Change the kernel settings after 10g Software Installation

Similar Questions

• Changing the unexpected settings after update

  HI - George here in Rhode Island.

  I have Windows 7 Ultimate 64 bit and whenever I do a "reboot" or (I think) an update causes a reboot; my 'games' (hearts + Spider Solitaire) revert to the default settings. The "Display-bubble" option is checked and all the names of the other players return to the "North-South and West. No other user profile settings are changed.

  I know that this is a trivial question, but it's driving me crazy! I found a reference to this line that suggested Roxio Creator may be the cause, but removal of Roxio did not fix the issue. I tried to reinstall the operating system without success. The only thing I found which may relate is an error in Event Viewer

  -
  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  27991

  System

  GW - PC

  -

  SessionLauncher

  %%d Ko

  Links on the error '0 x 8080000000000000' do not seem to help.

  Any help or information would be appreciated.

  Thank you

  Hello
  Method 1:
  Perform the clean boot and check.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See the section step 7 above to start the computer by using normal startup after you have performed the steps in troubleshooting.
  Method 2:
  Method 2:
  Scan a file system (CFS) checker on your computer and see if that fixes the problem.
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  Method 3:
  I suggest to create a new user account and see if the problem still occurs, follow the link:
  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix the damaged user account following the link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  
  

  I hope this helps.

• Change the import settings when the Tag window is disabled

  Hello

  When changing the parameters to import by mistake, I chose only not to ask for the name of tag in import.

  Now, I want to change the import settings. Now, when I click on import Image and videos I'm never able to see the screen of tag I can change the settings to import again. It begins to import images and videos very quickly and not giving the time similarly hit the import settings.

  Any help would be appreciated.

  Thank you

  
  

  I found a solution that worked for me!

  My problem was when I tried to change the import settings after inserting my memory of cameras
  stick. It offering me the opportunity to go to import the settings. If I could change the location
  imported illustrations...

  After scanning a document to save (nothing to do with) image + video import dialogue box shows
  To the top! And does not immediately start importing, so I was able to click on the import settings and get
  the dialog box import settings.

  I clicked on the parameter area for the scanner and I get a choice of devices to change the settings of.
  Cameras and portable is here. !! By clicking on that gives me the window I can ck the __Prompt of the box for a tag on import.
  I do this press 'OK '.

  Then I get a box of photos and videos to import saying for these changes to take effect, import pictures and
  videos will now be restarted. Click on 'OK' to find
  Scanner: Operation is not successful the device is not ready. I click 'OK' on this box

  After that, I will go back to load pictures from my camera memory stick and import of images + videos box
  remains on the screen, so I'm able to get import settings.

  I hope this works for you... I tried to solve this problem for weeks.
  (Meaning 3 days after I got my new computer windows7)
  with no help from chat for hours with HP support and many requests for help from microsoft answers.

  Hope that gives you the answers you need... I would like to know if this is the case?

  Wes

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• Need help to change the admin settings

  I bought a used dell optiplex 755 from a local community college and need to change the admin settings so I can download the programs and files because it deletes every time on restart.

  Do you a big favor and restore the computer to its factory settings.

  See: http://www.dell.com/support/Article/us/en/19/SLN291879/EN

  If for any reason that does not work (for example, the school removed Dell 'restoration' software), go to the Community College of the it Department and ask them nicely to restore the computer to a functional State.

  NB: If after restoring to factory State, you have any software "free trial" - any software particularly virus - be sure to uninstall.  The free trial period will have expired for a long time and the presence of antivirus software, even if idle, can cause a lot of problems.  Most of the antivirus software requires special removal tools provided for free by the Publisher of the antivirus software.  For example:

  https://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

• When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

  Hello

  When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

  (Note I recently installed DivX player / converter / movies.. .is this the cause?)

  Then... on desktop... .double click on Mozilla... .loads ok
  Open a new tab..it loads Bing! & I hate it!

  Ive tried;

  1.Tools - options - addons - extensions & plugins - cant see anything there?
  2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
  3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
  4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
  5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
  
  browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
  
  - rightclick on the selection and type 'reset' IT WONT CHANGE
  
  please can you help me?
  

  Thank you

  Stuart

  I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.

• Satellite 2060cds: what I need to do to change the BIOS settings?

  I need help.
  I installed Windows XP Home, and now I can not access the toshiba hwsetup software, to change the password or other settings of the bios.
  What should I do to change the bios settings?

  Thanks for your help.

  Hi Paulo,

  Normal access to the BIOS Setup is by pressing F2 during the initial power of sequence.

  Kind regards

• Photosmart b209a more: how to change the network settings?

  I have this printer on a wireless network connection. In a few weeks will change my broadband service, which is to get a new router. Is there an easy way to change the network settings for this printer to connect to the new router, without having to reinstall the printer software?

  Here's what you need, your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-plus-all-in-one-printer-series---B2/3777155/model/3777156/drivers

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• Cannot rip CDs or change the rip settings

  I can't "rip CD" or change the settings of "rip".  When I try to copy a CD I hit the rip button and I get the error message "CAN'T RIP ONE or MORE SONGS on this CD".  I tried several cd.  When I try to change the RIP SETTINGS I get the error message 'THE SETTING for RIPPING MUSIC COULD NOT BE APPLIED'.  I tried to uninstall and reinstall WMP12 but when I put the APPWIZ. CPL is not listed.  I don't know what else to do.  Please help me as soon as possible, I need to update my IPOD.

  In WMP library, click organize , and then select manage libraries - music . What places are? If there is no available location, remove them and also make sure that a default save location is set. Do the same for the other libraries (videos, pictures, and Recorded TV).

  If this does not help, open Windows Explorer, right-click the music library, select Properties and click on restore by default . After that, make sure that a backup location is defined (as indicated by a check mark).

  Tim Baets
  http://www.BM-productions.TK

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• Pe11 - do not change the project settings based on the video source

  I keep the light in various places PE11 should read my video source and change the project settings for the game when I place it in the timeline in Expert mode, but I don't see any indication that this is happening. No matter what kind of video, I add, the editing mode (and other settings) in the settings of the project remains the same.

  I'm working with older clips (smaller than 720 x 480, 25 fps), and none of the presets project apply.

  What if the project setting does not match what I'm getting? Or it is made irrelevant by the publication settings I use (assuming I choose good here)?

  Thank you

  Dave

  As you have seen, WMVs will not change your project settings. In fact, I'd like to discourage you by their use as source files.

  WMVs are a good video source you change in Windows MovieMaker - but they make for a source file bad enough for virtually any other video editing software.

• SP A10 - using the BIOS to change the graphic settings

  Hi all

  How do you change the graphics settings on an A10 SP from 16 MB to 64 MB? I guess this is done in the Bios but I can't seem to enter the just did F2 key appear the boot options.

  Aid is graetly appreciated.

  Hello

  Please use the ESC key to enter the BIOS settings.
  You should see the option to increase the shared graphics memory.

• How to change the language settings in firefox using JavaScript

  My question is: how to change the language settings in the use of JavaScript in firefox:

  I want to set the value of intl.accept_languages en using JavaScript.

  How can I do?

  EDIT: The reason mail, I want to do is to be able to run selenium for different languages test scenarios with manually change them rather progrmmetically

  You will need to close and open the pref via user.js or prefs.js before restarting Firefox to perform the next test.

  See:

  • http://KB.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
  • http://KB.mozillazine.org/user.js_file