delete first 8-bit
output bit stream is "0000000001010000" but I want to first of all remove the 8 bits
for the tip out put is "01010000". What should I do?
Thank you
If you want to change the input stream, I would use Decimate 1 d Array.vi (after the string in array of bytes)
More notes:
It is usually best to convert them inside the loop
If you add 18 to reshape the size after the first loop, you will get the same input immediately - bit without generation table additional (right click-> CONCATENATE arrays in these cases) and second remodel.
Edit: Maybe I did not understand you. You want to remove only the first byte of the long message? Then table subset (or remove table) will work. I thought it's points of 2 bytes, you want to get rid of the first byte to each of them. Overload...
Tags: NI Software
Similar Questions
-
Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader
Hello
Please try:
http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe
Another option: click on the following link and click Search now :
Kind regards.
-
I can install adobe pro cs4 on windows computer first 64 bit I can install
I can install adobe pro cs4 on windows computer first 64 bit I can install
Yes, you can install it.
-
FRM - 40102:RECORD MUST BE ENTERED OR DELETED FIRST.
Magalie
I did a form in which I had taken three blocks with the help of assistants datablock and on a block that I had taken a push button on which I had written when the shutter release button that retrieves records from the database of the form elements
declare
cursor c1 IS select payperiod refno, amt, refdate, paycalperiod
of prmamed
where empno =: MED. EMPNO
AND earningdeduction =: MED. EARNINGDEDUCTION
and paycalperiod is not null;
BEGIN
GO_BLOCK ('PRMAMED1');
OPEN C1;
LOOP
FETCH C1 INTO: PRMAMED1. PAYPERIOD,: PRMAMED1. REFNO,: PRMAMED1. AMT: PRMAMED1. REFDATE,: PRMAMED1. PAYCALPERIOD;
NEXT_RECORD;
WHEN EXIT C1% NOTFOUND;
END LOOP;
PREMIER_ENREGISTREMENT;
Close c1;
go_item ('PUSH_BUTTON16');
END;
This trigger works correctly its me gives the proper output, but it gives also an error IE
FRM - 40102:RECORD MUST BE ENTERED OR DELETED FIRST
could someone help me how to remove this error
Thanks in advance guy
Published by: Christine Konditamde July 8, 2009 22:59Hi, Christine Konditamde,.
Exchange the two lines in your code like:
EXIT WHEN C1%NOTFOUND; NEXT_RECORD;
You should do next_record if there is some recovered record. Here you have first gone to the next record and if suppose he isn't get any folder, it will give you FRM-40102, because you're trying to create the folder to the last record.
It will be useful.
Check the answer as useful / OK, if this can help you
Carole
-
How to download the 64-bit first 13 once purchased items.
http://www.Adobe.com/downloads/other-downloads.html can help
-
deleted emails disappear just - I checked the settings and they are not configured to automatically remove. When I try to send an e-mail, as they go to the Outbox and windows mail will not send not and gives all the details in the window box, its just empty. When you return to the Outbox of the body of the e-mail message was gone.
You can have an email stuck, even if you don't see it.
How to remove an Undeletable Message stuck in Windows Mail
http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.htmlWMUtil
http://www.oehelp.com/WMUtil/default.aspxBruce Hagen MS - MVP [Mail]
-
My office is a hp pavilion phoenix self. It had vista Home premium installed. I upgraded to windows 7 and now using this operating system. I removed IE 32 bits in error and now I only have THE 64-bit. How can I get THE 32 bit on my computer because there are programs that IE 64 bit does not work. There should I let the dog sleeps lying?
Press Windows key + R
Type:
C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Right-click and PIN in your taskbar
-
Trojan.Zero.Access.b VIRUS how to delete on 64 bit Windows 7?
I have run all the scans. I had to manually remove the trojan.zero.access.b virus.
Should J'hooow I do this?
Hello JBishop1001,
Download and save McAfee Stinger on your desktop
http://www.McAfee.com/us/downloads/free-tools/Stinger.aspxClose all browsers before you start. Disable your antivirus and anti-malware software as appropriate.
HOS to temporarily disable your anti-virus, firewall and Anti-malware programshttp://www.bleepingcomputer.com/forums/index.php?showtopic=114351
n systems Windows 7 and Vista, right-click Stinger-icon on your desktop and select run as administrator.
On XP, double-click it to start it.Drive C is the default value for scanning.
Press the button Preferences. In the top of the page right block "on the detection of the virus', click repair
In the low 'heuristic network of suspicious files check"block select HighClick the scan now button.
When you're finished, use the file menu and select Save report to file
Stinger.txt is the report of the journal and will be saved to your desktop. Copy paste & the contents of this log in your next reply.Stinger is a stand-alone utility used to detect and remove specific malicious software. It is not a complete analysis for all types of malware or viruses.
It is not intended as a protection against the virus.In your next reply, be much more accurate. You didn't tell what you've done analyses, what is your anti-virus program, and if it is current and up-to-date.
Consider to have guided help free a forum of anti-malware! Cleaning of malware are more often too complicated to treat.
* See malware removal forums help: read the instructions above the Forum and post your logs (as required by the forum)
for one (and only one) of the following
http://spywarehammer.com/simplemachinesforum/index.php?board=10.0
http://aumha.NET/viewforum.php?f=30
http://www.Malwarebytes.org/forums/index.php?showtopic=9573
http://www.bleepingcomputer.com/forums/forum22.html
http://Forum.malwareremoval.com/viewforum.php?f=11
http://www.spywareinfoforum.com/index.php?ShowForum=18
http://www.spywarewarrior.com/viewforum.php?f=5&SID=24750ebcb0d878746c0ca7ab9210f7ae
http://forums.Spybot.info/forumdisplay.php?f=22
or other appropriate bodies of expert analysis, not here.* *.Very sure that you read and follow the very high on the forum that you have selected.
-
Where are the 64-bit versions of Firefox beta 8?
I noticed that Firefox 8 will come out a week, so I wanted to try one of the beta. I heard the advertising a little back on the fact that Firefox 8 will be the first version of 64-bit (Windows). However, there is no 64-bit Installer in any of the beta releases or releases the Aurora. The latest 64-bit build, I can find is http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011/08/2011-08-15-03-07-38-mozilla-central/. 64-bit support has slipped? I noticed that there are not yet any release of 64-bit Firefox 9 in Aurora.
No, the first 64 bit version would be Firefox 10.0 - but only if a 64-bit version of nightly Aurora next week.
Development built beginning as every night, then move to Aurora, then Beta, then to be a Release. No construction of Aurora and it remains as a night - two versions of the exit.
-
Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and reinstalled Firefox 5, everything has worked again. It was using Vista 64-bit.
Upgrading to Windows 7, uninstalled Firefox 5, installed Firefox 7, had the same problem. Uninstalled Firefox 7 completely (including profile information, I saved this information in another file), restarted the computer and installed Firefox 7 using a clean profile. Do not install add-ons, checked to make sure that all plug-ins were updated and updated plugins up-to-date.
Now when I run Firefox, I can load 3 or 4 or 5 tabs very well - after these first tabs bit are open, I can not open or refresh all other tabs - with about: config and the add-on Manager - I have to restart Firefox. The hangup does not appear to be associated with what websites I try to open, but it seems that the number is the problem. I ran through all the procedures of the FAQ, including changing the maximum number of connections to 48, and the problem does not seem to go away.
As a side note, I had this same problem when I tried to go from version 5 to version 6 more. Version 5 is the latest version which worked on my system.
The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.
Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.
See also:
-
HM, as nobody answers my questions from 32 to 64-bit, I'll keep wondering:
Function FindPattern does not seem appropriate for 64 bit, because the starting index continues to expect a regular 'int '. 'Number of bytes' is defined as ssize_t, but this seems not very consistent, if I can start in the first 16 bits, but then extend to the 65 bit length; It is strange that it is not possible to start a length of 2 ^ 35 and looking for only 2 bytes...
In addition, using the argument 'number of bytes' said: the function returns an error if you pass a value greater than UINT_MAX.
On a 64-bit system, using, as required, ssize_t, UINT_MAX is a very small number...?
I completely misunderstood the idea of ssize_t or there are a few bugs in the implementation of the functions of 32-bit / 64-bit.
All of the functions of "String Manipulation" to which belong the two FindPattern and CopyString do not support strings longer than bytes INT_MAX. Note that StringLength (which is this set of eqivalent of strlen functions) returns an int. These functions have not been modified to support longer strings, because it was not expected that a program will work with any strings longer than 65 535 bytes in length. This conservative approach was taken to avoid unnecessary warnings when porting 32-bit code to compile in 64-bit mode. Consider the following line:
int len = StringLength (str);
When it is compiled in 64-bit mode, this line generates no new warnings. If StringLength had been changed to return a ssize_t, there would be a new warning to compiler on to value truncation (just as you saw during the passage of strlen in CopyString).
If you work with generic memory, rather than true channels, you are probably better off using the ANSI functions (e.g., memcpy, strlen, etc.).
A. Mert
National Instruments
-
integer of 32 bits carried by gpib
Hello
I currently write software for the acquisition of data and control for a testing machine Instron with a GPIB Bus with Labview. The machine is not the youngest, so I cannot use the 488 commands, not the VISA controls. My control software works this far, but with the acquisition of data, I encountered some problems for which I couldn't find a solution that far. I just taught Labview to myself two months there, so sorry if my questions seem silly to you. I searched the forum and the internet and could not find an answer to them.
So here's my problem:
I like to read my Machine with the command "GPIB-read" data, it gives a string, so I gues it automatically assumes that the data are encoded in ASCII. Well, the machine uses its own coding, described in its manual! I read the header of the measure (it's '#I' in the ASCII format), after that there is a signed 32-bit integer that represents the length of my block of data. Then there is a 16-bit byte and after a lot of 32-bit signed bytes that represent my measurement data. There is no mark of separation.
When I got out, I just get a string of crazy ASCII code (outside the "#I" at the beginning)
My approach to decode the message, that is that:
Convert the ASCII code in binary code (not with Labview, I couldn't know how it works, either. there at - it an easy way to do this?), so I ignore the first 64 Bits (2x8Bits of the entire + 32 bits wide + 16-bit header) and then I try to divide the string into an array of 32 bytes long strings and see if the data is good. In my assessment, I had three values that when it is constant, it should be just three alternate values. I always get the wrong data and especially not, I work with Labview, but later I have to because I want to view the data in real time.
There is a lot of work and I just wanted to know, if I'm on the right track or if there is a simpler solution. Later, it shouldn't be a problem to display an array of integers as a wave, right? Is there any advice or you can give me any advice?
Sincerely,
Simon
- Request VISA 488. So I don't see why you can't use the VISA.
- A byte is 8 bits. There is therefore no such thing as a 16-bit byte. It's a Word.
- The string Unflatten is your friend here. You can use it to decode every part of your order. And since your actual data is just a string of 32-bit words, you can use the Unflatten of string to turn that into an array directly, just to make sure "Data includes table size" is set to false.
-
How to identify files that may be deleted without jeprodizing the files needed to run the system?
If you have to ask, the answer is "Don't '. Uninstall programs that you don't need through programs and features or add/remove programs. Do not, under any circumstances, remove files unless you are absolutely sure you know what you delete first to 100%.
-
FPGA DDS phase 64-bit register
Hello!
I have some difficulty in updating the code below to use a registry of phase 64-bit instead of just 32-bit or link. I can change the value of control to 64-bit data types, as well as pass the fancy addition with wrap vi to 64-bit. I'm not sure, but how should I change change of logic-5.
Thanks in advance!
http://www.NI.com/example/31066/en/
When you split a U64 you get two U32. The Subvi expected U16 (you see the points of constraint due to incorrect data types).
I suggest shifting the U64 3 bits, then divided in two U32, divide the top once again to the two U16. Since you staggered 3-bit the first 3 bits are 0, resulting in a 13-bit address. The lower U16 is for interpolation.
-
Someone knows how to upgrade to Windows 7 64 bit to dm3?
Hi all
Recently, I bought my computer laptop pavilion dm3-1028tx (sp9300, 4 GB ddr3). Unfortunely only it comes with oem windows 7 Home premium 32-bit instead of windows 7 64-bit.
Due to the characteristic of 32 bits, its only 3 GB of ram could be used.
IM plan to upgrade my windows 7 Home premium 32-bit to 64-bit windows 7 home premiun.
I tried to contact microsoft in my country, they said I should ask to HP, if I could spend my windows because its OEM.
Someone knows how to upgrade my windows 7 32 bit to windows 7 64 bit without having to buy a new one? Please help me I do not know.
Thanks a lot guys
Unfortunately, you will need to buy the 64-bit version, unless you can get HP to you give 64-bit free citing inability to use all of the memory as a customer support/advocacy. But you should check on HP website to see if your model was first 64-bit drivers.
He will have to do a new installation as well. And if HP is not actively support 64-bit for your model, you will lose the HP software (most consider bloatware anyway). You will also lose built in recovery option. So, at least, make sure you create your restore disks.
You may be able to wash to recover the partition, but I don't know how you would be able to use it without recovery software that HP has loaded.
Maybe you are looking for
-
He repeats to me follows her, ' there's a problemwith a previous purchase.» Update your payment method. But there is nothing wrong with my card? (so I can't download apps or update even tho it free it says purchase)
-
Update Adobe's Flash and Microsoft's Bing. Browsers have been checked
Insert update Adobe stopped any vial using browser, obliged to register, now have Bing from microsoft on all browsers. Any solution?
-
Cannot use my GPIB device with labview
Hi all I installed my GPIB card, but now I am facing another issue. When I try to import device recognized by Visia (photo 1) it does not appear. My device is a function tektroniks generator. I just need 2 functions: change of frequency, type of wave
-
I installed the game ghostburters on windows vista Home premium with service Pack 1 and it runs very slowly, I tried the upgrade a few things bo nothing helps. whay can I do to improve the speed?
-
How to change/hide metadata of photos before loading on the web.
I wish that the metadata for the photos I took, or had been shared with me by others to hide when I upload to the web. Much of this information is not those business but mine and allowed me to share both personally and professionally. How should be d