Update of table with invalid identifiers
Hello!I use a third-party plug-in and that comparisons of chemical structures. I want to update a table with the values of the other when the plugin matches two rows. However, I'm a problem invalid identifier.
Two tables:
PLATES: a VARCHAR2 columns of PLATE_SMILES, IN_DB
INVEST: a VARCHAR2 columns of SMILES
The operator is a binary: jc_compare (PLATE_SMILES, SMILES) = 1 (or 0 if they do not match)
I want my query to say: "If comparison SMILES, PLATE_SMILES = 1, define IN_DB = 1 for row" - effectively asking if PLATE_SMILES exists in the table INVEST.
I tried a number of "renditions", all identifiers not valid donations. Here is an example:
Update (select plate. PLATE_SMILES, plate. IN_DB, invest. SMILES
plate PLATES
INVEST invest
WHERE jc_compare (PLATE_SMILES, SMILES) = 1)
set plate. IN_DB = 1;
ORA-00904: "FLAT". "" IN_DB ": invalid identifier
I hope that this should be an easy fix, and any help is greatly appreciated!
Hello
You have
UPDATE (SELECT plate.plate_smiles,
plate.in_db,
invest.smiles
FROM plates plate, invest invest
WHERE jc_compare ( plate_smiles, smiles) = 1)
SET plate.in_db = 1; -- Error here
PLATE is not known outside the display online. Just remove it.
Concerning
Peter
Tags: Database
Similar Questions
-
Best way to update a table with separate values
Hi, I would really appreciate some advise:
I need to regularly perform a task where I update 1 table with all the new data that has been entered in another table. I cannot perform a complete insert because this will create data duplicated each time it works, so the only way I can think of is the use of cursors in the script below:
CREATE OR REPLACE PROCEDURE update_new_mem IS
tmpVar NUMBER;
CURSOR c_mem IS
SELECT nom_membre, member_id
OF gym.members;
CREC c_mem % ROWTYPE;
BEGIN
OPEN c_mem.
LOOP
SEEK c_mem INTO crec;
EXIT WHEN c_mem % NOTFOUND;
BEGIN
UPDATE gym.lifts
Name = crec.member_name
WHERE member_id = crec.member_id;
EXCEPTION
WHEN NO_DATA_FOUND THEN NULL;
END;
IF SQL % NOTFOUND THEN
BEGIN
INSERT INTO gym.lifts
(name, member_id)
VALUES (crec.member_name, crec.member_id);
END;
END IF;
END LOOP;
CLOSE C_mem;
END update_new_mem;
This method works, but y at - it a (faster) easier way to update another table with new data only?
Thank you very much>
This method works, but y at - it a (faster) easier way to update another table with new data only?
>
Almost anything would be better than this treatment of slow-by-slow loop.You don't need a procedure, you should just use MERGE for this. See the examples in the section of the MERGER of the doc of the SQL language
http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9016.htmMERGE INTO bonuses D USING (SELECT employee_id, salary, department_id FROM employees WHERE department_id = 80) S ON (D.employee_id = S.employee_id) WHEN MATCHED THEN UPDATE SET D.bonus = D.bonus + S.salary*.01 DELETE WHERE (S.salary > 8000) WHEN NOT MATCHED THEN INSERT (D.employee_id, D.bonus) VALUES (S.employee_id, S.salary*.01) WHERE (S.salary <= 8000);
-
Update of table with 14 million records
good day, I'm updating a table with 14 million documents column. using the data from another table.
This takes terrible time just updated to 500,000 over the weekend, which is unacceptable.
ideas to improve my code and get the fastest update is much appreciated.
DECLARE
TYPE vc_type is table of index varchar2 (20) by pls_integer;
type tabtype_rowid is table of pls_integer rowid indexes;
my_cur sys_refcursor;
cur_limit integer: = 10000;
tab_rowid tabtype_rowid;
Start
OPEN FOR My_cur
SELECT value, rowid
TABLE 1A
where the value IS NOT NULL
and id is null;
loop
collect the fetch my_cur in bulk in tab_value, cur_limit limit tab_rowid;
FORALL k IN 1.tab_npi.count
UPDATE table 1A
A.ID = (select id SET
in Table 2b
where value = tab_value (k)
and rownum = 1
)
WHERE a.rowid = tab_rowid (k);
COMMIT;
When the output tab_value.count < cur_limit;.
end loop;
END;
Thank you903537 wrote:
I tried to update basic training, as a first step and it crashed...He didn't fail, it failed.
-
Update of table with no column
Hello
Why oracle is that although the statement is incorrect? is there any docid for this?
SQL > select banner version of v$.
BANNER
----------------------------------------------------------------
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE Production 9.2.0.8.0
AMT for Solaris: 9.2.0.8.0 - Production Version
NLSRTL Version 9.2.0.8.0 - Production
SQL > desc one
Name Null? Type
----------------------------------------- -------- ----------------------------
AA NUMBER (1)
BB NUMBER (1)
SQL > desc b
Name Null? Type
----------------------------------------- -------- ----------------------------
AA NUMBER (1)
CC NUMBER (1)
SQL > select * from a;
AA BB
---------- ----------
1 1
2 2
3 3
4 4
3 s
SQL > select b bb;
Select bb b
*
ERROR on line 1:
ORA-00904: "BB": invalid identifier
SQL > update a game aa = 3 where bb (select b BB); -> bb of the column does not exist in table b
5 lines to date.
SQL > select * from a;
AA BB
---------- ----------
1 of 3
1 p
3 3
3 4
6 P
Thank you
ShankerNo specific document. He has correlated subqueries. There is, of course, usually join condition.
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_10002.htm#i2066912
-
update of table with similar registration information using the same key
Version: 11.1.0.7.0
We have large table probably 30 M records
-test code table follows
create table people)
person_id number,
first name varchar2 (50).
middle_name varchar2 (50).
last_name varchar2 (50)
);
insert into persons (person_id, first_name, last_name, middle_name) values (1, 'JOHN', 'A', 'DOE');
insert into people (person_id, first_name, last_name, middle_name) values (1, 'JOHN', ","DOE");
insert into persons (person_id, first_name, last_name, middle_name) values (1, 'JOHN', 'ADAM', 'DOE');
insert into persons (person_id, first_name, last_name, middle_name) values (2, 'JOHN', ' C ', 'DOE');
insert into people (person_id, first_name, last_name, middle_name) values (2, 'JOHN', ","DOE");
insert into people (person_id, first_name, last_name, middle_name) values (3, 'JOHN', ","MOE");
insert into persons (person_id, first_name, last_name, middle_name) values (3, 'JOHN', 'FRANK', 'MOE');
I am trying to write more efficient code to take the middle name of the most complete and updated all records with the same KEY (person_id) with her.
Expected result:
1, JOHN, ADAM, DOE
1, JOHN, ADAM, DOE
1, JOHN, ADAM, DOE
2, JOHN, C., DOE
2, JOHN, C., DOE
3, JOHN, FRANK, MOE
3, JOHN, FRANK, MOE
Hello
Here is an example of the use of the aggregate LAST instead of the function ROW_NUMBER analytic function:
MERGE INTO dst people
WITH THE HELP OF)
WITH got_longest_middle_name AS
(
SELECT person_id
, MIN (middle_name) DUNGEON (DENSE_RANK LAST ORDER OF LENGTH (REPLACE (middle_name, '.')))
AS longest_middle_name
AMONG the people
WHERE middle_name IS NOT NULL
GROUP BY person_id
)
SELECT person_id
longest_middle_name
Got_longest_middle_name c - c is for candidates
WHERE DOES NOT EXIST)
SELECT 1
AMONG the people
WHERE person_id = c.person_id
AND c.longest_middle_name NOT AS REPLACE (middle_name, '.'). '%'
)
) src
WE (dst.person_id = src.person_id)
WHEN MATCHED THEN UPDATE
SET dst.middle_name = src.longest_middle_name
WHERE dst.middle_name <> src.longest_middle_name
OR dst.middle_name IS NULL
;
I suspect that this may be a little faster, but try it on your system with your data to make sure.
-
Update a table with one column of another
Oracle 11g
Helloi'im trying to update the two columns of table SUPPORT (SUPPORT_X, SUPPORT_Y) with two columns of table POST_HTA_BT (POSTHTABT_GPS_X, POSTHTABT_GPS_Y)
Understand that the two tables have the colum below:
SUPPORT (SUPPORT_ID, SUPPORT_PLAQUE, POSTHTABT_ID, SUPPORT_X, SUPPORT_Y,...)
POST_HTA_BT (POSTHTABT_ID, POSTHTABT_GPS_X, POSTHTABT_GPS_Y,...)
The SUPPORT_PLAQUE has type varachar. Except the keys, the other columns are varchar type in both tables.
The point here is to update the support_x, support_y with posthtabt_gps_x and posthtabt_gps_y.But before the update we have Sheik if the fifth number of the support plate is a number of characters from "0" to "9"and the rest of the caracter of the support_plaque is '00000'
Please note that the support_plaque is stored in the table with the form: "0025800000!"
So I did the below script, I try to execute in sql develop.
SET SERVEROUTPUT ON
DECLARE
chiffre_liste varchar (200): = '0 ', '1', '2', '3', '4', ' 5 ', ' 6' ', 7', ' 8 ', ' 9';
CURSOR CUR_GPS_SUPPORT IS
Select MEDIA. SUPPORT_X, SUPPORT. SUPPORT_Y, POSTE_HTA_BT. POSTHTABT_ID, SUPPORT. EXPL_ID,
SUPPORTED. SUPPORT_PLAQUE, POSTHTABT_GPS_X, POSTHTABT_GPS_Y
support,.
POSTE_HTA_BT
where
SUPPORTED. SUPPORT_X IS NULL and
SUPPORTED. SUPPORT_Y IS NULL and
SUPPORTED. POSTHTABT_ID = POSTE_HTA_BT. POSTHTABT_ID and
SUPPORTED. EXPL_ID = POSTE_HTA_BT. EXPL_ID
Order of SUPPORT. POSTHTABT_ID;w_POSTHTABT_ID POSTE_HTA_BT. Type of POSTHTABT_ID %;
w_SUPPORT_X SUPPORT. TYPE % SUPPORT_X;
w_SUPPORT_Y SUPPORT. TYPE % SUPPORT_Y;
w_EXPL_ID SUPPORT. TYPE % EXPL_ID;
w_SUPPORT_PLAQUE SUPPORT. TYPE % SUPPORT_PLAQUE;
w_POSTHTABT_GPS_X POSTE_HTA_BT. TYPE % POSTHTABT_GPS_X;
w_POSTHTABT_GPS_Y POSTE_HTA_BT. TYPE % POSTHTABT_GPS_Y;BEGIN
DBMS_OUTPUT. Put_line ('loading the coordoonnees GPS - GPS Coord update takes care of starting ');FOR HEART LOOPING CUR_GPS_SUPPORT
w_POSTHTABT_ID: = cur. POSTHTABT_ID;
w_SUPPORT_PLAQUE: = cur. SUPPORT_PLAQUE;
w_SUPPORT_X: = cur. SUPPORT_X;
w_SUPPORT_Y: = cur. SUPPORT_Y;
w_POSTHTABT_GPS_X: = cur. POSTHTABT_GPS_X;
w_POSTHTABT_GPS_Y: = cur. POSTHTABT_GPS_X;If substr (cur.support_plaque, 5, 1 chiffre_liste) and substr (cur.support_plaque, 6, 5) = '00000'
w_SUPPORT_X: = CUR. POSTHTABT_GPS_X
w_SUPPORT_Y: = CUR. POSTHTABT_GPS_Y
END if;
EXCEPTION WHEN NO_DATA_FOUND THEN w_SUPPORT_X: = NULL and w_SUPPORT_Y: = NULL;
END;-Updated the table of the supports
Update SUPPORT
Set SUPPORT_X = w_SUPPORT_X,
SUPPORT_Y = w_SUPPORT_Y
where SUPPORT_PLAQUE = w_SUPPORT_PLAQUE;
-On valid imm? immediately
commit;
EXCEPTION when no_data_found then null;
-No details found
END;
END;
/and I got the following errors:
Error report:
ORA-06550: line 2, colum 34:
PLS-00103: symbol ',' met instead of one of the following symbols:* & = - + ; <>/ is mod remains not rem
<>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
like4 likec between | submultiset of type multiset Member
ORA-06550: line 2, column 52:
PLS-00103: symbol ';' met instead of one of the following symbols:), * & = - + <>/ is mod remains not rem = >
<>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
like4 likec between | Member of multiset must
ORA-06550: line 38, colum 48:
PLS-00103: symbol 'CHIFFRE_LISTE' met instead of one of the following symbols:(
Symbol "(" a été substitué à "CHIFFRE_LISTE" verser continuer.) "
ORA-06550: line 39, 12 colum:
PLS-00103: symbol 'W_SUPPORT_X' met instead of one of the following symbols:), * & -+ / at rem mod < Hurst (*) > rest and or.
multiset
ORA-06550: line 40, 12 colum:
PLS-00103: symbol 'W_SUPPORT_Y' met instead of one of the following symbols:. (), * @ % & = - + <>/ is mod remains not rem
<>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
like4 likec between | mult
ORA-06550: line 41, colum 9:
PLS-00103: symbol 'END' met instead of one of the following symbols:. (), * @ % & = - + <>/ is mod remains not rem
<>< Hurst (*) > or! = or ~ = > = < = <>and like2 or
like4 likec between | multiset members
06550 00000 - "line %s, column % s:\n%s".
* Cause: Usually a PL/SQL compilation error.
* Action:I checked the line number, but do not see the error in my code.
Please could you help me?
peace
Hello
glad to know that it worked. In fact, I don't see the reason to make these complicated processes.
Remember the mantra:
- If you can do it with SQL then do it with SQL
Good evening!
Alberto
-
How to update the table with the number management
Hello
I need as there is a loc_tab of the created table as below,
CREATE TABLE loc_tab
(
Country_ID NUMBER,
country_code VARCHAR2 (3),
country_name VARCHAR2 (50).
State_ID NUMBER,
state_code VARCHAR2 (3),
state_name VARCHAR2 (50).
city_id NUMBER,
city_code VARCHAR2 (3),
city_name VARCHAR2 (50)
);
I inserted records like below,
Now, I wanted to update the table such that all ID columns are updated with running number.COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME IND INDIA TN TAMIL NADU CHN CHENNAI IND INDIA TN TAMIL NADU TRI TRICHY IND INDIA TN TAMIL NADU CMT COIMBATORE IND INDIA TN TAMIL NADU MDU MADURAI IND INDIA AP ANDHRA PRADESH HYD HYDERABAD IND INDIA AP ANDHRA PRADESH SEC SECUNDRABAD AUS AUSTRALIA QLD QUEENSLAND BRI BRISBANE AUS AUSTRALIA TAS TASMANIA HB HOBART AUS AUSTRALIA TAS TASMANIA CCE CITY OF CLEARANCE AUS AUSTRALIA TAS TASMANIA BUR BURNIE
Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
Here are the contents of the table, and that's how the table should be updated,
Thank you and best regards,COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME 1 IND INDIA 1 TN TAMIL NADU 1 CHN CHENNAI 1 IND INDIA 1 TN TAMIL NADU 2 TRI TRICHY 1 IND INDIA 1 TN TAMIL NADU 3 CMT COIMBATORE 1 IND INDIA 1 TN TAMIL NADU 4 MDU MADURAI 1 IND INDIA 2 AP ANDHRA PRADESH 1 HYD HYDERABAD 1 IND INDIA 2 AP ANDHRA PRADESH 2 SEC SECUNDRABAD 2 AUS AUSTRALIA 1 QLD QUEENSLAND 1 BRI BRISBANE 2 AUS AUSTRALIA 2 TAS TASMANIA 1 HB HOBART 2 AUS AUSTRALIA 2 TAS TASMANIA 2 CCE CITY OF CLEARANCE 2 AUS AUSTRALIA 2 TAS TASMANIA 3 BUR BURNIE
Shiva
-
move the lob segment fails with invalid identifier
Why this fails:
SQL > desc APPLSYS. WF_INBOUND_TABLE
Name Null? Type
----------------------------------------- -------- ----------------------------
Q_NAME VARCHAR2 (30)
MSGID NOT NULL RAW (16)
CORRID'ART VARCHAR2 (128)
PRIORITY NUMBER
NUMBER OF THE STATE
TIMESTAMP DELAY (6)
NUMBER OF EXPIRY
TIME_MANAGER_INFO TIMESTAMP (6)
NUMBER OF LOCAL_ORDER_NO
NUMBER OF CHAIN_NO
NUMBER OF THE CSCN
DSCN NUMBER
ENQ_TIME TIMESTAMP (6)
NUMBER OF ENQ_UID
ENQ_TID VARCHAR2 (30)
DEQ_TIME TIMESTAMP (6)
NUMBER OF DEQ_UID
DEQ_TID VARCHAR2 (30)
NUMBER OF RETRY_COUNT
EXCEPTION_QSCHEMA VARCHAR2 (30)
EXCEPTION_QUEUE VARCHAR2 (30)
NUMBER OF STEP_NO
NUMBER OF RECIPIENT_KEY
DEQUEUE_MSGID RAW (16)
USER_DATA SYSTEM. WF_PAYLOAD_T
SENDER_NAME VARCHAR2 (30)
SENDER_ADDRESS VARCHAR2 (1024)
NUMBER OF SENDER_PROTOCOL
ANYDATA USER_PROP
SQL > alter table APPLSYS. WF_INBOUND_TABLE move TABLESPACE APPS_TS_TX_DATA;
Modified table.
SQL > ALTER TABLE APPLSYS. WF_INBOUND_TABLE MOVE LOB (USER_PROP) STORE DID (TABLESPACE APPS_TS_TX_DATA);
*
ERROR on line 1:
ORA-00904: "USER_PROP": invalid identifieruser600570 wrote:
Well, no matter what the type is be, how to move to this segment?The segment does not move when the corresponding table is moved to new tablespace?
At least that's what I see.SQL> select * from v$version ; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for Solaris: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production SQL> create table t nologging as select * from applsys.wf_inbound_table where 1 = 2 ; Table created. SQL> select dbms_metadata.get_ddl('TABLE','T') from dual ; DBMS_METADATA.GET_DDL('TABLE','T') -------------------------------------------------------------------------------- CREATE TABLE "APPS"."T" ( "Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" NUMBER, "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" NUMBER, "DEQ_TID" VARCHAR2(30), "RETRY_COUNT" NUMBER, "EXCEPTION_QSCHEMA" VARCHAR2(30), "EXCEPTION_QUEUE" VARCHAR2(30), "STEP_NO" NUMBER, "RECIPIENT_KEY" NUMBER, "DEQUEUE_MSGID" RAW(16), "USER_DATA" "SYSTEM"."WF_PAYLOAD_T" , "SENDER_NAME" VARCHAR2(30), "SENDER_ADDRESS" VARCHAR2(1024), "SENDER_PROTOCOL" NUMBER, "USER_PROP" "SYS"."ANYDATA" ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS NOLOGGING STORAGE(INITIAL 40960 NEXT 40960 MINEXTENTS 1 MAXEXTENTS 505 PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "APPLSYSD" OPAQUE TYPE "USER_PROP" STORE AS LOB ( ENABLE STORAGE IN ROW CHUNK 8192 PCTVERSION 10 CACHE STORAGE(INITIAL 40960 NEXT 40960 MINEXTENTS 1 MAXEXTENTS 505 PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)) SQL> select owner, table_name, column_name, segment_name, tablespace_name from dba_lobs 2 where table_name = 'T' ; OWNER TABLE_NAME ------------------------------ ------------------------------ COLUMN_NAME ----------------------------------------------------------------------------------------------------------------------------------- SEGMENT_NAME TABLESPACE_NAME ------------------------------ ------------------------------ APPS T USER_PROP SYS_LOB0000365381C00035$$ APPLSYSD SQL> alter table t move tablespace APPLSYSX ; Table altered. SQL> select dbms_metadata.get_ddl('TABLE','T') from dual ; DBMS_METADATA.GET_DDL('TABLE','T') -------------------------------------------------------------------------------- CREATE TABLE "APPS"."T" ( "Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" NUMBER, "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" NUMBER, "DEQ_TID" VARCHAR2(30), "RETRY_COUNT" NUMBER, "EXCEPTION_QSCHEMA" VARCHAR2(30), "EXCEPTION_QUEUE" VARCHAR2(30), "STEP_NO" NUMBER, "RECIPIENT_KEY" NUMBER, "DEQUEUE_MSGID" RAW(16), "USER_DATA" "SYSTEM"."WF_PAYLOAD_T" , "SENDER_NAME" VARCHAR2(30), "SENDER_ADDRESS" VARCHAR2(1024), "SENDER_PROTOCOL" NUMBER, "USER_PROP" "SYS"."ANYDATA" ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS NOLOGGING STORAGE(INITIAL 40960 NEXT 40960 MINEXTENTS 1 MAXEXTENTS 505 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "APPLSYSX" OPAQUE TYPE "USER_PROP" STORE AS LOB ( ENABLE STORAGE IN ROW CHUNK 8192 PCTVERSION 10 CACHE STORAGE(INITIAL 40960 NEXT 40960 MINEXTENTS 1 MAXEXTENTS 505 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)) SQL> select owner, table_name, column_name, segment_name, tablespace_name from dba_lobs 2 where table_name = 'T' ; OWNER TABLE_NAME ------------------------------ ------------------------------ COLUMN_NAME ----------------------------------------------------------------------------------------------------------------------------------- SEGMENT_NAME TABLESPACE_NAME ------------------------------ ------------------------------ APPS T USER_PROP SYS_LOB0000365381C00035$$ APPLSYSX SQL> drop table t purge ; Table dropped.
If you want to be able to move the segment to a different tablespace to the table, I guess that's not possible. Oracle only allows LOB to be stored in a separate tablespace as the corresponding table provided that they are defined as the LOBs explicitly during the creation of the table, unlike the LOB created by oracle internally because of the column datatype being ANYDATA as in this case.
-
update a table with sequence colmn
how to update a colmn of table with sequence e.x COLMN1 COLMN2 A D RTR XX G how to update colm2 like COLMN1 COLMN2 A 1 D 2 RTR 3 XX 4 G 5
update tab set col2 = rownum; commit;
-
Update the Table with the push button
Hi I want to update my table using the push button that requires a transfer of account
For example a single account transactions into 2nd account
I used this query, but his does not work
Update of cb
Set cb_acc_id =: block3.acc_id_target
where
cb_acc_id =: block3.acc_id_source;
Concerning
Wasim IsmailYou may forgot to validate your update...
BTW:
your form will not recognize, you start a transaction and make an update in the database. -
Update a table with primary key
Hello
I have a table called Temp
CREATE TABLE TEMP ( A VARCHAR2 (50 CHAR), B VARCHAR2 (50 CHAR), C VARCHAR2 (50 CHAR), D VARCHAR2 (18 CHAR), E DATE, F NUMBER, G VARCHAR2 (18 CHAR), H FLOAT );
The primary key is the PRIMARY KEY: (A, B, C, D, E, F, G).
I HAVE THE TEMPORARY TABLE 48052365 COUNTY,
HOWEVER I HAVE A REQUIREMENT TO UPDATE WHERE E (COLUMN) IS WEDNESDAY, THE SAME DAY IN MONDAY (I.E., C - 2 TO EXISTING DATE)
Approach;
I CREATED the TABLE TEMP_WED_TO_MONDAY AND SELECTED ALL THE RECORDINGS ELIGIBLE IN CE AND TABLE AND INDEX UNIQUE CREATED on this SUBJECT. TO UPDATE, I WROTE UNDER ANONYMOUS BLOCK.
Number of Tables: TEMP_WED_TO_MONDAY is 46,921,912 and count of total of the table is 48052365
Anonymous block:
DECLARE CURSOR UPDATE_TEMP_DATE IS SELECT A, B, C, D, E, F, G, E - 2 NEW_E FROM TEMP_WED_TO_MOONDAY; TYPE UPDATE_TEMP_DATE_REC IS RECORD ( A VARCHAR2 (50 CHAR), B VARCHAR2 (50 CHAR), C VARCHAR2 (50 CHAR), D VARCHAR2 (18 CHAR), E DATE, F NUMBER, G VARCHAR2 (50 CHAR), NEW_E DATE ); TYPE UPDATE_TEMP_DATE_TBL_TYPE IS TABLE OF UPDATE_TEMP_DATE_REC; UPDATE_TEMP_DATE_TBL UPDATE_TEMP_DATE_TBL_TYPE; BEGIN OPEN UPDATE_TEMP_DATE; LOOP FETCH UPDATE_TEMP_DATE BULK COLLECT INTO UPDATE_TEMP_DATE_TBL LIMIT 1000000; EXIT WHEN UPDATE_TEMP_DATE_TBL.COUNT = 0; FORALL I IN UPDATE_TEMP_DATE_TBL.FIRST .. UPDATE_TEMP_DATE_TBL.LAST UPDATE TEMP SET E = UPDATE_TEMP_DATE_TBL (I).NEW_E WHERE A = UPDATE_TEMP_DATE_TBL (I).A AND B = UPDATE_TEMP_DATE_TBL (I).B AND C = UPDATE_TEMP_DATE_TBL (I).C AND D = UPDATE_TEMP_DATE_TBL (I).D AND E = UPDATE_TEMP_DATE_TBL (I).E AND F = UPDATE_TEMP_DATE_TBL (I).F AND G = UPDATE_TEMP_DATE_TBL (I).G; COMMIT; END LOOP; CLOSE UPDATE_TEMP_DATE; END;
But for the past 6 hours, it only updated records 20,00,000(Twenty lakh) only. because this update in the table and is also part of the teaching primary key I think it takes time, but pointers to improve/acceleration of the update
Explain the plan:
update statement all_rows (Cost 4) 3 update hr.temp 2 table access by index rowid table hr.temp (Cost 4, Bytes : 64 ,Cardinality 1) 1 index range scan index hr.temp_wed_to_monday (Cost 3: Cardinality 1)
Thank you guys, I would be grateful if someone provides the solution for the scenario, rather than highlight the design. Please understand someone designed to best with whatever the limits it has during this period. (and this isn't me).
-
Update a table with a query that uses the table updated
Hi This is my request. It's a mistake, but I hope that the basic idea may carry out. Cost_before_Decision is a column by using an alter table statement, I added:
Error I get is:UPDATE fraud_nov_14_final SET Cost_before_Decision = (select Cost_Prior from fraud_nov_14_final ff ,(select cla_case_no, sum(case when decline = 1 or decline = 2 THEN (nvl(total_cost_adj_old,0) + nvl(decline_estimate,0)) ELSE Total_Cost END) Cost_Prior from reporting.ci_final@test group by cla_case_no) z where ff.cla_case_no = z.cla_case_no)
Error report:
SQL error: ORA-01427: einreihig subquery returns multiple rows
01427 00000 - "einreihig subquery returns several lines.
Thanks in advance for your help:
Banner:
Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production."
AMT for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionTry this
update fraud_nov_14_final a set cost_before_decision = ( select cost_prior from ( select cla_case_no, sum(case when decline = 1 or decline = 2 then (nvl(total_cost_adj_old,0) + nvl(decline_estimate,0)) else total_cost end) cost_prior from reporting.ci_final@test group by cla_case_no ) b where a.cls_case_no = b.cls_case_no )
-
How can I update this table with values from another table?
Hello
I have a table 'governed '. I want to replace the values in the column "regies.agent" by the value of the column "regies_personnes.id."
As you can see the tables have a column of common values. IE regies.agent = regies_personnes.nom
Table 'governed ':
Insert into 'authorities' (AGENT) values ('Humberdot Alain");
Insert into 'authorities' (AGENT) values ("Danard Patrick");
Table 'regies_personnes ':
Insert into REGIES_PERSONNES (NAME, ID) values ("Humberdot Alain", 1);
Insert into REGIES_PERSONNES (NAME, ID) values ("Danard Patrick", 2);
Before having it
SQL > select agent of authorities;
Humberdot Alain
Patrick Danard
After the update, the result should be
SQL > select agent of authorities;
1
2
Thank you for your kind reply.You can
update regies r set agent = (select id from regies_persones p where r.agent = p.nom) where exists (select id from regies_persones p where r.agent = p.nom)
-
How to update the table when change list item in the classic report
Hello
I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.
My question
1. how to do it in javascript and get the value of the list item and update the table with the new value
2. do I have to use the API to create the list item so I can get the value of the report item or what.
Thank you
AhmedYou can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htmBTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.
-
Update target tables...
Hello
I'm actually in a difficult situation. I need to update a table with a view. The table has 3 columns (* col1, col2, col3 *) initialized as NULLs in all records, noting that the other columns are given inside... So what I'm basically doing is this:
I maps the columns to display in the table and click on the table to display the table operator properties, then set the type of loading for UPDATE. Then under a conditional loading in the filter of the target for the update , I have inserted the following condition:
(INOUTGRP1.*col4 * IS NOT NULL) which shows a successful validation.
Taking into account the constraints Match is chosen to be NO_CONSTRAINTS...
After that I click on col1, col2 and col3 respectively to put the Match column when new line Yes...
Unfortunately, these warnings will appear saying the following:
+ VLD-2753: all mapped attributes are used in corresponding to the criteria of 15_REC.
It will be a meaningless update action if all attributes are mapped are used for matching. The update statement selects rows that meet the condition of correspondence and be updated with the same values. Specify at least one mapped attribute of my_table to use for updating by setting use update for Matching No.: ( COL1 COL2 COL3). +
+ VLD-2761: impossible to generate the Merge statement.
MERGE statement cannot be generated because the COL4 column is used for correspondence and updating. A column can be updated in a merge statement. +
So if anyone has any kind of idea help as soon as possible... Since it is in fact urgent...
Thanks a lot already recognizing in reading.
Hossam"Merge statement cannot be generated because the COL4 column is used for correspondence and updating. A column cannot be updated in a merge statement.
You have to column 4, set the Match column when new line no. and update column Yes?
Concerning
Nico
Maybe you are looking for
-
I have a nice Mac Book Pro of the retina with OSx 10.10.5. Recently, I had a problem with my track disconnect pad. It works normally when starting up, but the cursor can be moved with the external mouse (blue tooth, Mac mouse) after some time. There
-
12.4 composer view breaks track #1 albums.
I finally found the sight of the composer... To see only the first track of some albums was severed in a unique tack album of it own. The tracks weren't like that before 12.4. It occurs under several composers. Suggestions for a way around this?
-
Can not download the update of BIOS for Tecra M5
I am trying to download the giving the Tecra M5 BIOS update.When I click on the download link, I get redirected to another server. My connection doesn't seem to work for this server - is there another place I can download the file from? Thank you.
-
Detection of InsightCM Server service stopped
Hello. Is it possible to get some kind of alarm or notification, if the InsightCM Server service stopped running on the server? It is not something I've experienced, but I just got the issue with the customer, so that I am currently working. Thank yo
-
Windows Update indicates false failed State
I have Windows 7 Ultimate 64-bit and Windows udpate reported the following in the summary page: "updates have been installed: 15/04/2010 at 08:37 (down)." View update history". However, when I discovered the history/details, the update to this date a