Update the values of a specific attribute to all user tables?

Similar Questions

• Oracle apex 5.0: not update the values in the Collection.

  Hello again,

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  All of the Suggestions!

  Thank you

  Pranav.

  Pranav.Shah wrote:

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  The "coll update" process fails with a ORA-01403: no data found error. This happens in line 11 because of the access attempt to the wwv_flow.g_f01 using the variable array subscript c who has been incremented beyond the size of the table, which is now smaller because of the IR filter applied.

  begin declare
    c pls_integer := 0;
  begin
  for c1 in (
    select seq_id,c001 from apex_collections
    where collection_name = 'MATRIX2'
    ) loop
  c:=c+1;
  apex_debug.message(c);
    apex_collection.update_member_attribute (p_collection_name=> 'MATRIX2',
    p_seq=> c1.seq_id,p_attr_number =>'2',p_attr_value=>wwv_flow.g_f01(c));
  
  end loop;
  end;
  end;
  

  I agree with fondant tabular forms on interactive reports, but you can meet your requirement as follows. In your application, see page 2.

  1 Add a column of form element hidden IR containing the sequence number of collection:

  select
      c001 col1
    , apex_item.text(2, c002) col2
    , apex_item.hidden(1, seq_id) seq
  from
      apex_collections
  where
      collection_name = 'MATRIX2'
  

  2 place the question of the hidden form in the report using the COL1 Expression HTML attribute:

  #COL1##SEQ#
  

  3. change submit to the process if it is driven by the subject table, not the existing collection:

  begin
  
    for i in 1..apex_application.g_f01.count
    loop
      apex_collection.update_member_attribute(
          p_collection_name=> 'MATRIX2'
        , p_seq=> apex_application.g_f01(i)
        , p_attr_number => '2'
        , p_attr_value=> apex_application.g_f02(i));
    end loop;
  
  end;
  

• Help! Try to update the values of Member - but does not (completely).

  We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.

  Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").

  The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.

  Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?

  relatively small cube BSO, Account (dense).

  Here is the rule of this task running

  SET CACHE HIGH;

  FIX (& those 'Forecasts', 'the current iteration","F_00000");

  "56400")

  IF (@ISMBR (& NextMonth: "Dec"));

  0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");

  ENDIF ;)

  ENDFIX;

  -followed by a calc all

  I expect to update all occurrences 56400 in the fix above...

  Thanks in advance!

  Himanshu-

  You probably need...

  UPDATECALC OFF SET;

  .. Smart calc or .in there will prevent 'own' blocks to be recalculated.

• Update the value Table B if table A the value of different

  Hi all
  I'm using Toad for Oracle and need assistance with a trigger. I have two tables tables A and B Table with some of the same fields. I want to only update the values in the array B, if the values in table A are not equal values in table B table A update. Don't update the record where the primary key of the Table equal to the foreign key in the Table B. I have a sample script below, I hope someone can give me an example, I can develop and test. Thanks for reading also.

  CREATE OR REPLACE TRIGGER AU_Table_A
  AFTER UPDATE ON Table_A
  FOR EACH ROW
  BEGIN
  If Table A :old.value != Table A :new.value
     then 
     update 
  --Update Table B value with Table A updated value
     Table B :old.value = Table A :new.value 
  where Table A primary key = Table B foreign key
  ............
  END IF;
  END;

  Published by: Nikki on December 6, 2011 07:50

  Hi Nikki,

  If I understand correctly, then maybe

  create or replace trigger au_table_a
    after update
    on table_a
    for each row
    when (old.value != new.value)
  begin
    update table_b
    set    table_b.value = :new.value
    where  table_b.foreign_key = :new.primary_key
        and table_b.value != :new.value;
  end au_table_a;
  /
  

  Note that the solution is not trying to handle NULL values. If you have NULL in to either A or B, we have to manage those specifically

  Concerning
  Peter

• update the value of the column to the next value

  Hi all

  create table xxc_test (date of from_date, to_date date, amount, number incr_amount);

  Select 2014, 2015, 3000, the double null

  If suppose if input data in the incr_amount then let say 1000 I want to update the value with incr_amount column amount

  Select 2014, 2015, 4,000 of the double

  If not even though it is as

  Select 2014, 2015, 3000, the double null

  and must be updated to the year

  Note: I spend the year, amount,incr_amount manually (run-time)

  Post edited by: Rajesh123 Note added in the subect

  Hello

  : new.incr_amount: = 0; also use it in code.

  The condition " If : new.incr_amoun is > 0" then (sure fire or change the value only if the increment is positive. ).

  ,....

  ..
  

  end if;

  
  

  -Thank you

  Pavan Kumar N

• How update the values in ValueChangeEvent...

  Hello world

  I use Jdeveloper 11.1.2.0.0.

  I have a scenario as follows. I have 2 fields like password and Confirmpassword.

  I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.

  But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.

  
  

  The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.

  
  

  In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  
  

  But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.

  
  

  Concerning

  Leprince
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hello

  Change the scope of the bean to viewScope.

  Kind regards

• How to update the value of a value in a table

  APEX - 4.1.0.00.32
  Version of DB - 10 g
  Web - OHS server architecture
  Browser - IE8
  Theme - 9
  
  Hello
  
  I have a tabular form and I want to update the value of a field using a process based on an add-on.
  
  the name of the column in the form of tables is (name of column P22_PROJECT_ID)
  
  The error I get is
  
  ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
  
  Error unexpected, unable to find the name of the option at the page or application level.
  
  The field is questioned as
  
  Select pt.project_id P22_PROJECT_ID
  
  The code I'm trying to use in the process is
  
  : P22_PROJECT_ID: =: P10_PROJECT_ID;
  
  I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
  
  Any help would be appreciated.
  
  Thank you

  the tables for is on page 22?
  the project in page 10

  I think you go to page 22 page 10
  Create a new item in page 22 as p22_project_id
  Since 10 passes as a parameter the page p1o_project_id and set p22_project_id

  by default as p22_project_id

• Update the value of DataGrid

  I have a request - it can be found at http://reactorsoft.ath.CX/projects/Cygnus_v1/Cygnus_v1.html If a reference is required.

  In this application, I have a DataGrid. What I want to do update the rightmost 3 columns based on the data entered in the Act. Column of gains. Ideally, this will be row-by-row.

  The problem I encounter is that the value in the DataGrid control is not updated quickly enough when the itemEditEnd event is raised. If I return to this line and update the value is entered, the old value will be recovered. How can I work around this problem?

  In addition, another problem I encounter is that the triggerEvent itemEndEdit event value is not give me a value. This is supposed to tell me if the installation has ended due to a mouse event or keyboard. It is also essential to what I'm trying to accomplish.

  Can anyone provide me with an isight in this? It will be very much appreciated.

  A tip: use the method callLater to ensure that the dataProvider has been updated:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"creationComplete =" init () ">"
     
          Import mx.events.DataGridEvent;
  Import mx.collections.ArrayCollection;
             
  [Bindable]
  private var dp:ArrayCollection;
             
  private function init (): void
  {
  var da: Array = [{id: 1, amt: 0, c1:0, c2:0}, {id: amt 2: 0, c1:0, c2:0}];
  DP = new ArrayCollection (da);
  }
             
  private void calc(evt:DataGridEvent):void
  {
  var currObject:Object = [evt.rowIndex] dp;
  currObject.c1 = currObject.amt * 2;
  currObject.c2 = currObject.amt * 1.5;
  }
  ]]>
     
     
         
             
             
             
             
         
     
     
  

  Hope this helps,

  Dany

• Refresh the components within a specific line of an af:table programmatically

  How do I refresh the components within a specific line of an af:table programmatically without refreshing the entire table? _
  
  I have an af:table to display a view read-only object. There is a button change in the table by calling an af:popup, where the user can update the information and click on a submit button to commit its changes.
  The action of this button property is a method in a holder in the summer where
  -1: a stored procedure is called to update several tables (related to my read-only VO).
  -2: the VO is re-interviewed (refreshQueryKeepingCurrentRow() VO.)
  -3: updating of the whole table (AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable))
  
  Is it possible to programmatically refresh some components of the current row in the table without refreshing the entire table (point 3)?
  
  I tried to play with the property "partialTrigger" to af: outputText (table: column: outputText), without success.
  
  Thank you
  
  Nicolas

  OK, that's a very clear answer, thank you.

  Now, first do a little optimization:

  if(!StringUtils.isStringEmpty(results) && results.equals("TRUE"))
  // should be
  if ("TRUE".equals(results))
  // since it's faster, simpler and requires one less dependency
  

  For your use case, you can say you want to always refresh the line, then you could link the table in your backing bean, retrieve the selectedRowKeys and then set the key for the current line on the model in the collection before adding the partial target. So, something like:

  Set