Update of Windows Vista Sp1

Similar Questions

• Update of Windows Vista SP1 error 8024200d

  Original title:

  SP1 update

  I try a Windows Vista Service Pack 1 update.  The update maintains have failed, error code is 8024200d? \

  Thanks, Judy

  Hello

  Thanks for giving an opportunity to help you with your concern for Windows to Microsoft Community!

  Method 1:

  You can consult the following before link install Windows Vista Service Pack 1.

  What you need to know before installing Windows Vista Service Pack 1

  http://support.Microsoft.com/kb/936330

  Method 2:

  You can check out the following link and check:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Method 3:

  You can try to download the update from the following link and then try to install it manually.

  Windows Vista Service Pack 1 five language standalone (KB936330)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  See also:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  It will be useful.

  If the problem persists, or you need help on Windows please keep us informed.
  We will be happy to help you!

• SP2 update for Windows Vista SP1 Ultimate (x 64) Edition

  Just downloaded SP2 for Windows Vista Ultimate Edition (x 64) SP1 update.  Once the installation is finished, restarted the PC.  PC won't start windows?  Windows repair attempts, no luck.  During startup, stop at "78006/81420 (\Registry\machine\Schema\ wcn://Morcropsoft-windows-Microsof...).

  Hello

  Follow these steps:

  Step 1:

  Perform the system restore from safe mode to a restore point before the show.

  See also boot your computer in safe mode

  System Restore: frequently asked questions

  Step 2:

  Follow the steps in troubleshooting these items to troubleshoot problems when you install the Service Pack 2 (SP2):

  Learn how to install Windows Vista Service Pack 2 (SP2)

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

• update of windows vista sp1 to sp2 problem

  AFTER THE UPGRADE OF VISTA SP1 TO SP2 I FOUND THAT IT DIDN'T THERE HAS NO SOUND OUTPUT ALTHOUGH MY SPEAKERS WORK WELL... WHAT DO?

  
  

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Repeated installation of Windows Vista SP1 in Windows Update and fake notification of successful Installation.

  I was using Windows Vista Home Basic 32 bit OS in my Dell Inspiron 1501. The operating system is preinstalled and Windows Update updated to SP2. But recently an unknown problem has occurred and my laptop cannot connect to the internet. As no reason was found, experts have advised the reinstallation of Windows Vista. I reinstalled Vista by running the operating system provided by Dell with my laptop DVD. The laptop started to connect to the internet normally.

  I started to receive an update to Windows Vista SP1. I installed it. Installation has suddenly didn't have that about five minutes and the computer also has not restarted several times on its own as expected. At the end of the Windows Update notification "Update" successful installation Update history shows also succeed installing SP1. However, I am receiving the same updated daily and installed in exactly in the same way with the same result. After installation, the Windows version does not display Windows Vista Home Basic SP1 but only Windows Vista Home Basic. What should I do?

  I had the same problem and it really irritated me. Even when you install SP1, and he says there are successful (takes like 1 sec inst) and you click on updates search is there once again. He said in the story who is has been installed, but is not there, when I tried to install SP2 maually it is said first install SP1, and then I tried to manually install SP1 and it says that I have already. But if you go to start > right click on 'computer' > properties it does not say you have SP1. So here's what I just did and now it worked and SP2 as well.

  When you click on the support link that he gave u get the ability to run a thing 'fixit '. That run. And it still didn't work. (read everything in the support page) Then I went on this link and ran the virus Hunter MS. Nothing was found, problem still there. so I ran again the file 'fixit '. (twice he said them that something was fixed.) then I restart my computer and tried to install the SP1 Setup again and it worked perfectly :) then SP2 and it worked as well manually. and he has actally took like an hour to install. maybe try, worked for me. lol, don't know what measures was unnecessary, but it worked. You can download the SP to install it manually, simply google "manually install SP1/2 for vista" or something and download it.
  Sorry for the bad grammar/spelling. In a hurry, lol. I hope that you manage!
  (if the link does not IE - http://www.microsoft.com/security/scanner/ )

• My computer will not download windows vista sp1

  I tried the update of windows vista sp1, and it continues to fail. I even tried manually upgrade and still nothing. I recently bought an external hard drive and I thought that I formatted it to my pc and mac. Well my pc does not recognize it because sp1 is not installed. I can't yet do a clean restore and download windows vista because I don't have the CD. Is there anything I can do to receive sp1. I see that many people have had this problem.

  Hello

  How have you tried to manually install SP1?

  SP1, SP2, and then should be installed years ago

  ___________________________________________________________

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, IF it is still available.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Uunable update of Windows Vista. Error code 80070005

  I'm unable to update Windows Vista SP1 to SP2, I get the error code 80070005. ERROR_ACCESS_DENIED.

  Help, please...

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates for Windows Vista Ultimate.

  I have Windows Vista Ultimate Edition. When I got the machine, I installed the latest updates for Windows Vista. This caused a problem with the license and told me to ignore the updates for Windows Vista to avoid the problem again. Is this still the case and, if so, why does Windows Update not recognize that I have 'Ultimate' and stop of asking me to install more than 50 updates every time I turn on the machine?

  He was the one who told me that the problem was that I shouldn't download updated Vista because I had Vista Ultimate.

  Nonsense. It is VERY important to install all updates offered by Windows Update Service Packs and critical security.

  There will come a time soon when your computer will not be offered more updates at least that Vista SP1 is installed. A few years later, the same thing apply to Vista SP2.

  Your computer is subject to countless vulnerabilities in its current state. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Keep due to lack of updates of Windows Vista Edition Home Premium

  I have Windows Vista Home Premium SP1, and it is configured to search for and install updates automatically. I recently had to change this setting if the manual I received an update on the last update failure message try.

  The computer attempts to download the following updates: update for windows vista for x 64 (KB970653), updat to .net framework 3.5 systems service pack 1 for Wizard framework .net 1.0 x 64 (KB963707), update for internet compatibility view list explore 8 for windows vista for x 64-based systems (KB973874), update for windows vista for systems x 64 (KB972036) and update for windows vista for systems x 64 (KB973879).

  I called Costco to help (because that's where I bought the computer) and all they can tell me is not install updates. I'm afraid that one or all updates can be important for the computer, and not their update will put my machine at risk.

  Does anyone have an idea to solve this problem?

  Thank you

  Hello

  The problem is KB973879

  Difficulty here towards the end of the thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d

  Rob - bicycle - Mark Twain said it is good.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.