Update the current values in the popup

Similar Questions

• Refresh the popup programmatically

  Hello

  I use Jdev 11.1.1.6

  I have a FA: table in a popup that is to pick up a few lines... I added a link delete next to each line through links.

  When I click on the link delete for a particular line... the line is removed and the window closes automatically.

  To avoid this, I put the part delivery of property = true for the link delete...

  Now when you click on remove link line gets deleted but context does not close which is very good...

  Now the problem is... the other buttons on the pop-up window are not working as record, etc...

  I like to write code for the link delete where by program I will delete the line and I want to update the popup as well.

  Can someone let me know what is the code to update the popup programmatically?

  Thank you

  Rajesh.

  User, things to check:

  is the autoCancel property for the popup?

  If so, set it to false and try to delete a line without defining the partial submission button.

  Timo

• Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

  Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

  Hello

  Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 3 :

  Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Help! Try to update the values of Member - but does not (completely).

  We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.

  Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").

  The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.

  Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?

  relatively small cube BSO, Account (dense).

  Here is the rule of this task running

  SET CACHE HIGH;

  FIX (& those 'Forecasts', 'the current iteration","F_00000");

  "56400")

  IF (@ISMBR (& NextMonth: "Dec"));

  0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");

  ENDIF ;)

  ENDFIX;

  -followed by a calc all

  I expect to update all occurrences 56400 in the fix above...

  Thanks in advance!

  Himanshu-

  You probably need...

  UPDATECALC OFF SET;

  .. Smart calc or .in there will prevent 'own' blocks to be recalculated.

• ExportCollectionAction causes the current values of lines to be copied into the first row of the table

  Greetings experts,

  I use JDev 11.1.2.3

  I am faced with a really strange behavior of the exportCollectionActionListener. I have a table for each row in this table, a link that calls a popUp. This popUp tells the story of this selected save changes (means it displays data from a different table/VO, who keeps a history of the first) in a table. I have a button that calls the exportCollection for this second table. When I press on it, an excel file is generated and downloaded and everything is perfect until now. If there was not any which record in this table, and o back to the first, by pressing the button send is not track all changes. But if there where all records from this table of history (always talking about the history of the current line), go back to the first and press on submit, that the very first line of the table of fir trees, gets all of it's values as the last row of the second table, as it is copied from one to the other. I have to press on restore back to normal (note that the popUp has it's CancelListener to call a restore of a bean to support operation).

  Why is this happening?

  Thanks in advance

  I found a work around for this problem.

  I added the code that causes the whole view Refresh (ie: the whole page), the popUp cancelListener, also I changed the commandLink partialSubmit property and set it to true. It's not like totally cool watching the screen charge for this fragment of a second after the closure of the pop-up window, but it not the drill.

• Update the values in the Table from another Table containing historical data

  So, I have two tables, a table and a master table.  The current table is updated each week and at the end of the week, is copied to the main table to keep historical data.  I have update the table in progress early in the week and want to take the latest data from the master table and update the current table with the data.  The current table could have additional IDs or some of the IDS could have deposited (these lines would receive data in the main table).  I want to only update the rows in the current table that have existing data to the attr1, attr2, attr3 columns.  A particular ID may have more than one record in the primary table, I want only the last disk to use for updating the current table.  The data from a different database where no direct connection is possible then I have to import data every week.  Here are some statements of create/insert:

  create table current_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
  

  create table Master_T (ID1 varchar(100),adate date,attr1 varchar(100),attr2 varchar(100),attr3 varchar(100))
  
  

  begin
  insert into current_T (ID1,adate)
  values ('IE111','08/02/13');
  insert into current_T (ID1,adate)
  values ('IE112','08/02/13');
  insert into current_T (ID1,adate)
  values ('IE113','08/02/13');
  
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE111','08/01/13','yes','abc','123');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE112','08/01/13','no','dgf','951');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE113','08/01/13','no','dgf','951');
  insert into master_T (ID1,adate,attr1,attr2,attr3)
  values ('IE113','07/01/13','no','dgf','951');
  end;
  

  This has been a scratcher for me head and any help would be greatly appreciated.  I'm coding in Apex 4.1

  Thank you

  -Steve

  Not tested

  merge into current_t c

  using (select *)

  Of

  (select m.*

  row_number() over (partition by m.id1 m.adate DESC order) rn

  of master_t m

  )

  where rn = 1

  ) u

  on (c.id1 = u.id1)

  When matched then update

  Set c.adate = u.adate

  c.attr1 = u.attr1,

  c.attr2 = u.attr2,

  c.attr3 = u.attr3,

  When not matched then insert

  (c.id1, c.adate, c.attr1, c.attr2, c.attr3)

  values

  (u.id1, u.adate, u.attr1, u.attr2, u.attr3)

  ;

• update my current get the new OS 3 Apple Watch

  update my current get the new OS 3 Apple Watch

  Yes.

• Projection Shockwave Flash as v16.0.0.287's plugin check but he updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the situation.

  Shows a check as v16.0.0.287 Shockwave Flash plugin, but it updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the version number or status when rechecking the plugins. Control of Adobe and the Flash Control Panel website confirms 16.0.0.305 is installed. All the solutions to this?

  I noticed in the information in the topic: plugins page under Shockwave Flash, path: line was showing.

  < path: C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_287.dll,C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_305.dll >

  For outdated version 287 .dll file was still there and listed before the current version of 305. I deleted the 287 .dll version and restart Firefox and check the plug-ins again the problem seems to have been resolved.
  Greetings - Spindrift

• Do not observe the current or the failure to update the passwords in keychain

  My passwords change faster that the Keychain can keep up with them.

  In some cases, I see the passwords in the Keychain for applications in 2013, even if they have been changed several times years ago. But bunch does NOT show the current passwords in many cases.

  Is it possible to have the keychain to update the last passwords, or what I have to add them manually every time they need to be changed?

  No Keychain update?

  What I am doing wrong?

  I really didn't ant to spend $$$ for a Manager password if I have to.

  But it could be useful now because passwords must be changed so often and are becoming so complex.

  I would hope that bunch would be able to stay with her.

  Mac OSX 10.10.5

  Try running Keychain Access/First aid and reset the original keychain.

  Keychain Reset

  The problems of Keychain - see post of khati

• There is a special token that I can put in a column of the CSV file recovery channel which implies approval of the current value?

  Versistand version is 2013 sp1.

  I use stimulus CSV expressions in my sequence in real time and want a channel to keep its value current (last) until a certain time. Is there a way to do this?

  Stimulation CSV file example:

  timestamp, chan1, chan2

  0,0,

  10, 1,

  20,1,5

  30,2,10

  In this example, chan2 would retain its current value until the timestamp 20.

  Is it possible to implement this feature?

  Kind regards

  Rick Howard

  Thank you! It is a valuable feedback. I can't think of a way to do natively with the functionality of reading CSV for sequences in real time. Some thoughts on how this can be done:

  1. create your own utility to sequences of script based on a CSV file in real-time. Extend the functionality of having a special marker in a cell which designates not only to change the value for the channel as timestep. Do not start from scratch. This tool open source and this one the two script of sequences in real time and stimulation of reading profiles based on data sets (although in different ways).

  2. with the help of software without insertion to the fault of the string value that you want to keep the initial value for the first X seconds of reading the CSV file. For example, you could play another sequence with your CSV file at fault the channel at its current value so that reading CSV does not replace the value.

• Hi whant to update the changed value to dishes of the same variable used in the entry. How to do thanks in advance

  Hi, I want to update the value out put of the same variable used in the entry. How to do thanks in advance

  ya I got it. using the property node (and if you select value) we can do. Thans for answer

• Subtract value of the signal of the current value 2 seconds ago

  Hello

  I'm relatively new to LabView, but I went through the Forums and google a lot and have not found a solution. I have this problem:

  I have an analog signal from my USB6009 DAQ of NOR. I want to take the signal I got 2 seconds ago and subtract its value to the current value. And I want to do it countinously.

  My data are acquired 1 sample on request by NIDAQ Deputy in while loop.

  Signal result should be something like:

  Y = y - y(t-2), where there is a result and there is a signal of NIDAQ.

  Can you help me or anything else you need to know to help me? Thank you.

  You must use a ring instead of the shift register buffer.

  

  Your signal source must be configured to read constantly (take readings more (best would be multiple of line period) and average)

• Windows Update cannot currently check the updates, because the service is not running. But it is!

  When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  Steps has been involved:

  1. I restarted and even restored to the point when the last update was installed.

  2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

  Any ideas?

  PA bear,

  I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

  1 Win 7 Home Premium installation

  2 64 - bit OS

  3 avast! Full version

  4. no other anti-virus/anti-spyware has never been installed

  5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

  6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

  Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

• How to make the current value by default to all controls both

  Choose 'Data Operation'-> 'Do current Default value' to several controls requires a lot of clicking. Is it possible to do so with a single click?

  Yes.  If you select no control, he says 'Do the current default values' and it does all the controls at the same time.  If you have a control is selected, then it does so only the selected controls.

  Reset the current values default works in the same way.  Do not select anything, he does all the controls at the same time.

  Bob Schor

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/