Update separately the two regions of report

How to put two regions-by-side report

Hello

Made for you!

What I did:

1 change the region used to keep to the point of the display "Page body 2" model.
2 - change region of availability in column 2

Take a look and see if it's what you want.

Kind regards
Martin

What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

(1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

Thank you

Dave

Hi David,

I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

Kind regards

Jason D

Technical sales engineer

National Instruments

Update on the table by extracting the data from the table even under certain conditions

Hi Experts,

I have the table EMP which currently has 6 entries.

EMP_SYS BATCH_NO JOIN_DATE LOGIN_ID STATUS FLAG

1 FEBRUARY 10 PROD 84 Y IND123 ABC

DEV 1-23 APRIL 98 Y IND123 ABC

2 12 APRIL PROD 98 Y IND123 ABC

2 2 APRIL DEV 98 Y IND123 ABC

3 13 APRIL PROD 98 Y IND123 ABC

3 3 APRIL DEV 98 Y IND123 ABC

CONDITION: I need to take lines which has the minimum BATCH_NO for each of the EMP_SYS

for example,.

1 FEBRUARY 10 PROD 84 Y IND123 ABC

DEV 1-23 APRIL 98 Y IND123 ABC

For the above two lines, I need to update the status of DEF. How to select this criterion and update in the same query?

Currently, I used the query to select the minimum BATCH_NO for each of the EMP_SYS below.

SELECT EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS

Of

(

EMP_SYS, BATCH_NO, JOIN_DATE, FLAG, LOGIN_ID, STATUS, SELECT ROW_NUMBER)

COURSE NR (PARTITION BY ORDER OF EMP_SYS OF EMP_SYS)

FROM EMP

WHEN STATUS = 'ABC' AND FLAG = "Y".

)

WHERE

NR = 1;

If I try to use the update on the above query statement... It updates every 6 rows instead of 2 rows.

Please suggest me a way to update only the two lines that has the minimum BATCH_NO for each of the EMP_SYS.

But is possible to write the query without using the Group of?

Update e EMP

set STATUS = "DEF".

where BATCH_NO = (select min (BATCH_NO) from EMP I where STATUS = 'ABC' AND FLAG = 'Y' and i.emp_sys = e.emp_sys)

update with the instruction box

Hello

I need to do something like this:

update my_table set (prelucrat, err) = (select case
                                                         when r.id is not null then
                                                           ('D', null)
                                                         else
                                                           ('N', 'Nu exista persoana cu marca '||r.marca)
                                                       )
where marca = r.marca and ctiserver = r.ctiserver

But I got an error 'missing right parenthesis.

'r' is a cursor variable, so this update is nested in one 'for r in (...) ". loop. "

What I am doing wrong? Is it possible to update both the two columns, then select in this use case?

Thank you.

for r in loop (select...)

Update my_table

Set prelucrat = nvl2(r.id,'D','N')

, err = nvl2 (r.id, null, 'Nu exista person cu marca' | r.marca)

where marca = r.marca

and ctiserver = r.ctiserver;

end loop;

----

Ramin Hashimzade

Call taskflow even twice with different parameters - as two regions in JSFF

Try to select * 'No controller Transaction' * and
Uncheck the options
(1) share data with calling taskflow controls
(2) no savapoint on the entry of work flow

Thank you
Nini

Update the two reports

Hello

the request-response model seems to be OK. Firebug, I see three applications

1. POST http://globocenter.by/apex/wwv_flow.show

This request shall submit research, the two values done right. It triggers your AJAX actions.

2. POST http://globocenter.by/apex/f

This request argued the updating of the region of Report2 (id R11443604808899863120). The response contains the HTML of the report, including the straight section ("report_R11443604808899863120").

3. POST http://globocenter.by/apex/f

This similar application submits the updating of the area of Report1 (id R11441642207457758699). The response contains the HTML of the report, including the straight section ("report_R11441642207457758699")

-Udo

Variable setting wrong with dynamic action for the region of report

Hello

I can't setting a variable. Here are the details of connection:

Connection information:

TCARMY workspace

User Apex_dev

Password dev_apex

Application 88542

Page 11

If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.

The modal window should popup and run the sql at that time with the variable data and view the two columns. And if the user clicks on the second row, it would display the data in the row.

Thank you

Tim

TC-army wrote:

If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.

What has not been set up right, it's that the element of P11_NAICNUMD parameter was not specified in the source attribute of Page to go to the region, modal Discount. The current value in the browser page, therefore, was not defined in session state when the report has been updated by the dynamic action. When

Need to update to the DVD store and want to make it region free

Hello world

It could be a matter of 'stupid' for advanced users... I'm actually looking for updates. It seems that I need to know the name of my dvd storage. Can someone please tell me how, I will this knowledge?

I of course found a name (storage, disk management), but it's a very long and nothing appears on this name, it seems to be the only evil I found...

Second question: I bought my laptop in Switzerland, but living in Uruguay. So we often expect dvd of the two lands, Spanis, English and German, and there are also codes of the different regions. Now, I used all my code changes. What can I do? Can I buy a second storage disk (sorry, not sure about the name...), an external and watch movies with code 4 in this one, movies with 1 in the internal code? It is quiet sad to be forced to watch just a certain region code movies...

I'd be happy to help. A large Sun * thank you * to the beach of the Uruguay :-)

Manuela

I don't know if you know but all readers of DVD from different manufacturers support this latch area of the DVD.
This option appears not only on Toshiba laptops, but on all computers with DVD players.
The fact is that it is not possible to remove this lock of DVD region one road legal. You can change 5 times only, but then the dvd player should be locked.

Of course, I found these programs that could remove it but I've never tested.
In my opinion these cracks don't work and it s really risky to do that because you may damage the firmware of CD/DVD players.

I don't know exactly why develop manufacturers of discs discs with this feature, but the fact is that there are on the disc and you cannot remove it.

By the way; I found this useful discussion:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=109578𚰊

There is an explanation why you can't remove DVD region release:

+ The commercial DVD player specification requires that a player to be sold in a given location should not play discs encoded for a different region (region 0 discs are not restricted). The purpose of this system is to allow motion picture studios to control the various aspects of a release (including content, date and in particular, price) depending on the region. In the practice of many DVD players are or can be changed to be multi-region, allowing playback of all discs. Entirely independent of encryption Content Scramble System (CSS), region coding pertains to regional lockout, which originated in the video game industry. +

Good bye