the user profile of the NAC for the ip phone.

  Please correct me if I'm wrong, for the understanding of the operation. I need profile of ip phones. I am not able to connect.

  It would be very useful if you can help me.

  Thanks in advance.

  Nitesh salvation,

  the NAC has no control over the voice VLAN, then this would be defined locally on each switch ports.

  For example, you assign it not the point endpoint IP Phone profiled in any role, because the input is 'ignored' and the phone works on the configured locally voice VLAN without going through the NAC.

  The IP phone case is different from that of printers and ATM... as in this case, these devices are looking at VIRTUAL local network access (which is commissioned by the NAC), and you do not expect to see all other devices (MAC addresses) on the same port of a printer, ATM or other endpoints without an agent. That being said, you can assign profiles different points of endpoints to different roles in this case.

  I hope that answers your questions.

  Kind regards

  Federico

• Base installation of Cisco NAC

  Hello

  I bought a Cisco NAC server and a Cisco NAC Manager.  I have it in the laboratory to test for the moment, but I would extend approximately 200 users possibly on campus lan.  I just check that a user is valid on active directory.  Perhaps the best way I can do that is by making a discovery on the server of the NAC to valid mac addresses.

  What is the best way to do this? That is to say

  user connects to a port on the campus lan

  Active directory checks that they are a valid user on the domain

  they get their usual dhcp address once they are authenticated

  If they are not a user validates on the field that they will not be authenticated

  I'm not worried about the verification of the antivirus, pc built... for now

  For the moment, I installed the server of the NAC and the NAC Manager and both can access it through a layer 3 switch.

  Thank you

  Kevin

  Kevin,

  Essentially, you ask for advice on how to do this. As I just pulled out of 1000 users NAC L2 VG OOB (who looks like, it's what you want to do) and a 3000user of the NAC L3 RIP OOB as well as OOB wirless and looking IB VPN right now. My best advice would be to buy the next book.

  Cisco NAC Appliance 'Host security with clean Access Application' by James Heary for about $60. (available on Amazon)

  This covers all deployment scenarios and is invaluable for me when I created the NAC. What it does is put in the necessary steps and is easier than flitting back and forth between the CAM and CASE manual.

  Hope that helps

• Cisco NAC offers Support

  Hello

  I have some question about Cisco NAC and don't know if it is able to support:

  1. can you packets qos to NAC honor/confidence when it is configured for inband/off band?

  2. for the creation of the lobby admin on local accounts management comments (using the own access device); cisco nac appliance does support

  the lobby admin via acs/external db authentication? If this isn't the case, adding a comment server would reach it?

  3 - is not cisco NAC appliance support wireless controller and the mixture of cisco/non-cisco switches? If so, if the switch supports snmp mib mac-notification/link/link down; would this be enough?

  4 is Cisco NAC comes with a predefined set of rules AV to verify that all AV support is running for the posture check (example if NAC supports 100 produced different viruses; can he check all 100 different product that can be installed on a PC for control of posture). An example of this would be hotel / that there are people of different products installed antivirus trying to access the network and the antivirus must run and installed and updated to access network). I know that the pre-confgiured default rule can check for installation/setting however not sure on the status of service / application running.

  Thank you.

  Hello

  For VGW configurations, you must have in separate subnets. For RIP, they can be in the same subnet without problem.

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• Cisco NAC server and check active number? Would this work?

  Hi all

  A client has achieved a question when we introduced Cisco NAC today.  They wondered, lets say, a client of Cisco NAC agent installed may be connected to the network switch. It has all valid requests and patch levels on his machine (posture validation check pass)

  However, even if the customer takes the position of all the parameters, they want to know that if the host name of the client (for most Windows laptops) does not exist in their active database (this database is a database of estate number which is in a similar format or .csv) posture validation must fail.

  Have you met such request like this before? Is there a function on the NAC server which checks a field against an external database as an active database?

  See you soon.

  Dumlu,

  Currently, it is not possible. You can create controls who can check values locally, but not against external data warehouses, so for this card against your thinking, NAC would have to know all the names of workstation before hand and then check against that. It is unwieldy and very very difficult to scale.

  If it's something you and your client think would be a good addition (and it sounds like a good idea) Please engage with your account team and ask them to request a feature for you.

  Thank you

  Faisal

• What is the difference between Cisco NAC and ACS?

  I am currently part of a new construction project and my Cisco account manager and sales engineer recommend Cisco NAC for our new MDF. I'm confused because I don't clearly know the difference between a Cisco ACS and the NAC. What is the difference?

  Thank you

  Chris

  Chris,

  The two are completely different, maybe the sales rep could present you with more information and application. Each offers a variety of services tailored to the specific needs. I think that we need to read more in depth on the proceeds of the NAC. NAC seems an excellent solution for authentication authorization but other regulatory compliance.

  When you see ask your representative to sales for more information/demo.

  ACS is more widely use as a central point to access control to network devices routers, an example is for acs accounting management and the authority to order on all devices on the network using acs as RADIUS server. Considering that the NAC is over a central point of safety inspection on earlier systems of access to your network by via LAN or outside, an example of these respected regulatory defined could be inspections could be virus definition checks before getting lan access thus preventing access to the LAN if the system does not have regulatory compliance defined in NAC access is denied. Another example could be the unknown local host connections etc... So, it seems that NAC is a much broader product that provides endpoint security internal, not only the authentication authorization as acs... ACS has been there for a long time, NAC is rather new product.

  NAC

  http://www.Cisco.com/en/us/NetSol/ns466/networking_solutions_package.html

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns394/ns171/ns466/ns617/net_qanda0900aecd800fdd6f_ns466_Networking_Solutions_Q_and_A.html

  ACS

  http://www.Cisco.com/en/us/products/sw/secursw/ps5338/index.html

  Rgds

  Jorge

• Being trained by Cisco NAC nuts! Help!

  Hi all

  Getting desperate here... been trying to get the solution NAC Cisco (Cisco NAC 3310) to work, but with limited success, and the results are currently desperately randomly. I have a lot of experience with Cisco product and so far this has been the most painful :-( Here, any help would be appreciated gladly!

  OK, here's the Setup: the cam and CASES are configured in mode OOB VG (Layer 2). I install everything by following the guide from Cisco (I hope) - different VLAN for the CASE, the cam and VLAN mapping, managed subnets, etc. to switch profiles configured. Yet, I get strange answers: some PCs are unable to connect to the network, even if successfully managed switch port informs the cam a new MAC is detected (varies the switch port to the vlan auth of vlan initial). I have accumulated my brain trying to figure out what's wrong, newspapers event does not indicate a lot of problems. Just to check on some uncertainties:

  1. for the managed subnet IP, should I check the box "Enable subnet based Vlan change?"

  2. for the subnet managed, if I put the IP address of subnet managed as the IP of the gateway? E.g. 110 VLAN (vlan not reliable) mapped to 10 VLANS (VLAN trust) which is the 10.1.10.0/24 subnet. The gateway is 10.1.10.254. So should I configure managed subnet IP/netmask as 10.1.10.254/255.255.255.0? Or choose another unused IP address from that subnet (for example 10.1.10.1)?

  3. I am also the experience of the situation where to connect with success (pass the verification of the NAC etc.), I unplugged my laptop on the port managed switch and after a while connected. This time no authentication happens, but the network connectivity is broken (even if the Cisco Agent is running). Seems that the network port is placed in the VLAN Auth, yet nothing is invited to open a session. Any ideas?

  W

  Woon,

  What policies do they install on your current user roles?

  You can try allowing all TCP/UDP and fragments to see if not connect at all times.

  Right-click on the agent access as well and select Properties. Make sure that there not a host of discovery, since it is an implementation of L2

  You also have to note the previous post, so if others have similar problems that they will look at this thread

  Thank you!

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• Satellite P300 - after Intel WLAN driver update cannot connect to the WLAN N

  After 4 months I have updated the driver for the WLAN. After installing the driver I m unable to connect to a network of N. recovery software but is not be able to connect to the network.
  I have already installed the Intel driver but nothing help.
  Are there some people who can help me solve this problem?

  I have a Satellite P300.

  Hello

  Firstly, it must ensure that your wireless network card and your WLan router would support the Draft N.

  Second, you should check if the project has been selected in the WLan card properties.
  This, to check the Device Manager-> properties-> Advanced tab WLan card

  Check it out