Peer-to-peer networking for vista

Similar Questions

• Vista suddenly requires user name and password for peer network XP, WHY?

  Network is a mixture of XP Pro with Vista Home machine. Vista had been particularly transparent connection to a peer network XP, but suddenly invites to indicate the user name and password to login. Only the user for this XP is 'Admin', but login is not necessary. Why is Vista promting to connect? All attempts to answer fast connection with the good username and password fails. Why? How can I make Vista not prompt connection again?

  Try here:

  Vista - XP and Vista Peer to Peer
  http://www.Vistax64.com/Vista-Networking-sharing/126779-XP-Vista-peer-peer.html

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• How to change the user name - peer-to-peer network

  I recently installed shareaza, is a peer-to-peer network as you know. the problem is that all of my folders have my name on it: that is to say, he will say sharedfiles/Jose/my documents. I tried to change my username on useraccount, but the name of Jose remains on everything. is there anyway I can change this? Thanks for any help

  Hello

  The fact is that the username will be created at the beginning of the installation of the OS.
  It comes to you account on the laptop.
  Each user account includes the folder my documents.
  In this case, you cannot change the user account if you have a single user profile on the laptop. The title of the user accounts, you can create additional user with different names.

  The other possibility would be to change the download source. But that you change somewhere in the program settings. Unfortunately, this program is unclear to me. In this case, I can give t you information where you will find this option.

• Problem with several user to access the files on the same PC in a peer-to-peer network

  I have 9 PC running a mix of Windows XP Pro (32 bit) and Windows 7 Pro OS on a peer-to-peer network.

  These 9 PC are in the same workgroup that they need to access the same file on a computer acting as a file server, under Windows XP Pro.

  There were once only 5 user accesses files on the PC for editing and other purposes. But recently we have increase the user accesses files on the PC at 7 and there are times when the 6th user is unable to access the files until 1 the user has closed the file that he became.

  Is it possible to increase the number of users able to access the file?

  Hello

  The upgrade of the server or any other computer that keeps the number of connections to Win 7 Pro can bring some relief (Win 7 pro will support more connections).

  However, if it is a business, it is time to start investigating Windows SBS.

  http://www.Microsoft.com/SBS/en/us/default.aspx

• Peer networking grouping service is not running is the message. How to operate?

  I have two computers at home and have installed a printer on a wireless.  I tried to install another printer wireless in another part of my house but keeps printing one already installed.  I received a message ' peer networking grouping service isn'g running. "  If it could fix the problem, and if so, how can I get the service running?

  I finally got

  1. right click on the three services

  a peer network group)

  (b) peer network identity Manager

  peer name resolution c)

  one after the other.

  (2) rear right clicking on go properties-> logon.

  (3) name of the same profile for all three abuse (passwords must be retyping your own).

  then restart all of the services of three.

  Finally cool off homegroup...

  you will find no error :)

  It worked for me, thanks.

  1. I started by selecting 'peer network identity Manager.
  2 and clicked on the tab log.
  3. then select the bubble for "this account" not "sys local VAC.
  4. then click on the Browse button.
  5. then advanced down to the left.
  6. then find now on half right.
  7. Select "LOCAL SERVICE".
  8 then Ok outside.
  I was asked to restart the service before amendments would change, but I jumped until after I changed the other two services.
  Repeat steps one although 8 to peer name resolution and peer network group in that order. (I don't know why it makes a difference, but it worked for me)
  9 restart the peer network identity Manager
  10 start of peer name resolution
  11 start grouping of network of peers
  It worked for me and I've been hunting for days. Thank you very much to all the world. And a big thanks to rajanaveen.

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• How to fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)

  How can I fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)?

  Hello

  1. do you get any error message related to name resolution Protocol Service by peers or Peer Networking Identity Manager Service?

  2. the performance of the computer is made?

  3. were there any changes (hardware or software) to the computer before the show?

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information helps.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• Cannot open the link in a peer-to-peer network

  I created a peer-to-peer network between two equipped PDA to Windows Mobile 5.0. It is shown that two of them were connected, and their IP addresses are assigned automatically.

  But when I used the function of TCP/IP Open, it returns an error 10060 "cannot open connection". I miss something here? It should be a simple connection.

  The IP address 169.254.x.x, this is what is called a "auto assigned IP.  Which means that the device is set to get an IP from a DHCP server, but when he cannot find a DHCP server, it takes an IP address.  This allows to have an address on the computer network, but likely to be on the same subnet are not likely.  Also, the 169.254.x.x will change each time the computer restarts, or the NIC decides to try to obtain an IP address again.  It is never a good idea to use an IP address auto assigned in the communication of data, because these problems undelining.  If you do not connect to a DHCP server, it is always better to set a static IP address.

• access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network

  access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network.  I enabled netbios over tcp/ip on computers

  Hello

  Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881

• Trying to replace a XP computer with another XP computer in a peer-to-peer network with two other computers.

  Replace a XP computer with another XP computer in a peer-to-peer network with two other computers. became terribly frustrating. I spent a day and a half by train to get there. I know MS wants everyone to buy their new OS, but I can't afford it right now. In the meantime, I'm trying to add a computer to my existing peer-to-peer network. I have never had so much trouble. I can not get computers to eachother Duke on the network.

  Over the past 3 years I have implemented each of the existing computers. I'm familiar with the silly quirks of this operating system (i.e. a few hours waiting see if eventually the computers will warm up to each other and decide to play nice together). All computers are able to connect to the internet through the same router connection, and I was able to get each of the computers to see one another, but not all, but none of the computers is to see the new computer. (The new computer is connected to ONE of the other computers, but stopped doing and do again it). Is there a simple step by step to do this? I don't care even if I can't not all computers on the network as a whole, I would like to just the computer I replace to see the computer I replace by in order to obtain the transferred files and get back to work.

  I appreciate sincerely ANY help ANYONE can offer.

  Hi okcbz,

  1. How many computers on the network?

  I suggest you have a look at the following links in the article:

  Introduction to Windows Peer-to-Peer network

  How to set up a small network with Windows XP Home Edition (PART 1)

  Windows XP Help & how-to
  

• Linny Hey, the site you posted Error 1606.Could not access network location % APPDATA%\. It is also for Vista?

  I went on the site and I've seen XP.  If not. Do you have a recommendation for Vista?  I tried HKEY_LOCAL_MACHINE\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders. I've not found errors in this folder and created a new folder for APPDATA.  I also got this error when I tried to install the updates for Java

  Hello CyndiLou,

  Thanks for posting on the Microsoft answers Forum.

  Try this article. I don't know what article Linny gave for you.
  KB 886549 - you receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  If please reply back and let us know if you still need help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No driver controller network for Portege R500 (Windows XP)

  Hello

  I don't understand why Toshiba does not have the drivers needed to make a new Portege R500 WLAN works. I have absolutely no ability to wireless networking, as if the switch is off, and I have a yellow question mark in Device Manager of Windows ("other devices", "Network controller"). Windows can't find a driver on the restoration of two CDs and trying to install all of http://aps2.toshiba-tro.de/wlan/?page=downloads doesn't help either.

  Someone manages to find the drivers to fix this 'Network controller' for a R500 Windows XP? Maybe that my device has a hardware defect, because I can't believe this WLAN for XP support is not provided, out of the box or at least by downloading files on the Toshiba support site

  Thank you
  Olivier

  Hello

  It is strange for me to read your ad one thing. Can you explain what you mean with: Windows can't find a driver on the restoration of two CDs.?

  As much I know restore CD/DVD is not a kind of collection driver but the recovery image that you can use to clean operating system installation. Can you please tell me what restoration (recovery) CD you have? Are two of them for an operating system, or you have one for Vista and one for Windows XP Home edition.

  I checked Toshiba's support page and it has a WLAN driver version 11.5.0.32 / 9.0.4.37. Download and unzip the driver files and before you start installing check readme.txt file first.

  Moreover, for the installation of Windows XP Home edition please use the Instructions of facilities document and follow order listed facilities.

• Windows Update for Vista (KB2286198) _

  Everything from the lates Windows Update has been installeded for Vista (KB2286198)

  I was not able to use my card to air with the Cradlepoint router.  The computer can see the router but only connect with local and non-local and internet access.  If I plug the modem from Verizon in the computer USB it will not work.  I have uninstall-ed the update and it works again with the Cradlepoint wireless modem.  Then, the update automatically installs again and I have the same problem.  What can I do to fix this?

  First, uninstall again and then search for updates and it should appear.  Right-click on it to hide, and it will not be downloaded or installed or appear again (but you can still get in case of need if she and him to download and install-, but I wouldn't do that).  You will need to put it to manual and not automatic selection to do this.  So, try the following:

  Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135 and disable your security software.  See if the installation works. However, once don't forget to put Vista in normal status, as described in the procedures. If that does not work, uninstall it again.

  Also read and execute the steps ofhttp://support.microsoft.com/kb/971058.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.