Touchpad disconnects

Similar Questions

• Qosmio F50: Fingerprint Reader disconnect by pressing on the area between the touchpad & SPACEBAR

  Hello!

  I got my Qosmio one a week ago and I'm quite happy with it, except a little problem.

  I noticed that while typing or playing a game, I would get random "device" / "device disconnected" sound of windows.
  Keeping the open Device Manager, I discovered it was the fingerprint reader.

  After a little research (and some luck), I noticed that if I press the area between the touchpad and the SPACEBAR just enough to drop the case, the fingerprint reader would disconnect momentarily.

  Anyone else having the same problem?

  I think it was a good decision that you have replaced the unit because based on your description this issue looked like a hardware problem.

  Welcome them

• I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad

  I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad, what should I do?

  Hello Roberto,

  On how to disable the trackpad on a DELL computer, contact DELL.

• Disconnect USB gives the signal of error on the touchpad

  Hi when the connection to my win 7 64 bit computer HP laptop, with my touchpad, it works fine most of the time, but when disconnect, I get an error on touchpad saying something Ouch this device didn't like that. This happens whenever I disconnect the touchpad. I use removal of material safely every time.

  I'm doing something wrong.

  I think that my laptop has 2 x USB 3 and 2 x USB 2.

  any help would be greatly appreciated.

  Ralph :-)

  just saw a solution, I think that, on another post tonight.

  appears instead of right-clicking on material, remove and eject this unit, I have the drive of webOS a click right and choose eject, that seems to work without error, now, thank you.

  :-)

• Disconnect the touchpad on Dell inspiron 1720

  This dell is a good laptop but when the touchpad is still disconnected. The touchpad can be disabled once. If ever, she comes back, you can not

  Turn it off again. Does anyone know how to permanently disable the touchpad?

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Dell - disable or enable the touchpad by using the access key
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=424135&doclang=en&l=en&s=Gen&cs

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I disconnect my mouse I can not use the touchpad with pointer

  POINTER WORKS WITH THE MOUSE.  HOW TO RESTORE THE TOUCH PAD IN ORDER TO EXPLOIT THE POINTER?

  What is the exact make/model of your laptop? Have you checked to see if there is a way to enable it under control panel > mouse

  I hope this helps.

• 'Click' touchpad does not work

  I have a MacBook Pro (retina, mid-2012). The function of 'click' of the touchpad of my laptop stopped working. He always follows the movements of my finger and it makes the right click. I had to plug in a mouse to make it work. I booted the computer in "safe" mode and it works fine, but when I reboot, it stops working again. I disconnected all devices. What should I try next?

  You use a third-party software that modifies the behavior of the trackpad, such as 'BetterTouchTool' or ' MagicPrefs? If so, please, turn it off, then log off or restart the computer and test.

• The touchpad scrolling stops working during the AVG scanning

  I had problems with my touchpad scrolling intermittently does not not in Firefox for everything to doing some time-probably at least a year. I've probably tried all the common fixes without result. I found that if I sign out and then sign back in to Windows, scrolling will work perfectly until AVG antivirus does a scan or an update. It will not work again until disconnect me and reconnect. Firefox is the only application that is affected.

  I am running Windows 7 Home Premium (64 bit) with all current updates on your laptop Gateway ID49C, version FF 27.0.1.

  Thanks for your help!

  Hello!

  I figured out how to stop the break when an AVG scan starts. It seems that it is the AVG scan notification that appears in the bar of tasks that causes scrolling to stop working. When I disabled the taskbar notifications in AVG, the scans run normally and my scroll continues to operate correctly. So, I guess I don't really fix anything, but found a workaround I can live with that.

  Thanks for your help and assistance. If you find a permanent solution, please let me know. Have a great day.

• Satellite T110-107 - Touchpad / mouse problem

  Just had delivery of a new Tosh T110-107, I have to say is beautiful, however a problem. A startup the touchpad works ok, but as soon as I plug the mouse USB may not work - what makes the system unusable until I disconnects me restart and the mouse. So what have I so done for her?

  Uninstalled McAfee and Norton 360 addded and office (two originals) and that's the problem were found until everything has been done - as he came out of the box.

  Win7 Home Premium, never had any problems with Win7, but then not used on a particular laptop model. Can only imagine its software/config but straight out of the box? Tosh must know there is a problem-they have too, but sold it?

  Does anyone else have this problem?

  Answer to Ah my own question, mouse at fault, as soon as the wheel is moved all the works, but we must constantly move or it don't work. It turns out that the mouse was not part of the package, so apologies to Toshiba, but then, that's why I had to buy this machine of large model - deemed manufacturer - if and I would recommend it to anyone who is thinking about buying one.

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

• NB200-10Z - what touchpad driver should I install?

  I have a nb200-10z... and both pilots theres on the download... semantic page touch pad or Alps touch pad? what one do need me?

  Ive had a problem when using the touchpad, it stutters and crashes sometimes for a few seconds during its use... really annoying especially when playing games. He also did something weird when typing... sometimes it will just move the cursor above so I'll carry on typing in the middle of stuff ive already typed! seems to do it on the internet and not on word. How can I fix? I will call toshiba on this subject, if you guys don't know.

  also, he started only to hang on shutdown... every time... He did this whenever my external dvd player usb or any what device as the mp3 is NOT connected... even if I "remove" it and disconnect and then stop it crashes. so, I must leave the usb cable connected to stop correctly. any suggestions on that?

  any ideas on either? It certainly will not be closed properly if a usb device (all) is connected to the USB sleep n load...

• Satelite U920T-100 - touchpad does not work after, sign in

  The touchpad of my U920T-100 satellite works when the lap top is launched upward, but 10 seconds after I connected the touchpad no longer works.

  I tried all the stuff that posted to the FAQ:
  -disconnect all other devices
  -external mouse works, but once it has been cut the Tablet is "dead."
  -Fn + F9 does not work
  -checked touch pad settings: nothing unusual
  -removed and reinstalled touch pad drivers three times: no results, the problem still exists.

  When the lap top is started in safe mode, the touchpad works again (and continues to work), so probably a program blocking the touchpad when the lap top is started normally.

  Don't know where to go from here. Does anyone have a suggestion on how this problem could be solved?

  Thnx & friend,
  René

  *@reineilers*

  The touchpad can be enabled and disabled using the * keys FN + F5 * combination and not Fn + F9 that you have published in your original post above.

  Please try FN + F5 (or just F5) key!
  This enables and disables the touchpad.

• Satellite A200 touchpad function does not properly

  Hello

  I spent a lot of time looking for the solution to my problem, but without effects.

  My touchpad does not work correctly. I mean, I can move the arrow and click on the screen, it's ok. But all other functions (volume, mailbox and other "virtual buttons" don't work)-the so-called "hybrid".
  I am connected to the USB port on the mouse.

  If I disconnect it, there is no change - the touchpad works only in basic mode.
  If I change the double mode in the settings of the touchpad to "always in Dual Mode when an external device is connected" - and all the virtual buttons work.
  But what do I do to make the mode of double the work even if the mouse is not connected (so that the power button works)?

  Thanks for any help,
  M.

  I m a bit confused now and I don t know what exactly you want
  You're talking about the touchpad, mouse USB, bi, etc..

  I put t know what you mean with dual mode and maybe you should give us more information about your operating system.
  And that you use the touch pad or mouse USB?

  Can you post a screenshot screen or something else?

  I put t know if this solves your problem, but have you tried to update the driver for the touchpad? You can find it on the Toshiba site.

• Touchpad pointer freezes Pavilion dm4-2070us

  Everyone has a problem with their touchpad pointer gel randomly? It does not have a lot of time, but it's annoying when it does. When it happens, it's usually when I use Windows Explorer, while moving or deleting files. But it is not limited to this scenario. Restart the portable computer fix it, so as to turn on a wireless mouse. This problem exists since I first used the computer.

  HP Pavilion dv4-2070us

  Windows 7 64 bit Home Premium edition

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below.

  • Disconnect the power adapter from the laptop.
  • Remove the battery from the laptop compartment.
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

  After that, turn on the laptop and install the latest version of the BIOS from here and touchpad drivers from here

• Touchpad can connect to the PC, after the boot USB power and volume-up button top

  My Touchpad can connect through port USB of PC Web - OS is functioning OK, but when I reboot the Touchpad mode USB the PC recognizes it as a "Palm", but cannot load drivers and why it does not appear in 'my computer '.

  You try to run the webOS doctor? This is the first time, or he worked before?

  Here is my help file standard for doctoring a touchpad:

  How to doctor an HP TouchPad (reflash the ROM)
  
  On your Touchpad, make sure you have:
  
  USB cable.
  The battery is charged at least 30%.
  
  Computer:
  
  Windows 7, Windows XP, Windows Vista
  USB port available (not a hub or a secondary port).
  Java 1.5 or later version is installed. If you are not sure what version of Java, you have, or even if Java is installed, go to www.java.com and click the Do I have Java? link to install the latest version of Java.
  210MB of storage space.
  Connection to the Internet.
  
  Various information:
  
  The update process will take about 15 minutes.
  During this process, your device will be unavailable for use.
  
  Download webOS Doctor
  
  Download webOS Doctor on your desktop. If you have a profile of webOS, get it from http://ws.hpwebos.com/webosdoctor/sorry.htm
  
  If not, check the webOS Internals page: http://www.webos-internals.org/wiki/Webos_Doctor_Versions
  
  Prepare your TouchPad update
  
  Hold the Power button for a few seconds until a menu.
  Press on stop to turn your unit off completely.
  
  WebOS Doctor running
  
  Double-click on the downloaded file to start webOS Doctor.
  Follow the directions on the screen until you are prompted to connect your device.
  Select the language that you have selected on your device and click Next.
  Confirm your choice of language.
  Click on accept to accept the terms of use.
  Click Next. webOS Doctor checks your system. BE PATIENT! I saw this part take a few minutes to complete.
  After webOS doctor ends your control system, you will be asked to connect your device.
  
  Connect your device and the finishing of the webOS Doctor update
  
  Connect your device to your computer via the USB cable. You must connect your device directly to your computer, not through a USB hub or other intermediate device.
  Now the tricky part. Hold the Volume Up button on the device and insert the USB cable. After the USB great symbol appears on the screen, release the Volume button upward. If you see the HP logo instead of the large USB symbol, can the Volume Up button is released prematurely. If this happens, wait for your device to start, stop your device and then repeat step 2.
  Windows identifies your component and may offer to install two different drivers.
  When asked to install the drivers of OMAP, choose no not at the moment.
  When asked to install the drivers for Palm Novacom (liner), select Yes, and then leave the drivers to install. This can take some time. Once the drivers have been installed, the next button will become available in webOS Doctor.
  Click Next.
  Do not disconnect your device from the computer during the update process.
  When the reset is complete screen, click done.
  Wait a few minutes for your device to reset.
  You're done!
  
  WyreNut