Disabling update the configuration file without stopping the VI

Similar Questions

• How can I stop windows vista without updating the updates

  How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later

  Hello

  You can change the settings for windows update to check for updates but let me choose whether to download and install them.

  Change how Windows installs or notifies you of updates

  You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.

  See the Windows updates are installed

  You can also read the following article to reset the Windows Update components and check.

  How to reset the Windows Update components?

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• PCI-6601 reading pulse without stop the meter

  Hi, the problem seems to be simple, just for the moment that I did not came up with a reasonable solution. I'm programming the meter 6601 for the following using my own routines of driver (in visual studio 2008 C++) for read/write registers. I follow carefully the DDK examples. I started with the example 1 and 4, and it works very well and now I have to somehow come up with the following code:

  1. I use the signal specific to 10 MHZ external H. MAser as input to the meter.

  2. I start the meter with arm software and am constantly read the values of the counter.

  3. I want everything just to read a single pulse (1PPS) and make the absolute time of the counter in time synchronization UTC. He should simply give me the meter reading of the rising edge of the PPS signal but after that it should be possible to read the counter as usual by reading the save save values, so read pps without stopping, nor anything in the registers of meter loading or b, simply give a pulse reading and continue even as 2...

  Any suggestions?

  Hello

  problem solved, but anyway, to all those who might have a similar task, here are the raw extract of what I've done (code names and function are similar to the DDK, but has nothing to do with the DDK)

  Sub yourclass::yourppscountfunction()
  {

  m_stopPPS = false;
   
  first reset internal values
  card1. Write_G01_Joint_Reset_Register_G0Reset(); reset the counter 0
  card1. G0_Reset_Registers_Values (); Reset internal values
  Disarm
  card1. Write_G0_Command_Register_Disarm (true);
  load the initial value of 0
  card1. Write_G0_Load_A_Register (0x00000000); counter should start with 0
  card1. Write_G0_Command_Register_G0_Load (); tells to load the initial counter of a register value
  Set the source to time external base
  card1. Write_G0_Input_SelectRegister_SourceSellect (1);
  Select the axis dedicated to door sellect (default value in this case, PFI_38)
  card1. Write_G0_Input_SelectRegister_GateSellect (1);
  card1. Write_G0_Mode_Register_Gating_Mode (2); rising edge Gate
  card1. WriteIO_Config_Reg_Pin36_Select_out(); Configure the PFI_36 PIN to drive the output
  card1. Write_G0_Mode_Register_Output_Mode (1); We're out the TC, connect to a counter2 to count the animated buttons
  Configure the PFI_36 PIN to drive the output (not made here)
  card1. Write_G0_Mode_Register_Trigger_Mode_For_Edge_Gate (3); Gate not used to start or stop
  card1. Write_G1_Command_Register_Synchronized_Gate (true);
  card1. Write_G0_Command_Register_Up_Down (1); counting direction up
   
  card1. Write_G0_DMA_Config_Register_DMA_Enable (true);
  card1. Write_G0_DMA_Config_Register_DMA_Int_Enable (true);
   
  arm the meter
  card1. Write_G0_Command_Register_Disarm (false);
  card1. Write_G0_Command_Register_Arm (true);
  WRITE THE COUNTER VALUES
    
  card1. G0_Write_Mode_Registers();
  card1. G0_Write_G0_Input_Sellect_Registers();
  card1. G0_Write_G0_DMA_Config_Registers();
  card1. G0_Write_Command_Registers();
  while(!m_stopPPS)
  {
  PeekAndPump();
  now loop to see if measures available PPS, if yes, read them and display
  If (card1. Read_DMA_Status_Register_G0_DRQ_Status()) //if that something saved
  {
  unsigned long int counterValue1.
    
  int HWSaveorSWSave;
  HWSaveorSWSave = card1. Read_DMA_Status_Register_G0_DMA_Readbank();
  if(HWSaveorSWSave==1)
  {
  counterValue1 = card1. Read_Save_Register();
  m_editPPSreading = counterValue1 * 1.E-7;
  }
  on the other
  {
  counterValue1 = card1. Read_HW_Save_Register();
  m_editPPSreading = counterValue1 * 1.E-7;
  }

  This-> UpdateData (FALSE);
  } //if something red

  } //while
  card1. Write_G0_Mode_Register_Gating_Mode (0); gating disabled
  card1. Write_G0_DMA_Config_Register_DMA_Enable (false); Disable dma
  card1. Write_G0_DMA_Config_Register_DMA_Int_Enable (false); Disable interrupts
  card1. G0_Write_G0_DMA_Config_Registers();
  card1. G0_Write_Mode_Registers();

  } //after you might normally read the meter (PPS values are added to playback as UTC offset-> not done here)

  to stop playback PPS and continue as normal counter where the values are simply red of the SW save registers
  Sub yourclass::yourstopppscount()
  {
  m_stopPPS = true;
  }

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• Upgrade to Vista, impossible to update the boot configuration

  I have XP Business and when I bought the computer, Vista Business option never made upgrading and trying to now. I have the media, but when I try to install the upgrade it through the first phase (copying files), and then it stops and says "Windows could not update the configuration to start the computer. Installation could not proceed. No idea how to make this work properly?

  Hi Ron,

  Apologize for the delay in response. Please see the following article to resolve this problem:

  When I try to upgrade an earlier version of Windows to Windows Vista, I get an error message: "Windows could not update the configuration to start the computer.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  Back up the registry

  Hope this information is useful. Back to us for assistance.

• Blue screen stop error 0x0000007e (etc.) updated the bios?

  My copy of Windows XP pro does not start at the login screen, I get a stop error 0x0000007e (0xc000005, 0x805d625b, 0xb84c34f0, 0xb84c31ec)

  I looked at these stop error numbers and, since there are a lot of hard disk space, try update BIOS.  The instructions on the Microsoft Web site stop at 'Contact your manufacturer.'  The Dell BIOS update, I downloaded is an .exe file, but the instructions I found are all for a .iso file.

  How do I boot from CD to update the BIOS without this kind of file name or how to update the bios in this form?

  Is there something else I should do if the BIOS update will not work?

  Thanks in advance

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Where HTML5 code indicators are stored in the Configuration file?

  There is a bug in Dreamweaver CS6 where HTML5 code (and perhaps others) indicators stop working when you install ColdFusion 10 for Dreamweaver extensions. If you uninstall the ColdFusion extensions while the HTML5 code indicators work again.

  I want to keep a copy of advice to code HTML5 and then 'paste' returning to after installtion Coldfusion extensions so that Dreamweaver has all the indicators in code, he should have. Why Adobe did not worth to test their software code hinting is beyond me, especially when Coldfusion is one of their own products! But anyway nobody knows where HTML5 code indicators are stored for tags like < header > and < footer >?

  The control of the code hints for the languages based on tags is in a file called C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS6\configuration\TagLibraries\TagLibraries.vtm. It is in a similar situation on other operating systems.

  However, any changes made to the indicators of code based on tags is loaded from the TagLibraries folder in your personal configuration file (see http://forums.adobe.com/thread/494812 for its situation on different operating systems).

  I suspect that what has happened is that the one that created the extension of code hints ColdFusion 10 added new CF tags to an older version of TagLibraries.vtm. This would explain why the HTML5 code hints disappears. Dreamweaver always uses the version of the TagLibraries.vtm file in your personal configuration file if there is. As soon as you uninstall code CF10 indicators, Dreamweaver deletes your personal configuration file TagLibraries.vtm and to using the default version in the configuration of the main program file.

  Since you are comfortable coding with ColdFusion, you should probably have little difficulty to change the version of the TagLibraries.vtm file in your personal configuration file. Simply copy the first element of to the default TagLibraries.vtm and use it to replace the one created by the expansion CF10. You should then have CF10 both indicators HTML5 to code.

  I'm pretty sure that will fix the problem for you. But you should file a bug report about the extension. The ColdFusion team is completely separated from the DW one, and from what I've heard, they do not communicate much. It should be a trivial matter for the CF team to update their extension.

• Model of update the update stopped

  I'll have one of "those" questions. Throughout, my model updates have worked well. I don't really know what I did that the situation has changed (quite honestly, I don't remember doing anything that would cause.) In any case, when I try now to make a change to my model, I get an error message. Once I make a change, and then click file, save,-Dreamweaver asks me, ' update all files based on this template? I click on "Update" and get this message:
  
  Access file 'C:\Documents and Settings\Janet\Desktop\Web140\Web140A\templates\pages.dwt' error: wrong file path error code
  
  I checked the file in Dreamweaver Manager, as as well as in Internet Explorer - Web140A is not (nor was it ever) a subfolder of Web140 as we indicated above (although they were both on my desk in separate folders). When I created the template, Dreamweaver automatically creates the models folder. I don't have the choice, where he went. The only thing I could think is that there is some kind of conflict because I have two sites each with their own set of templates (Yoga Sangha in the WEB140 and the calibrations of JRT) on my desktop (each in their own folder.)
  
  Then I moved the WEB140 file on my desktop (within Dreamweaver, of course), and yet the problem persists. I don't know where else to go with that or how to change the path. Any ideas? Thank you.
  
  I have attached the code for my model.
  

  You can try this simple fix-

  Stop DW.

  Find the folder-

  C:\Documents and Settings\\Application Data\Macromedia\Dreamweaver
  8\Configuration\WinFileCache-*.dat
  (these files are normally hidden - you may have to use Explorer > tools >)
  To view the Folder Options)

  or on Mac-
  / Library/Application Support/Macromedia/Dreamweaver
  8/configuration/MacFileCache-*.dat

  and delete it.

  Restart DW. Works better?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "kpchop" wrote in message
  News:f0ib16$q4i$1@forums. Macromedia.com...
  > I'll have one of "those" questions. Throughout, my updates to the model were
  > worked
  > fine. I don't really know what I did that the situation has now changed
  > (quite
  (> honestly, I don't remember doing anything that would cause.) In one
  > cases,.
  > When I try now to make a change to my model, I get an error message.
  > After I
  > make a change, then file, save,-Dreamweaver asks me, ' update all '.
  > files
  > based on this model? "I click on"Update"and get this message:
  >
  > Error to the file "C:\Documents and.
  ' > Settings\Janet\Desktop\Web140\Web140A\templates\pages.dwt ': incorrect file path
  > error
  > code
  >
  > I checked the file manager in Dreamweaver, as well as in the Internet
  > Explorer - Web140A is not (nor was it ever) a subfolder of Web140 we
  > stated above (although they were both on my desk in separate
  (> folders.)
  > When I created the template, Dreamweaver creates the models folder
  > automatically. I don't have the choice, where he went. The only thing I have
  > may
  > think, is that there is some kind of conflict because I have two sites
  > each
  > with their own set of templates (Yoga Sangha in WEB140 and JRT
  (> Calibrations) on my desktop (each in their own folder.)
  >
  > Then I moved the WEB140 file on my desktop (within Dreamweaver, of)
  (> courses), and yet the problem persists. I don't know where else to go
  > with
  > This or how do I change the path. Any ideas? Thank you.
  >

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• 25 Firefox is unable to read the configuration file on new install

  I try to install Firefox 25.0 on a XP - SP3 machine and receive the error "failed to read the Configuration file. Please contact your system administrator. I use a file to mozilla.cfg that I created and that you have applied to previous versions. The mozillia.cfg file has entries Pref lock, which are formatted as follows:

  lockPref ("Network.protocol - handler.external.shell", false);

  I have read discussions on various forums and the recommended fix seems to be a "clean reinstall. This machine has never installed Firefox, so a clean reinstall is not an option.

  As noted by one side this version of Firefox will be not to read the config on any OS file I tried Win7 or XP, I did a clean reinstall on both of these machines with the same results.

  I appreciate your help with this.

  If it helps, here is the content of my mozilla.cfg and local - settings.js.

  C:\Program Files\Mozilla Firefox\mozilla.cfg

  //
  
  lockPref("security.enable_ssl3", true);
  lockPref("security.default_personal_cert", "Ask Every Time");
  lockPref("network.protocol-handler.external.shell", false);
  lockPref("plugin.disable_full_page_plugin_for_types", "PDF, FDF, XFDF, LSL, LSO, LSS, IQY, RQY, XLK, XLS, XLT, POT PPS, PPT, DOS, DOT, WKS, BAT, PS, EPS, WCH, WCM, WBI, WB3, RTF");
  lockPref("browser.formfill.enable", false);
  lockPref("signon.autofillForms", false);
  lockPref("signon.rememberSignons", false);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("dom.disable_window_move_resize", true);
  lockPref("security.enable_tls", true);
  lockPref("dom.disable_window_flip", true);
  lockPref("dom.event.contextmenu.enabled", false);
  lockPref("dom.disable_window_status_change", true);
  lockPref("dom.disable_window_open_feature.status", true);
  lockPref("browser.startup.homepage", "http://intentionally removed");
  lockPref("app.update.enable", false);
  lockPref("extensions.update.enabled", false);
  lockPref("browser.search.update", false);

  C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "mozilla.cfg");
  

• Why does Firefox launch Updater when starting Firefox if I disabled all the updates?

  How to disable permanently the update?
  For now, I have to turn off whenever I run Firefox and UAC blocks this activity.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

• Beta 5 of Firefox does not check the updates from an account without administrator privileges and won't ask administrator privileges apply downloaded update

  I can't get Firefox Beta 5 to check the updates using an account without administrator privileges. Beta version of Firefox 5 downloaded an update (from 2 Beta Beta 3), and now, there's a button apply update in the Firefox window that won't hurt, even though the update is properly applied from another account with administrator privileges.

  I use Windows 7 Professional 64-bit. In general, I use Firefox for an account without administrator privileges and provide the only administrator credentials when you are prompted to install or remove software.

  Delete the files in the folder updates\0 and updates.
  
  You may need to remove active - update.xml and updates.xml so, if it is present.

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  • http://KB.mozillazine.org/Software_Update (Update works not properly)