Update the table alias errors
HelloI'm trying to update a table alias using the rules file. I'm trying to update members of multiple dimensions in a single file of simple rules. the structure of the column is as below:
(Dim1, Lev 0) (Alias) (Dim2, Lev 0) (Alias) (Dim3, Lev 0) (Alias)
But the rules file above fails in column 3. It says "failed to validate \\column 3. Can you please help?
Thank you!
Hello
Have you read this post? Update alias
I know it's you that triggered it, but does he not answered the question?
Level0, ALIAS0 Dim1, Dim1, Dim2 ALIAS0, Dim2 Level0, Dim3 ALIAS0, Dim3, Level0
must check if each of the dimensions is defined as a type of build level
You can quickly test it by creating a file by saying the following.
dim1val, dim1alias, dim2val, dim2alias, dim3val, dim3alias
Create a new rule to load.
Assign the construction of the dimension.
Open the text file
Set the properties of each column as
Level0, ALIAS0 Dim1, Dim1, Dim2 ALIAS0, Dim2 Level0, Dim3 ALIAS0, Dim3, Level0
set the dimension build properties dim1, dim2 and dim3 as the type of build level.
validate
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Update the table of contents, errors in bookmarks
When I update my table of contenst, it creates errors in my favorites. I have a hierarchy of level three with my titles of paragraph in my table of contents. When I update the table of contents, it takes the last item in my lowest level and a level higher than it is actually.
Any ideas of what is happening and how can I fix?
OK, thanks to your last message, I began to explore the Table of contents dialog box and understood what the problem was. It had to do with the levels that I had assigned to the table of content items, which I was incompatible. Now I have the right levels assigned to the table of content items and it updated bookmarks perfectly!
Thanks for your help.
-
Update the table using discoverer
Hello
I'm trying to update a table whenever the user runs a report of the Office of the discoverer. I tried to use a function to do the job, but I get the error below.
ORA-14551: cannot perform the DML operation within a query.
I also tried to
1. create a procedure and update the table in this procedure.
2. function to create and call the procedure created earlier in this function and use it in the discoverer, but still does not work and I get the same error ORA-14551.
Please let me know if this is possible at all the. If SO, let me know the steps to do so.
Thank you.Hello
Yes you can update the discoverer dashboards using a PL/SQL function. You must make the function a standalone transaction. for example
FUNCTION update_record (key_field VARCHAR2) RETURN VARCHAR2
IS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
..
UPDATE your_table
..
COMMIT;
..Rod West
-
What API can be used to update the table cs_estimate_details (repair)
I need to update the columns 'pricing_context' and 'pricing_attribute1' in the cs_estimate_details table.
Which API can be used to update the columns. Where can I update the table directly?
Try to use this "CS_Charge_Details_PVT" which in turn call "CS_ESTIMATE_DETAILS_PKG".
-
How do I update the table in Jdev
Hello
I use Jdev 11.1.1.7.1.
The control of data, I added that ADF only read the table. When I click on the button create and return to the report screen, highlight lines are added.
Highlighted those who is not inserted into the DB table but he showed in the report. How to remove it. How can I update the table?
Kindly advice me.
Thank you
Swathi
That's what I got:
-You have a table read-only, and a link to create.
-When you press the link create a popup will be launched with a new record (may be a form in the same table iterator).
-When you press save to save the changes validation triggers, stop you to insert the record.
-After the fire of validation you will close the pop-up window (by pressing icon or by pressing Cancel).
-After closure of the pop-up window, you will find that reading one table has some blank lines.
If it is your problem if you have 2 choices:
1. in the AppModule you can make a new instance on the view object (to which redirect the table) If your view object called 'EmployeesView', so, in AppModule, you should have EmployeeView1 and EmployeeView2 and your table may point to EmployeeView1, and when you create new line create in EmployeeView2 and after completing the creation you can run the query and then refresh the table (as shown in the following code).
2 - the second option in the popup cancelListener link at the rear bean method then you can update the table by program as:
DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("TableIteratorName"); // from pageDef. iter.getViewObject().executeQuery(); RequestContext.getCurrentInstance().addPartialTarget(getTableComponent());// from table Binding property bind it to object in back bean
-
Hi all
I have a page jspx, with a table and a button.
Create the table data control, and it contains 4 columns
(Name, card student, asked (Question or answer)).
I create the code for the button to work
1. Select a record
2 send email
3. when I send the request goes from Q to A
All work fine. The mail has been sent. The demand for DB password Q has. But in my jspx table refreshes.
Until I close and open again, it displays all the data.
How cal I solve it?
Thanks in advance
Christos.
Simply add partialTrigger on table pointing to the button.
It will update the table when the button is clicked.
-
How to update the table with the number management
Hello
I need as there is a loc_tab of the created table as below,
CREATE TABLE loc_tab
(
Country_ID NUMBER,
country_code VARCHAR2 (3),
country_name VARCHAR2 (50).
State_ID NUMBER,
state_code VARCHAR2 (3),
state_name VARCHAR2 (50).
city_id NUMBER,
city_code VARCHAR2 (3),
city_name VARCHAR2 (50)
);
I inserted records like below,
Now, I wanted to update the table such that all ID columns are updated with running number.COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME IND INDIA TN TAMIL NADU CHN CHENNAI IND INDIA TN TAMIL NADU TRI TRICHY IND INDIA TN TAMIL NADU CMT COIMBATORE IND INDIA TN TAMIL NADU MDU MADURAI IND INDIA AP ANDHRA PRADESH HYD HYDERABAD IND INDIA AP ANDHRA PRADESH SEC SECUNDRABAD AUS AUSTRALIA QLD QUEENSLAND BRI BRISBANE AUS AUSTRALIA TAS TASMANIA HB HOBART AUS AUSTRALIA TAS TASMANIA CCE CITY OF CLEARANCE AUS AUSTRALIA TAS TASMANIA BUR BURNIE
Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
Here are the contents of the table, and that's how the table should be updated,
Thank you and best regards,COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME 1 IND INDIA 1 TN TAMIL NADU 1 CHN CHENNAI 1 IND INDIA 1 TN TAMIL NADU 2 TRI TRICHY 1 IND INDIA 1 TN TAMIL NADU 3 CMT COIMBATORE 1 IND INDIA 1 TN TAMIL NADU 4 MDU MADURAI 1 IND INDIA 2 AP ANDHRA PRADESH 1 HYD HYDERABAD 1 IND INDIA 2 AP ANDHRA PRADESH 2 SEC SECUNDRABAD 2 AUS AUSTRALIA 1 QLD QUEENSLAND 1 BRI BRISBANE 2 AUS AUSTRALIA 2 TAS TASMANIA 1 HB HOBART 2 AUS AUSTRALIA 2 TAS TASMANIA 2 CCE CITY OF CLEARANCE 2 AUS AUSTRALIA 2 TAS TASMANIA 3 BUR BURNIE
Shiva
-
How to update the table when change list item in the classic report
Hello
I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.
My question
1. how to do it in javascript and get the value of the list item and update the table with the new value
2. do I have to use the API to create the list item so I can get the value of the report item or what.
Thank you
AhmedYou can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htmBTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.
-
Update the table on the dialog flow back task...
Hi all
I have a table. In a context menu of the table, a user uses a menu command to launch a workflow task merely as inline popup dialog box, which allows them to alter certain data associated with the selected line. It all works very well.
What I'm trying to understand, that's how I trigger a refresh of partial page on the table once the workflow returned and the dialog box closes. I tried to call a support as target bean method of the "listener after" for the call activity of workflow that call the stubborn workflow, which calls AdfFacesContext.getCurrentInstance () .addPartialTarget (table), but which did not cause a refresh of the table. I waited a bit that would be the case.
So, what event can I link at the right time in order to update the table?
Thank youHello
When you open a workflow bounded in a small popup, then you use the earpiece back on the component that runs the pop-up window to refresh the table. On http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html, see example #69
Frank
-
Text disappears by updating the table of contents
I work with documents several pages that have been created by someone else in CS3 and then I convert it into CS5. Several times when I tried to update the table of contents, all text in the document disappears. All the objects to hold their positions and nothing else changes except that there is no visible text. I checked the table of contents style settings and can find no difference between a document that updates correctly and which don't. Around her, the only way is to copy and paste the content into a new document. This does not happen with all documents, only about 30%.
Text disappearing when you update a table of contents is usually a symtom of havint put the table of contents in the main story line. The table of contents must be in a separate story, no wire to anything, because the update replaces the whole story.
-
Error when try to use the rowid with the table alias
I tried using a table alias to test the functions of Manager of rules and met the following problems.
1. I have clone from a schema HR employees and departments tables.
2. create data as follows:
BEGIN
dbms_rlmgr.create_event_struct (data = > 't_a');
dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
attr_name = > "a_employees"
tab_alias = > exf$ table_alias ('employees'));
dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
attr_name = > "a_departments"
tab_alias = > exf$ table_alias ('departments'));
END;
3. create the class rule as follows:
BEGIN
dbms_rlmgr.create_rule_class (rule_class = > 't_as',)
Event_Struct = > 't_a. "
action_cbk = > 't_acb ',.
rslt_viewnm = > 't_arv');
END;
4. After adding a rule to the rule class, I try to test as follows
DECLARE
r_emp ROWID.
r_dept ROWID.
CURSOR a_cur IS
SELECT emp. ROWID, Dept. ROWID
Employees OF ministries dept (IEM),
WHERE emp.department_id = dept.department_id;
I have NUMBER: = 1;
BEGIN
OPEN a_cur;
LOOP
EXTRACTION a_cur
IN r_emp, r_dept;
EXIT WHEN a_cur % NOTFOUND;
dbms_output.put_line (i);
i: = i + 1;
dbms_output.put_line (r_emp);
dbms_rlmgr.add_event (rule_class = > 't_alia',)
event_inst = > r_emp,
event_type = > 'employees');
dbms_rlmgr.add_event (rule_class = > 't_alia',)
event_inst = > r_dept,
event_type = > "departments");
END LOOP;
END;
But I got the following error
SQL > DECLARE
2 r_emp ROWID.
3 r_dept ROWID.
4 a_cur CURSOR IS
5. SELECT emp. ROWID, Dept. ROWID
6 employees OF ministries dept (IEM),
7 WHERE emp.department_id = dept.department_id;
8 I COMP: = 1;
BEGIN 9
10 a_cur OPEN;
11 LOOP
12 FETCH a_cur
13. IN r_emp, r_dept;
EXIT 14 WHEN a_cur % NOTFOUND;
15 dbms_output.put_line (i);
16 I: = i + 1;
17 dbms_output.put_line (r_emp);
18 dbms_rlmgr.add_event (rule_class = > 't_alia',)
19 event_inst = > r_emp,
20 event_type = > 'employees');
21 dbms_rlmgr.add_event (rule_class = > 't_alia',)
22 event_inst = > r_dept,
23 event_type = > "departments");
24 END LOOP;
25 END;
26.
DECLARE
*
ERROR on line 1:
ORA-06550: line 1, column 36:
PLS-00201: identifier 'AAAVN9AAEAAAQH8AAA' must be declared.
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at "EXFSYS. DBMS_RLMGR', line 974
ORA-06512: at line 18 levelHello
ROWID for individual tables can be added as events only if the rule class is set up as a Composite. For all other cases, ROWID is treated as data and they need to be formatted as a string of instances of AnyData or name-value pairs. Your script is to think that you intend to create a composite rule class while you might add ROWID individually. If please, recreate the rule as a composite class and try again. The error message you received is incorrect and has been corrected to indicate that the error is with the format data point past.
Hope this helps,
-Aravind. -
How can I update the table table of contents for the sub condition?
Hi guys,.
I have a custom table that must be updated in a table source 'abc ';
I have to update 8 fields of 'abc', based on five keys corresponding between custom and abc records
Here is the syntax I have a suite please let me know the effective way to do this.
I get the error message for the syntax below. I think that 'FROM' keyword must not be use GTA?
update of custom table one
Set a.field1 = b.field1, a.field2 = b.field2, a.field3 = b.field3
ABC b
where value = ' 05 "
Hello
Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.
Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.
If you ask yourself on a DML statement, such as UPDATE, then the CREATE TABLE and you post instructions INSERT must re - create the tables as they are to the DML, and the results will be the content of the or a modified tables when it's all over.
Simplify the problem as much as possible. For example, if your real problem involves 8 columns, try to post an issue affecting only 2 or 3 columns.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).
See the FAQ forum: Re: 2. How can I ask a question on the forums?
2766124 wrote:
Hi guys,.
I have a custom table
What is a custom table? How is it different from a regular table?
that must be updated in a table source 'abc ';
I have to update 8 fields of 'abc', based on five keys corresponding between custom and abc records
Here is the syntax I have a suite please let me know the effective way to do this.
I get the error message for the syntax below. I think that 'FROM' keyword must not be use GTA?
update of custom table one
Set a.field1 = b.field1, a.field2 = b.field2, a.field3 = b.field3
ABC b
where value = ' 05 "
An example of the correct syntax for the use of a subquery in an UPDATE statement is:
UPDATE one
SET (Field1, Field2, Field2) =
(SELECT field1, Field2, field3
ABC
WHERE value = ' 05 "
);
This is a correct syntax, but I don't know if this will do exactly what you want, because I don't know exactly what you want.
FUSION is often easier and sometimes more effective than updated.
-
Update the table of contents (Cp7)
Hi all
I found that when I try to uncheck the slides that I don't want to not show in the table of contents (about 190 slides in the 200 in a project) Captivate crashes with a fatal mistake and I lose any unsaved work. I had to uncheck about 10 boxes at a time, close the table of contents and save but it is very time consuming. Is there a way to uncheck all of the slides by default and select just those I want to appear? Y at - it a fix for the bug fatal error?
Thank you
Cindy
Hello
Welcome to the Adobe Forums.
Make sure you have you CP 7.0.1 update installed
You're on MAC or Windows?
It happens with a specific project or a sample as well
Any similarity between the slides that you do not want to display in the Table of contents?
Thank you
Vikram
Adobe support
-
Copy the Table Alias for a database of the ASO
Hi all
I use the Essbase Version 11.1.2.0.
Is it possible to copy an alias of an ASO cube table to another table aliases of the same cube with MAXL?
I know how to do it with EAS, but I don't know how to do with MAXL.
I already tried this-> edit the 'HR_SB' object.' HR_REP'. ' Default 'type table_alias copy to 'HR_SB'.' HR_REP'. 'Alias_HFM'
This copies the ALT file in the directory "applicationname\database". After that, you need to import this file in the database. It's easy to do in the admin console but I am facing some problems with maxl.
I used the command:
change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of charge of data_file ***\\HR_SB\\HR_REP\\HFM.alt table_alias
I get the error message: / * Alias [Alias_HFM] already exists for the HR_REP database * /.
So I tried to unload the table before loading:
change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of unloading table_alias
-> error message: / * dynamic aliases drop table is not supported in page outline mode * /.
I have no idea what it means - any ideas?
Perhaps it does not work for ASO cubes?
Thank you, BerndTry this after copying table alias
change dabase 'HR_SB'.' HR_REP' table active alias 'Alias_HFM '.
-
Form doesn't work after updating the table
I did a form and that you added prior insertion for the block trigger. And the form works perfectly well without any problems.
Two new columns have been added to the table and must be added to the form now.
I opened the block of data in the form wizard and made an update of the table to get the two columns. After I pressed on the "refresh" and then tried to launch the form (but has not added new columns), the trigger for prior insertion fails and begins to throw me an error that the value must be entered. (FRM:40202)
After further analysis I also discovered that there is a null value is passed into another element. In fact when I update the Datablock Assistant I see this column on the left side to be present on the right side.
Kindly if you could help on the same.Guy wrote:
Details: I just start the form. The error appears in a pop-up window as soon as the form application opens (without any input from me)Hello Guy
Pls check if you have a TIME-NEW-FORM-BIFURCATION, PREFORM, etc an EXECUTE_QUERY;
If so, then this is the reason for the error arise...
Please note: all lines with null, associated with the two old columns will cause the error
Action: insert a value for columns NOT NULL...
I hope this helps...
Kind regards
Abdetu...
Maybe you are looking for
-
Portege R700: How turn off WLAN when the connection to the local network is available
Hello I am the owner of Portege R700, with Windows 7 x 86.I want to find a way to disable WLAN automatically when I plug Ethernet. I tried to enable the following setting: "Device Manager", "Network Adaptaters", "Broadcom 802.11n", 'Advanced', 'Disab
-
Satellite L300-29R - monitor flickers on and off voltage at startup - Vista
Salvation of Brussels, After turning the computer when the desktop icons are already visible and the background photo as well, the screen flashes black for about 1 second each time. Then it stabilizes and things "seem" normal work.But then again, I'm
-
If I close my browser, I have to connect again to hotmail next time I check my emails.
I have to connect to hotmail every time This has never happened before, and it lasts for a week now. If I close my browser, I have to connect again to hotmail next time I check my emails. I see other people are asking the question, but when I click o
-
How to use 6009 to taste in the background.
Hello I use a card DAQ 6009 to do several different things in a routine. Most of the time the while loop is resumed talking to a sensor on the lines digital (about 1 second per iteration). At the end of this, I need to recover some data from 2 analog
-
Medic Player will not work. C00D1 error message. Cannot read anything.
Media Player does not work, gives message C00D1199. Cannot read file due to error. Also called whennot lights up but does not play.