Update the VCs x8.1

Similar Questions

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok

• VCS - C to the VCS-E to manually start the SIP connection

  I have the connection of VCS - C to VCS - E works correctly VCS - C is on the local network and VCS - E is on the demilitarized zone. I'm trying to firewall configuration that correctly based on the documentation. When I add some rules he interrupts the area SIP connection. I have to remove the rules, then restart the VCS - C to get the box to connect again. Is there a way to make the box try again the connection without having to reboot? Yes, I'm a noob to this, forgive me if the terminology is not correct.

  Fur

  The VCS - C must always try to connect again. Maybe its your firewall / nat between the two

  who behaves strange here.

  In general, if you allow outbound communication of c with the e and the answer to

  You should be fine.

  Best regards, forcing the reestabishment of the connection, you can go to the client area of course

  on the vcs - c, set the sip to off mode, save, enter the updated area again, set it to the suite and save.

• My computer always tells me to update the Pages, but when I go to the App store, it will not be updated, I just get the spinning wheel.

  My computer tells me every day to update the Pages, but when I go to the App store (where I bought it) and click on update, I just get a spinning wheel.

  The specific version of Mac OS X (Apple logo: about this Mac) and version specific Pages (Pages: pages) will prevent us from guess.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• Updated the Imac to my wife to OS10.  Now have e-mail problems.

  Updated the Imac to my wife to OS10.  Had difficulties in obtaining the post to work.  Once I got it work keep changing to the old password.  We go to the system setting and correct the password for Internet.  Then, we go to the accounts and correct password.  The mail has been working for about 24 hours.  Now she can not sent and passwords will not be at rest.

  What is happening with this Apple!  I use to be able to count on everything works correctly without a bounch of workarounds. You're quick soaking in the quality of Microsoft.

  DDoes this works if you use the customer web email providers?

• Why people of Iran can not download or update the application?

  Why people of Iran can not download or update the application?

  What app?

• Queries continued to update the password by e-mail

  Since the upgrade to El Capitan, I get repeated requests to update the password on my main email account. The password I am entering my account of TWC Roadrunner IS accurate, yet he says that he does not recognize. If I connect via webmail, it works very well. I have a software problem. If anyone else has experienced this?

  As I recall there is a bug. What you have to do is to go to e-mail accounts and select the account. Simply enter the password and close the window. This method works. but months from now, you will have to do it again.

• Update the carrier settings

  Hello

  I'm trying to unlock my old 5 c of 3. It was purchased before January 2014, so it has not already been unlocked. I downloaded the latest version of itunes, restored and software, then was propmted to update the carrier settings, I did, but it always tells me new SIM is not supported. Any ideas?

  You should contact your operator.

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• Could not update the new version of WhatsApp on my iPhone 6

  Hi all

  Problem: I'll update the whatsapp application, but the window asking you to connect with the Apple ID and my ID apple is screenshot below!

  But while I'm clicking the butto, its deferens apple display updates ID;

  But it's not my Apple ID and I don't know the password as well. This apple showing only to WhatsApp application, update time remaining applications showing ID my ID Apple; screenshoot for referance below! Please tell me how to remove this Apple ID and how can update WhatsApp with my Apple ID application, thanks.

  < images edited by host to remove personal information >

  There is an easier way.

  Remove the application and then re download from the App Store. That will install the latest version.

• How can I update the location in Photos?

  I'm trying to update the location of my pictures.  I can change it under "Info" in the menu of the window (set the PIN on the map) and that works fine, but when I go to the Image menu and then click on setting Date and time, and then change the time zone on the coast is where I live in California where I took the photo, choose San Diego in the dropdown selection menu it It's default back to Los Angeles after that I click on Adjust.  How can I get the city to stay on my choice?

  Tthat selection has nothing to do with the location, it's for setting time tags on the photos, zon hour option moves both the appropriate amount.

• Can not update the settings on the Airport Express

  Currently have a facility - two extremes and an Express network.  I for the life of me can't update the Express settings. I always get an error message but I can update the settings on the two extremes very well. I can make changes to the Express with my Iphone but I can't with my Imac.  I want to activate the function of 5 GHz but I can't do that via my Iphone - with the desktop app I think.  Can someone help me?

  Let's first check and make sure that on which Airport Express version you have.

  Your version of the AirPort Express is there only 1 or 2 Ethernet ports?

  The Express to connect to your network and extend it wireless?  Alternatively, the Express connects to one of the extremes airport using a wired Ethernet cable connection.

  Then, I would be not too concerned of not being able to 'see' the Express of the iMac as long as you can access the settings of the iPhone. You can make almost any change using the iPhone you can use a Mac.

• I want to update the verson using celluler data how is possible

  I want to update the verson using celluler data how is possible

  WiFi or iTunes > update the iOS on your iPhone, iPad or iPod touch - Apple Support software

• Projection Shockwave Flash as v16.0.0.287's plugin check but he updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the situation.

  Shows a check as v16.0.0.287 Shockwave Flash plugin, but it updated the current 16.0.0.305 and restart Firefox (v36.0) do not change the version number or status when rechecking the plugins. Control of Adobe and the Flash Control Panel website confirms 16.0.0.305 is installed. All the solutions to this?

  I noticed in the information in the topic: plugins page under Shockwave Flash, path: line was showing.

  < path: C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_287.dll,C:\WINDOWS\SysWOW64\Macromed\Flash\NPSWF32_16_0_0_305.dll >

  For outdated version 287 .dll file was still there and listed before the current version of 305. I deleted the 287 .dll version and restart Firefox and check the plug-ins again the problem seems to have been resolved.
  Greetings - Spindrift