update stops when copying AcroPDF.dll

Similar Questions

• Automatic update stop when between tabs

  Hello
  
  I have several tabs with a report on each tab actually reports to refresh to "no line" every time that we have tabs. I wish that reports to refresh only when we click a button 'Go '. How can I do?
  
  Thank you.

  Our greatest pleasure. Feel free to give points for useful and comprehensive and mark the answer to the question.

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• My commputer won't allow updates. When I try the blue bar just continues to run. I tried to run Powershell, but it stops and says error has occurred.

  Original title: Powershell

  My commputer won't allow updates.  When I try the blue bar just continues to run.  I tried to run Powershell, but it stops and says error has occurred.  What should I do

  Hello

  1 - what you mean that you can not install Windows Update? If Yes, then the updates?

  2 are. what Powershell you referring?

  3. you receive an error message? If so, then post back the exact error message.

  Answering these questions that could help us help you better. The following article could be useful if you are referring to the Windows updates.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Media Center has stopped to recover data when copying music CDs

  Vista Media Center is used to retrieve metadata about the Web when I ripped the music from the CD. Now, he says just unknown to the two album, song, artist, etc..  I tried to rerun the installation program - which did not help. The option to download when copying is enabled. Now what?

  Hello

  I suggest you try to disable the firewall and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Plant system Windows Explorer when copying or moving files: error explore 0xc000012d

  Windows Explorer crashes XP Home (laptop) system when copying or moving files that gives the error message: explore 0xc000012d.  Text and images suddenly begins to disappear from the screen (go faster if you move the mouse on the screen!), system crashes, gives the blue screen and stops. No time to save data, which is happening so fast.  I lose all data in open programs.  RAM is tested without error, ATI Mobility Radeon X 1300 driver has been updated, system fully updated, but nothing is. Could not find any information on the MS Support or on the web that would help.  Please help - tired system crash all the time!

  Pippuri,

  Try to disable the fast user switching and see if that helps.

  Go to control panel, double-click user accounts, and then change the way users log on and outside. Should be a checkbox to turn on fast user switching.

  Let us know if it works. Thank you.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Automatic product update always XUL files. DLL deleted by Norton AV, resulting in death Ffox, the only solution is to use IE to reinstall Norton OK with XUL from Mozilla. DLL here

  Each time Firefox auto-updated runs Norton360 detects a virus in the file update xul.dll (virus is identified as: Suspicious.Cloud.9.B a heuristic virus) and removes the file "Mozilla firefox/getting updated. When Firefox tries to restart it inevitably crashes. I then load another browser to download Firefox on the Mozilla site. This version (supposed to be identical to the version used by auto-update) install without complaining of Norton360 (Note: Firefox keeps its previous settings OK).
  1. is there a difference between the two versions of xul.dll?
  2 xul.dll file contains a virus?
  and
  3. How can I get an auto-update to work the first time?

  I have lived this error condition for several recent updates of FireFox (38.0.5 Funnelcake June 2015 Mozilla 1.0 - 39). My security system is provided by Comcast Norton Security Suite ver 22.5.2.15, on a Win XP installation. Now when we announce an automatic update of FireFox, I avoid this error by 1) disabling NSS Auto Protect, 2) installation of the latest update of FireFox 3.) Re-activation NSS Auto Protect. There is no warning message and the update FireFox works unremarkably.

• Why Firefox 32.0 keep invites me to put up-to-date, then failing to go beyond the ' connection to update server "when I click on the button 'update now '?

  Sometimes with annoying frequency. The new facility of 32.0 is barely a month, but it happened a few days later. I left the window update run for 20 minutes. Nothing, never. Apparently it will never truly connect you. Nor will it update automatically when I click on the line 'About' on the drop-down list in the Firefox menu bar.

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 32.0.3: https://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Re: Satellite Pro U400-160 - freezes when copying larger files or videos

  Hello:

  I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

  If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

  Thanks in advance.

  Hello

  Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

  Anyway, you have installed all the updates of Windows for Vista?
  In addition, you should test another external HARD disk or with another cable.

  Welcome them

• HP: Laptop randomly stops when it hits 15%

  He started only today. My laptop would randomly just turned off when the battery was low. When I checked the percentage it shows 15% when I turn on my laptop. I already checked power options, and everything is normal. I was wondering if anyone has solutions to this. In addition, I notice just that my phone would not charge from 90 percent. It would charge up to 90%. Thanks in advance.

  Hi @davevidduong,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your laptop randomly stops when the battery is low. It will be a pleasure to help you here.

  A remarkable work has been done by checking the power options. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  For clarity, I would need more information to help you best.

  Please let me know the product # computer.

  Have you checked if it stops when the charger is connected?

  This could be a hardware problem with the battery and we need to insulate it properly. In the meantime, please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Then visit this link to update the bios and HP support assistant. Link: http://hp.com/drivers please select the country and follow the on-screen instructions. Once this please visit this link to run hardware diagnostics on the battery and other components. Link: http://support.hp.com/in-en/document/c03467259 if please run full diagnostics and note any failure code if a component fails. Mainly to run diagnostics on the battery. According to the information that you could later calibrate the battery.

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please let me know how it goes. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye

• Qosmio F10 stops when I touch

  Hello world

  Since yesterday I have a problem with my F10.
  It is quite paranormal, so I give you the facts.
  -l' computer stops when I touch (when I close the screen, or touch down on the left)
  -After that, power light movies with this schema:
  1 long (white) 6 (white) shorts and 1 long x
  -to shut up again, I have to remove the battery and power, wait a bit, and it can be silent again.
  I have no software, no update, and it looks like a motherboard problem...
  Naturally, it is not under warranty more...
  So, if you have answers!
  Thank you to
  Eric

  Hi Eric

  If the DC In lamp sends a blink code it is probably a problem of electronic supply on the main map. Unfortunately, there is nothing to see. You must contact the partner of service authorized in your country.

  Good luck!

• can someone tell me why I can't update to El Capitan 10.11.2? the line "Show details" gets up and I click on it to make the update. When I do this, it just goes back to doing nothing, so I can never get past this point.

  can someone tell me why I can't update to El Capitan 10.11.2?

  When I try to update "updates available have changed" guest shows up.i click "Show details" prompt to complete the update and when I do that, it just goes back to doing nothing, so I can never get past this point. can someone help me with this, please?

  Thank you very much.

  In some cases, this error message is caused by a problem in the network. Restart your router as your device at wide band, if they are separated. If there is no change, see below.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.