Update of the repository database grid 10g (10.1.0.4) GC to 10.2.0.5?

Similar Questions

• RMAN and repositories on the same database grid control

  What are the disadvantages of having the RMAN Repository and repository on the same database grid control?
  
  What effect does this have
  
  1. daily maintenance
  
  2. after disaster or high availability... or the recovery scenarios.
  
  3 is server performance with respect to the use of the CPU and memory - not desirable to have two repositories on the same database?
  
  Currently we have not a RMAN or a repository of GC. We intend to implement both. Angle of savings, it would be good if we can just build another data base for two repositories on an existing database server with 2 production databases. The server has enough CPU and RAM face for 1 new database, but that would mean an exaggeration to have 2 new databases.
  
  If it is not advisable to have two repositories on the same database, then we would need strictly two separate databases, in this case, we will need to go to a new database server host two databases, which the org seeks to avoid, as this would mean that to buy a new license.
  
  I tried searching a few books, but don't have no clear guidance on the same. Any opionion would really help. Thank you.
  
  Concerning
  
  S diallo

  Where this instance fails, all rman needs to restore is in the database control file. How to restore a database with rman from the command line, without a catalog. (The backup and Recovery Guide has details of how do.) This will get data back so that you can use the grid again control.

  In order to insure against a default of the machine hosting the instance, verify that the database is in log mode archive and protected with scheduled backups of hot and copy the backup files to another server.

  Other options for high availability, you have a license (Data Guard, RAC) could also be deployed for this instance, if you need more recovery options.

• How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  Unfortunately there is no direct connector for an application of WebWorks to a back-end database. You will need to do, is to have some middleware web server (Apache, Node.js, etc.) who manages a web service that you can make an HTTP request to and GET, POST, UPDATE, DELETE data. Middleware and then transmits commands to the back-end database and returns the results to the finished device.

• ORA-12012: error on auto work "SYSMAN." "' EM_ECM_VCPU_JOB ' in the repository database

  Hello

  I want to install Oracle EM 12 c Cloud Control version 12.1.0.3. I watched the video and I'm just following the instructions.

  I created a repository database using a model of database I downloaded from OTN (database version 11.2.0.3). I chose the data base for the deployment of small.

  Once the repository database has been created, the following error keeps repeating in the database's alert.log file:

  ORA-12012: error on auto work "SYSMAN." "" EM_ECM_VCPU_JOB ".

  ORA-00942: table or view does not exist

  ORA-06512: at "SYSMAN.". EM_ECM_VCPU_COLLECTION', line 1432

  ORA-06512: at line 1

  The installation of the CMS software has not been started.

  In my view, there is a support Note 1570105.1 of ID that addresses the same error in the desk of cloud and is addressed by the application of a patch in the OMS_HOME.

  Someone can help me please answer:

  1) is the question that I feel exactly the same way as in the notes 1570105.1?

  (2) do I proceed with the installation of the WHO and then apply the patch, or is there a way to stop it now, before we continue?

  (3) will be OK to disable just the job in question?

  I think I saw somewhere that the SYSMAN schema should not even be present in the repository database before installation of the WHO; However, this is how he got from the database model.

  Thanks a lot for your help.

  Emilija

  Indeed the footnote you found is good:

  EM 12 c R3: running the reports EM_ECM_VCPU_JOB: ORA-12012: error on auto work "SYSMAN." "" EM_ECM_VCPU_JOB "(Doc ID 1570105.1)

  However, I think it can only occur after the installation of the (12.1.0.3) WHO is an active work that has to do with the VT plugin (to manage and monitor Oracle VM) even if you have not installed this plugin.

  Ora errors after installation of the patch.

  If you do not want to stop the SGD just to install the patch, you can also run the 17066821\17066821\files\sysman\admin\emdrep\sql\core\latest\ecm\ecm_vcpu_computation_pkgbody.sql as user sysman.

  This will recreate the package but now without calling the task if you do not have the plugin installed VT.

  Eric

• Price and tax information is not updated in the repository of the order

  Hi all

  
  

  I just try to perform a check of the stream with all the details and submit the order.

  But it is not updated some details such as price information and taxes in the repository of the order. It's because my command displays incomplete state.

  Help me complete this flow. ?

  
  

  Kind regards

  Leunens jerem

  I used CreateCreditCardFormHandler to store the user provided credit card details, but I think that its not updated in the order object. Because when I'm iteration

  cartmodifierformhandler. Order.paymentgroup and cartmodifierformhandler.order.paymentgroup , it shows all the data.

  Could you please tell me how to upgrade given to the order object CreateCreditCardFormHandler.?

  OOTB CreateCreditFormHandler will create only the payment of credit card group and will not associate the Group of payment order. For this, he must use the method addPaymentGroupToOrder() of the PaymenGroupManager like this:

  getPaymentGroupManager () .addPaymentGroupToOrder (order, creditCardPaymentGroup);

  You can use PaymentGroupFormHandler that takes care to associate PaymentGroups to order using PaymenGroupManager as described above and also manages payments split etc. PaymentGroupFormHandler.handleApplyPaymentGroups () to use when the user has provided payment information to the command and is ready to move on to the next step when ordering.

• Display of updates from the repository in the responses

  Hi, I edited the default repository of paint.rpd and I added in the area HS following the Oracle tutorial. After that I have a query with answers and all worked.
  Now, I removed the domain SH of the Presentation of the repository section, stop and restart the Server Server BI and OC4J but whether in IE and Firefox when I connect to OBIEE and go to the answers, I see still SH in the section area of topic, I also click on refresh metadata link but is no matter what refresh... How I update it? It is a general question, because I do not understand how I can update the metadata to display in web pages OBIEE...
  Thank you!

  I had similar problem and puzzled. I make sure the update of the RPD is copied to the Save loacation as configuration, I stop the server of the OBI and presentation Services. Then I start the server of the OBI, check the log file and make sure the correct repository file is used and all thematic areas are loaded and then start presentation Services. But I still see the old catalog of responses.

  The I got the time way is to delete a catalog of Presemtaion to the sea layer in the Server administration tool (may instead add a dummy catalogue), save it, restart the server, check the log file to ensure that the deleted topic area is not charged. So I can't see the changes. If the old subjects are loaded. I'll reboot the server once more. However, this never happen again. Once I have delete or add a catalogue of presentation. He always had saved correctly.

  I hope someone can share his knowledge/discovery why this frustrating Jules Destrooper happens.

• Update of the repository

  Hello..
  
  I use 10.1.3.4 version obiee
  
  When I update the repository does not reflect in my dashboard page...
  
  Here I changed the calculation of the 'logic' column, but it shows the previous saved calculation.
  
  I stopped the Server BI and BI presentation server services before editing the repository...

  Check in the physical layer tables that you used in the report (physical properties global layer/table / tab-> option cacheable) and check the part of cache in the file NQConfig.ini.

  Concerning
  Goran
  http://108obiee.blogspot.com

• The EBS database grid control

  Hello
  
  This my first time to learn the Grid control.
  Can I used 10g XE for its management of the information of database storage?
  Which is better and easier to manage the platform to install on? It is on windows or linux?
  
  Thank you very much
  
  Samantha L

  Hello

  Yes - See (Note: 568069.1 - How to Verify Application Management Pack Installation?) for more details.

  Kind regards
  Hussein

• problem with update of the repository into account line

  Hello..
  
  I could not update the number of lines in the obiee administration tool while working online.
  I practice the document
  
  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/bi_admin/biadmin.html
  
  I skipped the step
  and I tried following step
  
  Create a new measure
  
  right now I tried click on results.
  
  im getting error
  
  
  ODBC driver returned an error (SQLExecDirectW).
  
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. NQODBC SOL_STATE: HY000 nQSError: 10058 a general error has occurred. nQSError: Oracle 17001: 904 error code, message: ORA-00904: "T168 '. "" CHANNEL_ID ": invalid identifier in the OIC call OCIStmtExecute. nQSError: 17010 prepare the SQL statement failed. (HY000)
  SQL issued: SELECT time. "" Calendar year "saw_0"sales facts. " "" Amount sold "saw_1"sales facts. " "" Unit cost "OF SH ORDER BY saw_0 saw_2
  
  
  
  Thank you

  The error indicates, column "CHANNEL_ID" undetected in DB...

  Try to overlap the DB for this column

  Kind regards
  Rambeau

• Upgrading repository database for the grid control 10205

  Hello
  
  I have the following problem: we took the grid control 10205. It was an upgrade of 10203. By default, it runs a repository 10104. Now I have to spend this repository to 10205 version too. I need to do because this grid control runs on ELinux 4 and we want to improve this ELinux 5 machine, but in the database of ELinix 5 10105 Certification Matrix only is not supported.
  
  Now my question:
  
  To perform this upgrade, I've read that I must first install Database 10205 Software in a separate House and then upgrade the database with the repository. CMS and the repository database are installed in separate houses. Are these references in OMS to host the repository? What should I do after I upgraded the database repository?
  
  Unfortunately I'm not able to find something about this in the Documentation. Everyone speaks of upgrade of WHO and almost nothing on the database repository.
  
  I'd appreciate a lot of the advice.

  Salvation;

  Have you checked the following note:

  How to level a 10.1.0.X or a repository database for Grid Control 10.2.0.4/5 10.2.0.X to a Version 11.1.0.X database [399520.1 ID]

  Respect of
  HELIOS

• The Clonnig oem repository database and restore to another machine.

  Hi all
  
  I installed oem grid control and created the repository database using existing database option to 10.2.0.2 and upgraded to 10.0.3 control grid oem for windows and now I want to move my repository database to another machine, IE clone this database to a different server and use it. is it possible if yes how and what chages in the configuration files to point to the database and new macine.
  What are the steps needed to do so.
  
  Thank you
  
  Gesner.

  I moved successfully a network to another host control repository, this is possible. I stop WHO and the repository database. Moved the database to the new host then updated all the AMT etc. settings for the database at its new location, the AMT settings in the emoms.properties of SGD configuration file and change the line oracle.sysman.eml.mntr.emdRepConnectDescriptor to the location of repoisotory.

• The Repository Maven Oracle ADF 12.2.1 update

  Hello

  will there be an update of the Repository Maven Oracle with ADF 12.2.1 libraries?

  If yes - that someone can say when it will be available.

  Well, there is no need to open multiple threads on the same topic, just to bump existing thread.

  Anyway, only Oracle employees may have this information so your best chance is to create the Service Request(if you have support account).

  But don't expect much, Oracle policy is to withhold the release date for their products.

  Dario

• Planning level 11.1.2.1 in 11.1.2.3.5 - updating of the database is not updated every custom on some Member attributes

  Us are currently working on improving our environment to 11.1.2.1 11.1.2.3.5, but have you encountered a problem with one of our applications, and only on one of the cubes in the application. When we perform a refresh of the planning database, it initially stripped of some members of the attributes, custom and is now refusing (Finally, not directly) to update on that specific cube. The other cubes in the same application, I can see the custom attributes, update correctly.

  The cube itself is not locked on the side of essbase, prevents the updates and the updating of the database of planning indicates he managed. I spent reviewing the essbase application log and planning0 journal, noting none of which seems to indicate a problem with the refresh or out of the ordinary.

  I am able to edit the cube directly via EAS and on the updating of the database, the changes are deleted (if I add an attribute) or the Member is restored (if I remove the Member), but still, no custom attributes.

  It is unfortunately the case at some 700 members of 5,000 members in one of our dimensions and only in a cube so that a single application, but we hit an obstacle for what might be the cause. What is happening in the our QA Dev environments, but I expect that since one is one migration on the other. Step moved to production yet because this (among a few other things) continues our implementation.

  If anyone can lend a thought on what could be the cause or the paths to understand where we can't look to fix this? I definitely appreciate all the help that can be done.

  Thank you

  Jonathan

  A solution to the problem, but not sure about the cause. By deletng the cube that has problems and performing a database update subsequently, we are now able to see the cube with the appropriate attributes. It would seem that we had problems with our cube Essbase itself rather than on the side of planning.

  My suspicion is that it might have been caused by our Essbase upgrade are out of sync from the upgrade of planning during the updating of the original database after the start of the process to upgrade (11.1.2.3.5 for planning vs 11.1.2.3 for Essbase). While I am not sure of the cause, I am sure the solution so feeling good go ahead now.

  John - I appreciate all the help and insight along the way, as it has helped us reach this point of the solution.

  Thank you

  Jonathan

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• Repository of grid control

  How to find what database is to have the repository of the grid control?
  I have a SAFLO1 server on which there are about 20 cases of database running.
  I know the Home Agent, but not able to find the repository database.

  Look for the file:
  $OMS_HOME\sysman\config\emoms.properties

  Where you can find this line:

  oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=hostconnect)(PORT\=1521)))(CONNECT_DATA\=(SID\=SID)))
  

  SID = name of your database from the Rep.

  Im sure it is a better way to do it, maybe not. :)