VCS - C to the VCS-E to manually start the SIP connection

Similar Questions

• VCS with Mu - Law when the SIP media processing

  Hi guys, I have a very specific behavior.

  A customer has problems to integrate a VCS Starter Pack X7.2.1 with an Alcatel PBX with a SIP trunk.

  The problem is:

  This PBX is in Europe, so that it uses A - Law (they can´t change this).

  When a dial an extension using H323 as protocol endpoint, I can force the Protocol G711 A - law on the trunk SIP (generating SDP interworked), but when that point of termination (C20 runningn TC5.1.4) using SIP, the PBX Don t accept a p2p support. It must be mandated by the VCS.

  If force us the media through the VCS (by using encryption B2BUA or SIP Lock Mode), the codec negotiated btw VCS and endpoint to the title of this first step is G711 Mu - Law (PCMU) and the accepted PBX codec is PCMA, causing a shift and a loud noise in the call.

  No idea if we can force or configure VCS to use G711a as the Protocol when a SIP - SIP call with stream media through VCS?

  PS: I think that this isn't a problem in the United States, because they use the Mu - Law encoding.

  Thank you

  Can you put a cap set the filter on the endpoint at all?

  xConfiguration Experimental CapsetFilter: "G.711mu"
  
  

  Thank you

  Guy

• Change caller id / name of the SIP URI of VCS calls

  Hello

  I have clusted CUCM 9.1 with a SIP to a VCS - C trunk.  When making calls, the calls show a caller id of [email protected] / * / address, for example [email protected] / * /.  I have a configuration URI directory on the phone that generates the call, but now it shows the URI.  Incoming calls from SIP URI properly.

  Thank you

  Hello

  On the trunk SIP for VCS, under outgoing calls, there should be an adjustment: vocation and connected part format, change it to URI deliver only partially connected. Also, under the profile SIP assigned to the SIP trunk to VCS, there should be a setting use entirely field in queries, check this box. The SIP profile should also be attributed to the device SIP calls.

  HTH, if yes, please rate.

• Can I use my printer manually instead of using the wireless connection?

  Can I use my printer manually instead of using the wireless connection?

  cbg_37 wrote:
  

  It is an OfficeJet Pro 8610.

  Hello

  It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:

  

  Kind regards.

• How to manually start the FSX helicopter?

  I wonder if you folks can help understand me how 'manually start"the engine of the helicopter? There are a few nice start wav files in the sound folder, so it seems to me that they intended to allow us to start the engine of more realistically than the method "instant on" using CTRL + E. But I can't figure out what keys that will allow more realistic start? Using CTRL + E never plays the sound file to start more realistic which is there.

  I tried to use J then the + key but that just zoomed in when you use the external view F11.

  Hello
   
  I suggest you post this question in the forum games for windows .

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How do I create a pause between songs in my playlists? Manually start the next song?

  How do I create a pause between songs in my playlists?  Manually start the next song?  I use XP with WMP11

  The following freeware will allow you to add as much
  (1 to 100 seconds) pause between tracks that you need:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

• The manual says I can connect speakers or headphones to my headphones Jack (SVF15A1).

  My VAIO SVF15A1 has a headphone jack (I guess that's a tip-ring-ring-sleve SOCKET configuration).  The manual says I can connect speakers or headphones to this Jack, but the speakers and headphones usually have the usual configuration of TRS stereo (less unique ring on the plug).

  I'll damage my laptop by plugging the standard TRS headphone into a HEADPHONE jack?  Remember, headphones and speakers do not have a microphone.

  One web site says that a TRS jack will be short the microphone and the ground, but does not hurt.

  Here is a picture of what I'm trying to describe.  The iPhone headphone cable is similar to the Sony headphone jack configuration

  

• Question about components entering the SIP/h.323 and SRV

  We have our VCS - E put in place for entrants and outbout call to the internet.  We have an SRV record for SIP and H323 audience.

  The SRV record lists the SIP/h.323 services for ourdomain.com, redirecting to video.ourdomain.com.

  I have some problems however;

  When testing with a client of Polycom that does not work with SRV or that has a different implementation of it, we have to deal (alias) @video.ourdomain.com.

  When you use Cisco Jabber (free), it only works when you dial (alias) @ourdomain.com but don't touch our VCS-E at all when you dial (alias) @video.ourdomain.com.  We can compose (alias) @our-public-IP of Jabber OK.

  Cisco Jabber doesn't use regularly debriefed if SRV is not available?

  Optimally all would support SRV, I have to accept that some people that we connect will not support it and I would like to be able to give the same dial in URI to everyone.

  Do I need to register an SRV record for video.ourdomain.com (I don't know yet if we record SRV for subdomains)? Or if I want the same dial in details any material they use, I have to give @public-IP (aka)?

  Cisco 'free version' never took in charge a record search as far as I know.

  The only reason for which you can use on the version "on-prem" is because the VCS-E can be configured to do this, not the customer.

  To ignore completely the DNS and the support of all comers, you will indeed give [email protected] / * /-E_IP_address, that said, as far as H.323 goes you will get a few old systems or systems with the old firmware, Polycom Polycom and LifeSize that only support ip_address ##Alias - so a transformation should be put in place to allow these establishments.

  And Yes, you can configure an SRV for subdomains.

  /Jens

• I can't make call between Tandberg C60 using the Sip Protocol

  Hello

  I tried to call between Tandberg C60 codecs with the SIP ends, unfortunately the call failed to connect. His poster is not the message "connecting" either.

  Then I changed in the Codec c60 (both sides c60) H323 Protocol, then call connects and works well.

  Please any idea.

  Thank you.

  Kind regards

  Henri El Salvador

  ==========

  VCS ver: X7.2.1

  TANDBERG Codec C60;

  Codec1: TC4.2.4.296355

  Codec2:TC4.2.4.296355

  You can't just dial the SIP with an IP address only - that is not a valid format of SIP.  There must be a [email protected] / * / or [email protected] / * / (IE [email protected]/ * /) format.

  In your example above, you should be able to dial '[email protected]/ * / "or"[email protected]/ * / "-these two are valid SIP addresses.  The right 10.88.17.5 the IP address is not.

  PS - As mentioned by Patrick, you really should upgrade your software on your endpoints to a newer version.  There is a security notice that should help you get the new software, even without an active service contract: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140605-openssl

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• How automatically dial the internet connection in the browser firefox to start the browser in internet Explorer

  I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps

  Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
  create this connection, I must provide the user name and password provided by the ISP.

  I have to dial internet connection manually after the modem set automatically connect to the local network
  I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
  is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?

  and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.

  The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:

  Windows Control Panel > Internet Options > connections or
  
  Internet Explorer Tools menu > Internet Options > connections

  "Dial whenever a network connection is not present"

  Source: How to make Firefox automatically dial up

• Completely disable the "Untrusted connection" dialog box

  I am a professional developer stuck behind a proxy at work. The behavior of this power of Attorney causes the SSL connection attempts get a certificate signed by my company, not the web site I try to connect to. I have no control over the proxy, so change this behaviour is out of the question.

  I need to use Firefox for a number of things and am generally fine adding exceptions for sites that I want to connect. However, some sites like github.com loading resources many other areas via SSL (CDN, Google Analytics, Gravatar, etc.). For these sites, I try to add exceptions in order to allow the company a signed, cert but I can only add to github.com, not any other sites, so even after adding an exception I'm brought back in the right to the page "this connection is untrusted". No matter how many times I try to grant a waiver, I never really get to github.com.

  Other browsers on my system are administered remotely and seem to be configured to automatically trust signed certs society. I need to know how to manually configure Firefox to always trust these certificates OR never shows me the unreliable connection dialog box and just maybe show red in the address bar when he does not trust the site cert.

  Apparently in OS X, there are at the level of the authorities of certification system. I don't know why it does not use Firefox, but I was able to export the CA company and import it in Firefox. Finally solved my problem.

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Toshiba software conflicts with Microsoft and prevent the wireless connection

  The Toshiba Software on this laptop I have is causing a conflict with Microsoft software and I can't connect wirelessly to an ad - hoc network. Wireless Auto configuration does not automatically start as Toshiba Software is causing a conflict, above, this rolling. If you have also encountered this problem please can you me what you can do to permanently solve this problem? For the moment, I have to go through a process of manually start the Wireless Zero Configuration services and fiddling around with disable and then re-enable wireless network connections if I'm lucky then it finally works, and I have internet! If you are unsure how to permanently solve this problem you know what the telephone support number is for Toshiba UK?

  Thank you very much

  John

  Hello John

  What model of laptop and operating system are you using?
  Do you use the preinstalled original Toshiba OS?

  If you want to talk with Toshiba Toshiba s call hotline in the United Kingdom. The number is on the Toshiba UK support page.