Update of Oracle10g to 11g using dbua?

Similar Questions

• The Oracle Express Edition XE upgrade to 11g (11.2) using DBUA

  Hi all
  
  I have a server Oracle xe on a platform of red hat linux 4, I need to upgrade to 11g (11.2) using DBUA.
  This is the first time for me to use DBUA, I'm following the steps described in the Oracle database upgrade guide.
  I'm a little confused, I have a very basic question:
  
  in step pre using DBUA, when I install the 11g, can I install the oracle software only, or can I also create an 11g database?
  in other words, I have the impression that the DBUA will upgrade the XE database itself, change the data files and tables of the tenth to 11g?
  
  Thanks in advance for your time.

  You did not mention the full version of your database in the tenth. If one 10.2.0.1, you cannot improve it 11.2 using DBUA directly. First, you must update at least to 10.2.0.2 before going to 11.2.

  Please refer to Metalink Notes 980693.1 and 837570.1 for more details.

• Impossible to move from Oracle 10g 10.2.0.3, 10.2.0.4 for using DBUA

  I installed Oracle 10 g 10.2.0.3 on Windows Vista operating system on Dell laptop. The installation was successful.
  
  I also installed the accompanying CD and he managed also. The HOUSE of ORACLE for the database orcl and companion CD components are the same, i.e.,.
  'c:\oracle\product\db_1 '.
  
  I downloaded the patch from Metalink p6810189_10204_Win32. I tried to upgrade to 10.2.0.4 10.2.0.3 above the wizard database upgrade (DBUA)
  and I can't.
  
  When I try to upgrade the database (orcl starter), I get the following message:
  
  "All the components of the database selected"orcl"to Oracle home"c:\oracle\product\db_1"have already been updated. Select a different database to perform
  the upgrade. »
  
  When I connected to the orcl SYS database and questioned the instance of $ v, the version is still also shows 10.2.0.3.
  
  I also have to apply the patch in October 2008 CPU after the orcl database is upgraded to 10.2.0.4.
  
  Thank you!
  
  Edited by: inthira on December 30, 2008 18:28
  
  Edited by: inthira on December 30, 2008 18:30
  
  Edited by: inthira on December 30, 2008 18:31

  The correct sequence is:

  1. download the patch
  2 extract the hotfix to a folder "patch" (directory). Always create a separate patch for each patch folder.
  3. shutdown the database and all database services (database, listener, DBConsole etc.)
  4. apply the patch to update binary files. On Windows, this would mean running "" SETUP. "" EXE"in the folder"patch. "
  5. the NEXT step is to upgrade the database. Use DBUA or SQL scripts that are documented in the README file in the patch.
  6. Subsequently, apply the latest Patch of CPU / current

• I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  If it was in iCloud, turn, if they were not, tell us where they have been

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• I get the same two updates Microsoft fixit fixit, KB2656351 & used KB2600217

  I get the same two updates Microsoft fixit fixit, KB2656351 & used KB2600217

  TIP: See paragraph .NET Framework specific to 4 first of all, the resolution method 2 (only!) on this page-online http://support.microsoft.com/kb/976982

  After the execution of the repair, given to zero & test.

• What computer privileges must install and apply the updates for Creative Apps clouds using Windows 7?

  What computer privileges are required to install and apply the updates for Creative Apps clouds using Windows 7?

  When you work for a company that controls the software installed on your computer, it is important to know if IT supports is necessary to install and apply the updates when updates are available.

  It is important to know this information before you buy.

  Thank you for your support.

  ~ Paul Miller

  admin command is required for installation or any changes made to the software from your computer.

• Since the last update Photoshop CC will not use my GPU while Lightroom CC works. East of GPU Radeon HD 5700

  Since a recent update Photoshop CC will not use my GPU saying I do not have a minimum of 512 MB of vRam and wont let me enable it, even if I have 1 GB of vRam...

  When I load CC in Lightroom, it detects, is already selected for use.

  I use Windows 10 with 8 GB of ram and a Radeon HD 5700

  any ideas on how to fix.

  Go to the web site AND and download the most recent Wibdows 10 device driver for your graphics card.  It looks like you have installed is not correct.  No date shows no VRAM.

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. IsIntegratedGLGPU = 0

  glgpu [0]. GLMemoryMB = 0<>

  glgpu [0]. GLName ="? »<>

  glgpu [0]. GLVendor = "ATI Technologies Inc."

  glgpu [0]. GLVendorID = 0

  glgpu [0]. GLDriverVersion ="? »<>

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "AMD Radeon HD 5700 Series.

  glgpu [0]. GLRendererID = 0

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver ="? »<>

  glgpu [0]. GLDriverDate ="? »<>

• Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  I also have this problem. I was told that it is a bug, they work.

• I'm trying to update CS 6Illustrator tool by using the update but I continually get an error saying:

  I'm trying to update CS 6Illustrator tool by using the update but I always get an error saying "updates could not be applied." How can this be?

  Here is my log file:

  Update Adobe Illustrator CS6 (version 16.2.1)

  Failed installation. Error code: U44M1P7

  If you are using a mac: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• update the XML name by using sql

  Hello
  
  IAM using oracle 11g
  
  create table example (ch. clob);
  insert into a values (sample)
  ? XML version = "1.0"? (> < ABC > < company > < / ABC > < A employee > < name > < / name > < sex > M < / sex > < / employee > < employee > < name > B < / name > < sex > M < / sex > < / employee > < employee > < name > c < / name > < sex > F < / sex > < / employee > < / business > ');
  
  for example I want to update the 'ABC' to 'CDE' XML element
  
  ? XML version = "1.0"? (> < company > < ORDER > < / EBR > < A employee > < name > < / name > < sex > M < / sex > < / employee > < employee > < name > B < / name > < sex > M < / sex > < / employee > < employee > < name > c < / name > < sex > F < / sex > < / employee > < / company > ');
  
  
  How can I update this XML element name.
  
  I search the web, I found UPDATEXML it is used to change the value of XML. but I want to display xml name.
  
  Concerning
  Oracle user

  To start, if you want a pure XML solution, you should really use an XMLType column to store XML data in the first place.
  It allows several types of optimization takes place, according to the model of storage used.
  11 g, I highly recommend the use of binary XML storage (this is the default template from 11.2.0.2).

  IAM using oracle 11g

  What version exactly?

  On 11.2.0.3, you can use XQuery Update Facility:

  SQL> create table sample_data (doc xmltype);
  
  Table created
  
  SQL> insert into sample_data values (
    2  '
    3  
    4   
    5   AM
    6   BM
    7   cF
    8  ');
  
  1 row inserted
  
  SQL> commit;
  
  Commit complete
  
  SQL> set long 500
  SQL> select xmlserialize(document
    2           xmlquery(
    3            'copy $d := /Company
    4             modify rename node $d/ABC as "CDE"
    5             return $d'
    6            passing t.doc
    7            returning content
    8           )
    9           as clob indent
   10         )
   11  from sample_data t
   12  ;
  
  XMLSERIALIZE(DOCUMENTXMLQUERY(
  --------------------------------------------------------------------------------
  
    
    
      A
      M
    
    
      B
      M
    
    
      c
      F
    
  
   
  

  Other solutions of "XML" involve recursive or as mentioned XQuery, XSLT functions:

  SQL> SELECT XMLSerialize(DOCUMENT
    2    XMLTransform(
    3      t.doc
    4    , xmltype('
    5       
    6        
    7          
    8            
    9          
   10        
   11        
   12          
   13            
   14          
   15        
   16      ')
   17    )
   18    AS CLOB INDENT
   19  )
   20  FROM sample_data t
   21  ;
  
  XMLSERIALIZE(DOCUMENTXMLTRANSF
  --------------------------------------------------------------------------------
  
  
    
    
      A
      M
    
    
      B
      M
    
    
      c
      F
    
  
   
  

• All URLS pointing to empty SRDemo of code (migrated to 11G using trinidad)!

  Hello
  
  Is someone can you please tell me where I might find the code for SRDemo after the migration and using the Trinity? All URLS Oracle are empty.
  
  Someone even said that JDev-> help-> check for updates will have. But I don't see it here. Help, please!
  
  In fact, all PPR sections in our application do not work after migration from 10g to JDev11.1.1.5. I'm sure that it has something to do with the libraries. For this reason, I am looking for the SRDemo code example (after migration) so that I can compare mine with theirs. I'll also take here what is happening - consider 2 drop downs - a country and a city. By selecting the country must complete the fall of the city down. Now the bean method that brings back the city list IS APPORTANT BACK ALL CITIES WHEN the USER SELECTED the COUNTRY (as seen on sys.outs). Just that the page is not refreshing to show these values in the drop-down list city. When the command like 'Go' button is clicked, and then refreshes the page and the city drop-down list displays the options in town.
  
  The code on the jspx alll seems good.
  
  Thank you

  http://www.Oracle.com/technetwork/JP/developer-tools/jdev/srdemosampleadfbc-migrated-to-11g-o-131302-ja.zip

• I've updated my adobe plugin but FF continues to turn off and will not perform the update. I can't use FF if it maintains this doing.

  I have an error message and cannot play the videos on yahoo and a variety of sites. I click on FF to check the updates, but it gets stuck 'connection with mozilla '. I like FF, but I have no time to solve such problems.

  Hello phxpuma, adobe has released a critical fix for a vulnerability in its version of the flash plugin, which is apparently already exploited in the wild. That's why firefox will block the precarious versions which run by default on Web sites for your protection. https://helpx.Adobe.com/security/products/Flash-Player/apsb14-27.html https://addons.Mozilla.org/Firefox/blocked/p794

  Please update Adobe Flash Player version 16.0.0.235 as soon as possible, that you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin-based browsers).

• With the last update auto-fill in frequently used email addresses were significantly slower to the point is now a nuisance.

  When you send e-mail to the same people over and over Thunderbird starts automatically what you guess after just a few keystrokes.

  For example, if I type js it will before semi-automatic [email protected] and I won't have to type something more.
  In the last update, the performance has regressed to what was instant now a few tenths of a second and is a big nuisance.
  Now I type in js and click on enter I just get js. If I type js and then pause for a moment and then fills semi-automatic.

  Can you if you please correct it.

  I don't think you should have concerns about installing MoreFunctionsForAddressBookbecause it's an add-on well known and widely used.

  It is unlikely that Mozilla will cancel the changes, but it may be months or years before they solve the problem. If the combination of the add-on and the CT 31 does not for you, it is always possible to reinstall the previous version:

  http://FTP.Mozilla.org/pub/mozilla.org/Thunderbird/releases/24.8.0/Win32/