Update Win10 and RAID 0 on a S7-392

Did the update of Windows 10 on a Aspire S7-392 maintains the RAID 0 works correctly?

Should be, IIRC the RAID0 is handled on the SSD module, not by external hardware or software drivers. In other words, that it should be transparent to the OS compleely. I suggest you make sure you have the current BIOS installed and, of course, the latest OS and driver. Backup the system then go for it!

Tags: Acer Software

Similar Questions

  • ESXi 4.1 update 1 and Raid 3ware 9550SX card

    As the title says, I'm trying to get a raid 3ware 9550sx card work with ESXi 4.1 update 1.  I tried to load the drivers from the card via the CLI and in the end, received a message "host not was not updated, no change not required.  Newsletter from skip AMCC_2.26.08.035vm40; It is installed or obseleted. »

    However, when I try to find the raid controller of adapters for storage, the VIClient Configuration tab, I don't see it.  I do something wrong, is the driver included in this version of ESXi (I'm on a new installation started from a USB key) or is there another step after installing the driver I am skipping until I can see the map and use drives connected to it?

    Thanks for any help,

    Ryan

    Well, I have work.

    Here's what I had to do:

    Follow the instructions here free: http://kb.lsi.com/KnowledgebaseArticle15548.aspx

    They are a little dated, but they get the essential overall.

    He suggested significant changes to the CLI:

    Add a c - to order.

    So, I found myself running:

    C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vihostupdate.pl perl-Server x.x.x.x - root username - password rootpassword - b D:\Sandbox\3ware\offline-bundle.zip-i c

    Regarding the out-of-line-bundle used: take the file listed for the 9550 for ESX(I) non - here: http://kb.lsi.com/KnowledgebaseArticle15753.aspx#vmware

    There should be a link to VMware_noncertified_ESX_and_ESXi_4.0_GA_4.0_u1_4.1_GA_4.1_u1_driver_and_twcli_for_9500s_9550sxu.zip

    Inside, it is a 3w - 9xxx.iso (a tw_cli)

    the off - bundle.zip extracted the ISO and use it.

  • OfficeJet Pro 8600: Unable to connect printer OfficeJet after update Win10

    I had my Officejet pro 8600 perfectly connected wireless to Win 7 for several years.

    After the update to Win10, I am unable to connect to the printer. The printer status shows that driver is not available.

    I checked Win10 and Adobe by other suggestions from the forum. both are up to date with the latest version.

    I uninstalled and reinstalled the printer Win10 driver and the download driver HP. None succeeded.

    Run the convenience store Win10 shows that the print spooler cannot be started. He is set to start automatically, but is currently stopped. I can not start it manually, and it does not start after a reboot.

    The fixed! I found the following information on a page of the Microsoft Help forum:

    Thanks to http://www.registryrecycler.com/blog/2013/12/how-to-fix-printing-error-in-windows-8-1/ for the fix.

    Apparently, the Windows 8.1 updates had the same problem.

    Editing the registry is necessary. Make sure that you have a backup of the registry before making changes.

    • Press the keys Windows + R on your keyboard to open the run box.
    • Type regedit in the box run and press Enter to open the registry editor.
    • Confirm the UAC message by clicking on the Yes button.
    • In the left pane of the registry editor, expand HKEY_LOCAL_MACHINE to find the key below.
    • SYSTEM\CurrentControlSet\Services\Spooler.
    • While the spooler key is highlighted, you can navigate the right pane to assign the value DependOnService.
    • Double-click the string value to change the data.
    • The data in the value field should contain the text saying RPCSS, followed by http in the next line.
    • Select and delete the letters http and click OK to save your changes.
    • Leave the part of RPCSS to the value data as it is written.
    • Close Registry of Windows and restart your computer.

  • Update Win10

    Cannot update 8.1 win to win 10 on an S7-392. First a BSOD saying PC should restart and msg 'KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQ '. Then win 8.1 is restored and show msg error C1900101-40017. All the updated drivers before trying to update win10. How to solve this? THX.

    Solved. I forgot to upgrade the Bios. After that, everything worked well. THX.

  • with Win10 and my new laptop

    with Win10 and my new laptop, not able to install Adobe PhotoShop 9... message action... must be installed... excuse me, but I'm french and I try my bets.

    Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

    -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

    - so if you have an older program, update you to Windows 10 at YOUR risk of problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Problem of ESXi 5.5 and RAID

    So I have an ESXi host and RAID problem with a motherboard for Intel Server S1200V3RP. Basically, the problem is that the 5.5 ESXi host is not recognizing the RAID array set up with the utility integrated. See the images below for what I mean.

    Click here
    Click here
    Click here


    I did some research and my research has pointed out to me the possibility that this on the Intel Server raid controller is not actually a hardware controller but a piece of software built using the computer as controller. My research basically tells me that ESXi is super picky and don't play well with fake RAID. Although I may be wrong on this subject the behaviour of ESXi and each site Web I found says that this may be the case. I tried integrating storage and RAID drivers in the iso ESXi, I tried to update the BIOS chipset with the deployment server disk, and the management and I tried a USB installation with the drivers but nothing seems to solve this problem.

    Since ESXi does not the table as something other than dedicated disks, I tried an inventive work around by choosing the AHCI BIOS and install ESXi 5.5 mode host on a dedicated disk (volume 0). Then I switched back to RAID and used the Intel Rapid Storage Management utility to configure a RAID5 to three remaining disks. It seems to work very well and I was able to access the vsphere ESXi environment. However I couldn't see the RAID volume again on vsphere storage.

    I've plotted a plan where I could load the drives as individual data on the host and virtual server stores use the disk management utility or another program for RAID 3 hard drives together so that they appear as a single volume. However when I booted the system upward it appeared that the integrity of the RAID5 degraded after the addition of each drive separately (probably because he had to load a VMFS on each disc, thereby breaking the table). So this probably won't work (and even if it's possible, it's probably unnecessarily complex).


    Click here


    So yes, I don't have really a clear idea of the place where to go to get the RAID controller integrated to be read by ESXi. I was told that there may be compatibility issues between VMware and my Intel server model, but I checked and its on its list of approved so compatibility it couldn't be her. I guess I could just stick with dedicated drives and load the HARD drives as data stores, and then use software RAID across virtual machines - but I am concerned about the way in which redundancy will include when we drive finally fails (could I just Exchange on as a hardware raid?). I always thought that software RAID (especially on windows server disk management) smb read and write speed is terrible compared to hardware RAID.

    Anyone know a solution to this problem or where I could go from here?

    I did some research and my research has pointed out to me the possibility that this on the Intel Server raid controller is not actually a hardware controller but a piece of software built using the computer as controller. My research basically tells me that ESXi is super picky and don't play well with fake RAID.

    ESXi is not 'super picky' here. This kind of fake-RAIDs that are so common on desktop PC motherboards and entry-level rely on specific drivers provided by the hardware vendor to work really. And suppliers basically only provide Windows drivers in the first place. Any other non-OS Windows would be faced with the same question. Try installing a Linux and that you will not see your RAID volume either.

    Yes, your motherboard does not use a real independent of hardware RAID but a cheap RAID/fake-software controller. See the Intel website:

    http://Ark.Intel.com/products/71385/Intel-Server-Board-S1200V3RPS

    RST (0,1,10,5) RAID and ESRT2 (0,1,10) RAID Configuration software

  • Updated iTunes and iOS and iPad Air no longer appears in iTunes

    Just updated iTunes and my iPad air no longer appears in iTunes.  Update of iOS on iPad and no change. iPad appears in information system as a USB device connected. Ideas?

    FWIW, my iPhone updated 6 Sy - the problem is only with my iPad Air

  • How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

    How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

    It does not work like that. It cannot be scheduled for a specific time.

  • My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

    My site, created using Dreamweaver cs6 shows only partial images.
    He worked until a few days ago when I updated Java and Firefox.
    The URL is j - f - a.com.au

    The images are not entirely loading or do you have other problems?

    You can attach a screenshot?

    • Use a type of compressed as PNG or JPG image to save the screenshot
    • Make sure you do not exceed the maximum size of 1 MB

    I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • I've updated firefox and all my saved passwords have been deleated.

    I've updated firefox and all my saved passwords have been deleated. I have an "old firefox data' folder and read earlier that the logins.json and signons3.txt files can be placed in my new firefox. Does anyone know how to do this?

    There is a new Firefox profile folder created?

    This "Old data Firefox" folder created recently because Firefox creates this file when you reset Firefox?

    See also:

    There are other things that need your attention.

    Your list of details of the system shows that you are infected with trovi.com

    See http://malwaretips.com/blogs/trovi-com-removal/

  • Thunderbird updated yesterday and now nothing is displayed except the toolbars at the top of the page. What should I do?

    My address book is still there, and he has always shown that he downloaded my new messages, but there is no way to access it. The entire screen is white, except for the toolbars at the top. No Inbox, folders, nothing. Guess I should not be updated.

    Well, fortunately, there are search engines. I was able to find an answer on justanswer.com. It was very simple. I just uninstalled the new updated version and reinstalled the old version which worked to oldapps.com. And voila, all my emails, settings, etc. as if by magic.

  • I think that I just had to update Firefox, and was not able to cancel and now the tabs and search for address/bar one too small.

    I had a problem and had to close Firefox. When I opened it upward, it updated automatically and it went too fast, so I had no time to cancel it. Now the tabs, address/search bar and toolbar bookmarks bar are much smaller. Is it possible to change their return?

    You can in fact are not up-to-date. Please update Firefox 31 Firefox updated to the latest version

  • my firefox has been updated yesterday, and since then I can't copy any link in a text of the e-mail, more. I drag the address of the page, but the link does not work. Thank you.

    my firefox put updated yesterday, and since then I can't copy any link from a web page in an e-mail message more to send. usually, I could drag the address of the page and it automatically copied the blue link and it could open. now, it does not work. I use gmail, but I don't think it is related to the post.

    In Firefox, you usually use a string as button in the toolbar all foregoing enamel make up the zone Editor to create a clickable hyperlink.

    Sometimes, it happens automatically if you send the message, but I've never seen this in Firefox when you compose a message.

  • Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

    Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
    If I need to can replace it where I get an older version?
    Thank you

    Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

    The latest support for your operating system version is 3.6.26 , you are fully updated.

    For more information, see:

    Firefox 3.6 system requirements

    Firefox 10 system requirements

    [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

    http://www.floodgap.com/software/tenfourfox/

    http://tenfourfox.blogspot.com/

    https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

    Thank you

    Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

  • I downloaded the new version, but firefox says always that I must update - why, and if there's a step 'install' miss me why are there no instructions on how to do?

    Why Firefox didn't insist that I still use version 3. It doesn't matter when I downloaded faithfully new versions when he tells me to do so-recently version 8. whatever (today). If "downloading" is not enough and there is also a stage of 'install', I still find anywhere in Firefox that tells me how to do. I restarted my computer, but this does not seem to make a difference. He always tells me that I use an outdated version that soon is not supported.

    There are 2 ways to update 1) using the built-in update function and 2) download an install version complete.

    Let's do #2 for now. Go to http://www.mozilla.org/en-US/firefox/new/ and download the exe on your desktop. Closing Firefox. Run the installation program that you downloaded to your desktop. Open Firefox. If you always said you run the 3.6.24 version, your user agent can be spoiled. If this is the case do the following:

    Enter about: config in the URL bar and press ENTER.

    If you see the warning, you can confirm that you want to access this page.

    Filter = general.useragent.

    The preferences that are bold, one line at a time, right-click and select Reset.

    Then restart Firefox

Maybe you are looking for