Update of FW RV320 1.1.1.06 = failure critical
Hello
I upgraded the router to your 1.1.1.06 last firmware and after it restarts (which takes forever btw) he comes back with:
Critical failure. Please contact the support.
Any idea on this? It is now unusable!
Hi Walter
From your description, "Flashes green PWR LED and solid red DIAG LED is all I get," the device is still in phase of boot loader. If you have tried the tftp method, but doesn't? Can try again you? You can use this tftp.exe (http://tftpd32.jounin.net/) to download the firmware on 192.168.1.1. Here are some details on the tftp upgrade.
1. power off
2 turn on with pressing the reset button, wait 10 seconds, until the turn of diag red LED and power LED flashing.
3. the value of lan pc 192.168.1.100
4. use the tftp client to the firmware of the device. Command of Windows for example: tftp-I 192.168.1.1 put RV32X_v1.1.1.06_20131206 - code.bin. Or using another client tftp as "http://tftpd32.jounin.net/.
5. after finished tftp, the device will restart itself.
6. after starting, driving power is turned on, diag led is off.
Tags: Cisco Support
Similar Questions
-
FF was running fast and stable until the beta update tonight. Later he crashed several times, sometimes with a total system crash, sometimes with a system is unresponsive, sometimes with a video driver leading to a BSOD crash.
I had to DL 22 release and restore. I am now on the output channel, not the beta channel.
System Setup: Dell Latitude 6410, Win 7 x 64, 128 GB SSD, 4 GB of RAM, Intel video hardware. Everything is up-to-date.
Trying to get out before it blocks again and then switching to 22.
Java plugin is usually disabled.
Toolbars are ABP, disconnection and download status bar.Update:
Have been able to run > 4 hours stable release 22 without hardware acceleration and long-awaited performance. I identified that my Crucial necessary M4 SSD firmware updated because of a problem that causes the BSOD after 5000 operating hours. Since the firmware update has been applied, I was stable.
Firefox may have been a catalyst, not a culprit. I wonder if my BSOD troubles began because FF or FF, as Flash module, was trying to make the disk space which had been rendered difficult by my bad SSD firmware.
Will post again in 24 HR works normally on 22 and then try 23 update to see if it is resolved.
Thank you all for the input. Hope my comments are useful somehow.
-
HP 550-127C: update the BIOS SSID 2 B 35 Installation failure
This BIOS updae (35 2B SSID) fails to install several times. No other information is given for the failure. My HP 550-127C running Windows 64-bit, version 1511 edition 10. Anyone have some help?
On the download page, it lists three BIOS ROM family IDS consisting of different updates. If she fails to install, try THIS PAGE and click on 'Check NOW' to see that one this page shows is the correct BIOS update
-
Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.
Hi PeterLloyd,
(1) what is the complete error message you receive?
(2) what version of Windows you are using on the computer?
(3) updates are you referring?
Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.
Method 2: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
UPDATE OF SECURITY FOR SQL SERVER 2005 SERVICE PAK (KB970892) HAS NO CODE 7358
WINDOWS _00007358 WINDOWS UPDATE _dt000 UPDATEI'm not able to finish the update above. When I try to turn off my cell phone, that the process is delayed because the computer tries to update and it is frustrating to wait the update complete error 7358.
Can it be fixed or can I delte this update to stop the delay to stop him?
See the section "How to get help" of http://support.microsoft.com/kb/970892
For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Security customer includes home links page free security update support, too
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time). It resulted in "Failure Configuring Windows Updates, changes of recovery".
Measures taken (without the fix):
-Reboot
-Restart in Boot Clean with Services MS no disabled state
-Updated Troubleshotter
-System Restore (3 weeks)
-DISM.exe / Online/Cleanup-image /Restorehealth
I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».
Updates at this point (November 14, 2014) identified KB3000061. When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».
Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101. A more complete list is available if it is useful.
Windows 8 Pro 64 bit w / Media Center
Norton Security Suite
THAT IS TO SAY 10.0.9200.17148
Worm update: 10.0.22
Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months. Always comes back to the previously installed Windows 8.
Otherwise, my computer works without other unusual problems.
Hi Brad,
Thank you for your response.
For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.
For more information, you can check the link below.
Update to Windows 8.1 of Windows 8.
http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
-
Hello. When I try to download the updates, this message appeared.
Help creating cloud / cloud creative applications download error
http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html
-
Another bloody updated with corrections of bugs that do not concern me. Your code is needlessly fat. A simpler solution would be appreciated, create fewer problems and lose the least resources, for more people.
Hi, major firefox versions are scheduled to be published on a cycle of 6 fixed weeks (the following is next week).
the 39.0.3 update that you are probably referring to, is a critical security patch affecting you as well since there are a discovered vulnerability, which can activate attack sites read files on your pc without leaving a trace. (nothing to do with 'bigger', for sure, since only a few lines of code had to be changed for this).https://blog.Mozilla.org/security/2015/08/06/Firefox-exploit-found-in-the-wild/
https://www.Mozilla.org/en-us/security/advisories/mfsa2015-78/ -
Update iOS 9.3.3 error on my iPad Air
I am able to download this update without problem. However, I get a failure to check the update error. This happens only on my iPad Air. I've updated on two models of iPhone 5 s and a mini iPad. Any ideas? Any suggestion? I deleted and reloaded the software update more than once.
Start here: If you see an error when you update or restore your iPad, iPhone or iPod - Apple Support
And here's more: Get-help with the Live - Support Apple iOS updates
-
Cannot leave a suspect site demanding that I have download an update "java".
A website that itself charged when I visited a not - quite healthy (but not morally bankrupt) site now not allow me to close the browser. He insists that I have download an "update to my java" because of anxiety "of security-critical.
It's completely absurd, but I used Task Manager to quit the application and now it's the page that opens as soon as I launch Firefox. Annoy her.
Is there a way to stop executing the script and return to the State prior to this malicious site did his thing without major surgery?
************************************************************************************ *** DO NOT CLICK*** The site URL is "http://www.downjava.info/update/ca/" *** DO NOT CLICK *** ************************************************************************************
Thank you!
Hello jambelly, open a new tab and enter Subject: config in the address bar (confirm the opinion). in there, search for the preference named javascript.enabled and double-click it in order to change its value to false. Then, it should immediately be possible to close the site scam in question. then return the preference javascript.enabled...
-
Last updated led to the degradation of the iphone
9.3.2 leads to the breakdown of my iphone 6 s (128). What can I do? When Apple finds a solution. 2nd update in a few months, what causes the failure.
Have you tried to reset your device?
This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
If this does not help, you can try your iPhone to downgrade to the previous version.
-
El Capitan of search works do not and cannot update to 11.2
EtreCheck version: 2.6.6 (226)
Report generated on 31/12/15, 22:47
Duration 09:59
Download EtreCheck from http://etrecheck.com
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
Hardware Information: (Does that mean?)
iMac (retina, 5K, 27 inch, mid-2015)
[Click here for the User Guide]
iMac - model: iMac15, 1
1 3.3 GHz Intel Core i5 CPU: 4 strands
8 GB of RAM expandable
[Click here for upgrade instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
0/DIMM1 BANK
Vacuum
BANK 1/DIMM1
Vacuum
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n/ac
Video information: (Does that mean?)
AMD Radeon R9 M290 - VRAM: 2048 MB
iMac 5120 x 2880
OS X El Capitan 10.11 (15A 284) - time since started: about 7 days
Disc information: (Does that mean?)
ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 999,03 go-go (437,28 free)
Storage of carrots: disk0s2 999.35 GB Online
USB information: (Does that mean?)
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Seagate Backup + Desk 3TO
disk3s1 (disk3s1)
: 262 KB Seagate Backup Drive (disk3s3) Volumes/Seagate Backup plus Drive: 3,00 (1.09 free) tuberculosis
Western Digital My Book 1 TB
disk2s1 (disk2s1)
: 32 KB Boot OSX (disk2s2)
: 134 MB WDBackup (disk2s3) / Volumes/WDBackup: 1.00 TB (817,03 GB free)
EPSON EPSON scanner
Burner DVD Super Multi HLDS Inc.
Hub keyboard Apple, Inc.
PIXART OPTICAL MOUSE USB
Apple Inc. Apple Keyboard
Lightning information: (Does that mean?)
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
Kernel extensions: (Does that mean?)
/ Library/Extensions
[loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]
[loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]
/ System/Library/Extensions
com [no charge]. Maxtor.driver.MaxtorFWPowSecDriver (1.1.0) [click for support]
com.maxtor.iokit.IOFireWireMxBt [no charge] (2.0.1) [click for support]
com.seagate.driver.PowSecDriverCore [no charge] (5.2.3 - 10.4 SDK) [click for support]
/ System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns
com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.3 - 10.4 SDK) [click for support]
com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.3 - 10.5 SDK) [click for support]
com.seagate.driver.SeagateDriveIcons [no charge] (5.2.3 - 10.4 SDK) [click for support]
Startup items: (Does that mean?)
RetroRun: Path: / Library/StartupItems/RetroRun
Startup items are obsolete in OS X Yosemite
Launch system officers: (Does that mean?)
com.apple.AssetCacheLocatorService.plist [killed]
com.apple.BezelUI.plist [killed]
com.apple.SafariCloudHistoryPushAgent.plist [killed]
com.apple.SafariPlugInUpdateNotifier.plist [killed]
[failure] com.apple.bird.plist [click for more information]
com.Apple.icloud.fmfd.plist [killed]
com.Apple.rtcreportingd.plist [killed]
6 killed process lack of RAM
Launch system demons: (Does that mean?)
com.apple.AssetCacheLocatorService.plist [killed]
com.Apple.Emond.aslmanager.plist [killed]
[killed] com.apple.periodic - weekly.plist
com.Apple.wdhelper.plist [killed]
4 processes killed due to lack of RAM
Launch officers: (Does that mean?)
[loading] com.adobe.AAM.Updater - 1.0.plist [click to support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]
[operation] com.adobe.AdobeCreativeCloud.plist [click to support]
[loading] com.divx.dms.agent.plist [click to support]
[loading] com.divx.update.agent.plist [click to support]
[failure] com.epson.esua.launcher.plist [click to support]
[operation] com.epson.eventmanager.agent.plist [click to support]
[failure] com.google.keystone.agent.plist [click to support]
[operation] com.sophos.uiserver.plist [click to support]
Launch demons: (Does that mean?)
[loading] com.adobe.ARMDC.Communicator.plist [click to support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]
[loading] com.adobe.SwitchBoard.plist [click to support]
[operation] com.adobe.adobeupdatedaemon.plist [click to support]
[loading] com.adobe.agsservice.plist [click to support]
[loading] com.adobe.fpsaud.plist [click to support]
[loading] com.google.keystone.daemon.plist [click to support]
[loading] com.linotype.FontExplorerX.securityhelper.plist [click to support]
[loading] com.microsoft.autoupdate.helpertool.plist [click to support]
[loading] com.microsoft.office.licensing.helper.plist [click to support]
[loading] com.microsoft.office.licensingV2.helper.plist [click to support]
[loading] com.skype.skypeinstaller.plist [click to support]
[operation] com.sophos.common.servicemanager.plist [click to support]
User launch officers: (Does that mean?)
[loading] com.adobe.AAM.Updater - 1.0.plist [click to support]
[loading] com.linotype.FontFolderProtector.plist [click to support]
Items in user login: (Does that mean?)
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
Hidden Google Chrome application (/ Applications/Google Chrome.app)
Adobe Illustrator CC 2015 application (/ Applications/Adobe Illustrator 2015/Adobe Illustrator.app CC)
FontExplorer X Pro Application (/ Applications/FontExplorer X Pro.app)
Apple-CCS-20150824-070411 UNKNOWN (missing value)
Application of Google Reader (Google Drive.app/Applications /)
Request for EvernoteHelper (/ Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
EverNote Application (/ Applications/Evernote.app)
Other applications: (Does that mean?)
[ongoing] com.adobe.Acrobat.Pro.45792
[ongoing] com.adobe.Photoshop.49632
[operation] com.adobe.acc.AdobeDesktopService.148832.C9F7A6AD-E831-4B61-889E-2A255AA2F176
[ongoing] com.Adobe.accmac.125152
[ongoing] com.Adobe.Illustrator.47712
[operation] to THE demon com.apple.xpc.launchd.oneshot.0x10000006.Microsoft
[ongoing] com.etresoft.EtreCheck.448352
[ongoing] com.evernote.Evernote.59232
[ongoing] com.evernote.EvernoteHelper.59552
[ongoing] com.google.Chrome.16352
[ongoing] com.google.GoogleDrive.64032
[ongoing] com.intuit.QuickBooks2010.97952
[ongoing] com.linotype.FontExplorerX.63072
[ongoing] com.microsoft.Word.207712
[ongoing] com.Sophos.AutoUpdate
[ongoing] com.Sophos.Configuration
[ongoing] com.Sophos.InterCheck
[ongoing] com.Sophos.notification
[ongoing] com.Sophos.scan
[ongoing] com.Sophos.sxld
[ongoing] com.Sophos.webd
Plug-ins Internet: (Does that mean?)
OVSHelper: Version: 1.1 [click for support]
Default browser: Version: 601 - SDK 10.11
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [click for support]
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [click for support]
RealPlayer Plugin: Version: Unknown [click for support]
AdobeAAMDetect: Version: 3.0.0.0 - 10.9 SDK [click for support]
AdobePDFViewerNPAPI: Version: 15.009.20069 - SDK 10.8 [click for support]
DivX Web Player: Version: 3.5.0.5 - 10.10 SDK [click for support]
FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.5.6 - 10.6 SDK [click for support]
AdobePDFViewer: Version: 15.009.20069 - SDK 10.8 [click for support]
Silverlight: Version: 4.0.51204.0 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.11 check the version of the SDK
User Plug-ins internet: (Does that mean?)
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]
3rd party preference panes: (Does that mean?)
Flash Player [click for support]
Flip4Mac WMV [click for support]
Scanners HP [click for support]
Time Machine: (Does that mean?)
Skip system files: No.
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
Macintosh HD: Disc size: 999,03 GB disc used: 561,75 GB
Destinations:
Backup drive Seagate Plus [Local]
Total size: TB 3.00
Total number of backups: 43
An older backup: 06/16/15, 18:53
Last backup: 12/31/15, 20:35
Size of backup drive: Excellent
Backup TB 3.00 size > (disk size 999,03 GB X 3)
Top of page process CPU: (Does that mean?)
5% WindowServer
4% adobe Photoshop CC 2015
3% kernel_task
3% adobe CEF Helper (3)
2% Evernote
Top of page process of memory: (Does that mean?)
1.13 GB kernel_task
516 MB mail
451 MB Google Chrome Helper (5)
Com.apple.WebKit.WebContent (4) 328 MB
221 MB Adobe Illustrator
Virtual memory information: (Does that mean?)
1.56 GB free RAM
6.43 GB used RAM (1.70 GB being cached)
10.81 GB used Swap
Diagnostic information: (Does that mean?)
December 29, 2015, 12:51:47 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2015-12-29-125147_ [redact ed] .crash
December 29, 2015, 08:02:50 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2015-12-29-080250_ [redact ed] .crash
December 29, 2015, 07:35:21 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2015-12-29-073521_ [redact ed] .crash
First uninstall Sophos and then see how your Mac works.
-
C4599 Printer PC unable to find updated Firmware
Hi all, I'm trying to update the firmware on my PC Windows XP (HP laptop). The software is downlaoded OK but when I run it does not find the printer. The printer is connected to my local network (infrastructure mode) via WiFi and prints OK from various computers laptops (Win XP, Win Vista and Win 7) in the House. It prints via WiFi or via the USB port but it can not be found with or without the USB connected to the PC (laptop) Windows by software update Firmware.
Help, please!
Thank you
gedi42
You suffer from one of the problems regarding the update of the firmware?
I've actually found updates of the firmware available for your printer, only critical updates.
Here is the update that I found:
This is were you referencing?
-
Cannot install updates for Office 2007 in Windows 7: error code 80070658
I was informed that I have 19 important updates for 2007 Office applications. When I try them all or even an update I get error code 8070658 after the failure of the update.
Help!
Hi kleintax,
Welcome to the Microsoft Answers Forum!
We would like to know if the error code is with the office updates, so yes, you can see the feed in the focus groups of the Bureau for the best support. Please visit the link below to find a community that will support what ask you
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
Step 1
Uninstall the update failed program and features, steps to follow
i. open Control Panel from the start menu
II. Select programs and features
III. click on view installed updated
IV. uninstall the update failed
Step 2:
Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
How to reset the Windows Update components: http://support.microsoft.com/kb/971058
Another link, you can check: http://support.microsoft.com/default.aspx/kb/947821
Step 3:
Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Updates Windows at a standstill
When you run windows updates, updates to a standstill while activating. After four hours of no progress, I closed the brouser and returned to windows updates to try again. I wouldn't let me not try again to update but it gave me a list of the updates failed. It has no malware or virous in the pc. I'm afraid to restart like this before happoned on another PC, and files made by transformed current updates missing including IE8. I had no way to solve the problem, but re - install the software
Hi ALANDALEB,
· Provide updates failed number of KB.
· What is the error message you received the update failed?
· How does the installed?
To get the error message code or error of update failed, you can check the update history in sight. Follow the steps below:
a. Click Start, in the search box, type in update
b. click on windows Update
c. click view update history
d. If a double failure click the update has failed to get the error code and error message.
Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below:http://www.microsoft.com/downloads and check if the problem is resolved.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
All mounting options "link invalid brother" and a player that will not go up?
I'm doing some repairs on a MBPro (machine girl) who was running El Capitan (10.11). I started upward in OS X Recovery mode, but disk utility fails because the drive does not appear. I also tried the Warrior Disk and got a similar error (2351, 5:4112
-
Recently seen USB3.0 adapters for laptops. I would like to my HP Pavilion dv6-2162nr - good idea or bad?
-
Why my custom control to change the size, when I open it on different computers?
I create a custom control, and when I open it on other computer it changes size
-
A few years ago I've "downgraded" from Vista to XP because I had a bunch of stand-alone for XP Pro and was not at all satisfied with Vista. Now that XP is no longer supported, I need to reformat and install Vista for the sake of security. Sony wants
-
HelloWe are on Hyperion version 11.1.2.2. We have web application FDM and installed and configured on a server and ODI 10.1.3.6 ERPi and the FDM Server installed on a different server. We strive configure ERPI to allow to drill holes in Peoplesoft EN