Updated to the master

Similar Questions

• Updating of the master/detail does not work after the failure of the validation

  After validation of the judgment of the further processing of a page page page master detail, I get the error message Oracle depending on the display of the detail portion:

  < code >

  ORA: 01445: cannot select ROWID, or sample, a view of join without key preserved table.

  ORA-06510-PL/SQL unhandled exception defined by the user.

  < code >

  
  

  Clues as to why this might happen?  The master of the page displays fine as well as the validation error message personalized appropriate. It's just part of detail (from SQL-based report) that is causing the problem.  I use either a ROWID.

  
  

  Thank you!
  

  Just an info for all those who may have this same problem in the future.  I corrected the error and it had nothing to do with the ROWID or views or something like that.  Under the section of Page rendering when you set the definition of the region in the source section, I included the "order by" clause in my SQL statement.  This was the cause of my ORA-01445 error!  When I removed the clause of the definition of the source, and instead included in the attributes report by checking the box of the appropriate column sorting (which allows the apex generate so for me), the error has disappeared!  The error message Oracle NEVER would have given me a clue to what caused the error.  I joined just thinking 'what if I take the order by clause.  What's a flukey fix!

• changes/updates to the master page will not update other pages

  I made some changes to my template and saved.  I went to the homepage and others, and it does not reflect these changes.  It is mainly the size (height) of my page that is not setting...

  In the case where you have reduced the height of the page but the homepage always shows the same height as before, then search for any content on the homepage which does not allow page reduce the size.

  Thank you

  Sanjit

• Notifies students of updates of the master plan of VCP VMware?

  Hello world

  I'm new here so forgive if this question is put to death!

  I'm studying towards my VCP4 certification (self-paced + exam prep classes) and was surprised when a friend told me that the action plan for the course has changed.

  VMware warns members of the community forum of new changes to the action plan and where can I download most uptodate for examination blueprint?

  Also my route chosen (Self study + exam prep classes) will allow to qualify for VCP certification?

  Thanks in advance

  Tayo

  Troy is located on the two sides. VMware don't normally warn people of plan changes, but that does not change often and most of the changes is cosmetic or to repair broken links. The objectives of the review have not changed since the first public version of the VCP4 exam. You will need to attend an official course of vSphere instructor in order to qualify for the VCP certification, you will not be certified unless you do whether or not you pass the exam. I can help get you reserved (e) on a course that by the look of your forum user name, you are based in the United Kingdom, send me an email if you want my help with that: [email protected]

• How do I change the EO master during the updating of the child EO?

  I finished the map marker 'Building a Fusion Web Application' which is pretty basic, and shows that you have to update a master table (COMMAND) and display lines (ORDER_ITEM) child associated with the master file. This is perfect, but of course in the 'real world', you need to update / add items to an order. Naturally, after add/update the table ORDER_ITEMS, wish the ORDER_TOTAL value in the ORDER table to reflect the change. In other words, if you double the amount of one of the elements, the ORDER_TOTAL value in the roll of the ORDER should increase.

  To enlarge the map marker, so I added another page that allows me to update the values in the table ORDER_ITEMS which works very well - it's just out-of-the-box ADF magic. The (Simplified) workflow looks like page 1 of the attached document (masterchile.docx). I tried two ways to update the ORDER_TOTAL in the roll of the ORDER after an add/update to the ORDER_ITEM table.

  (1) change the orderview to include a nested select statement that calculates the ORDER_TOTAL dynamically

  SELECT Orders.ORDER_ID,

  Orders.ORDER_DATE,

  Orders.ORDER_SHIPPED_DATE,

  Orders.ORDER_STATUS_CODE,

  (select order_items one sum(unit_price * quantity)

  where a.order_id = Orders.order_id

  Order_id group)

  AS ORDER_TOTAL.

  Orders.CUSTOMER_ID,

  Orders.SHIP_TO_NAME,

  Orders.SHIP_TO_ADDRESS_ID,

  Orders.SHIP_TO_PHONE_NUMBER,

  . . . .

  (2) add an update to the value ORDER_TOTAL in CONTROL Panel with the workflow after an add/update table ORDER_ITEM and COMMIT.

  setting a day = order_total set commands? where order_id =?

  With or the other solution, I get the same results that looks like this

  I update the ORDER_ITEM table in the editOrderItem.jsff page, the workflow performs a VALIDATION and returns to the page editOrder.jsff, amount ORDER_TOTAL does not reflect change. Hit Cancel to editOrder.jsff back to order.jsff that show the right amount ORDER_TOTAL. Back to order.jsff editOrder.jsff and displays the correct value for ORDER_TOTAL. It seems that the values in the form of the ADF inside the order.jsff are cached and the page refreshes ever against the updates of the database. I tried to do editOrder.jsff refresh by changing the properties of refreshment "true" to "false". Also changed CacheResults of the 'true' to 'false '. Tried to change the flow of "no controller action" task properties to 'always start a new transaction.

  Thanks in advance,

  Rob

  You might get a better answer if you find a space where they discuss your product.  This space is to the Oracle database.  Try to search for some of your keywords, like Fusion.

• I want to install an old version of the Master Collection CS 4 (Upgrade) on my MacBook Pro running out of Yosemite.  I installed this on my previous MacBook which I've now updated since.  I have MS CS4 serial number allotted to me.  I didn't hav

  I want to install an old version of the Master Collection CS 4 (Upgrade) on my MacBook Pro running out of Yosemite.  I installed this on my previous MacBook which I've now updated since.  I have MS CS4 serial number allotted to me.  I don't have my serial number Adobe CS 3 Standard previous allotted to me.  How can I go about installing the Master Suite upgrade without the serial number CS 3?

  Hello Lori,

  You will need to CS3 serial number to install the upgrade.

  You can check the link given to find the serial number of your CS3: quickly find your serial number

  It will be useful.

  Concerning

  Bianka Attre

• Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Please refer to:

  • Download and install apps Cloud Creative
  • Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
  • Download and install apps Cloud Creative
  • Re: Should uninstall us cloud creative cs6 before installing the cloud creative cc?

  Concerning

  Baudier

• Blocks of text on the Pages of body 'Buried' after update of the Page Master

  I have a background full screen on my main page (on the left in this case) that integrates static graphics and borders for certain master pages. I use the borders/boxes for NOTE and END of text on some pages. Blocks of text on these master pages do not overlap. I added text blocks with my icons and the text of the note to these body Pages that I need them. All great so far.

  I decided to update the background chart on page master to change colors, etc.. All files are linked.

  Now, with funds master page updated, these pages where I added text blocks are 'buried' as on a sublayer. I checked that my Master Page background images are "sent back". I tried to wear my text boxes at the front on the Pages of my body, but they are still hidden. Interesting as the anchored frame (the icon), I attached to each NOTE or TIP point appears, but the text is not. Also, I can see and select the contours of the block... the text is hidden. If I drag the fame to another part of the document (for example, on top of another Master Page text frame sank, while the text is displayed.

  There is no image on the master page to the enclosed area. I wonder if that's what I need trouble. Just add a backstory (not attached flow)?

  Advice before I go and screw something else?

  It is what it is supposed to look like (1). Image (2) what I mean now.

  

  

  Thanks Arnis,

  It was the property of skin! How simple... I didn't have on this subject.

  Solved!

  To answer you question, however... my approach for the construction of this new model was:

  1. I created a graph from bottom (full page) to contain the image of brand and imported/positioned.
  2. I placed the header and a footer frame and filled with content.
  3. I placed the blocks of text with streams (as a single stream in this document).

  I'm not dropping blocks of text for the content of the body... except for these tips and remarks. I don't want to use a workflow for this because I never know where they'll pop up and I want to be able to (position) specifically on each page. Is this a good approach?

  Yes, I'm aware of the continuous line down the block of text NOTE you mentioned. Originally, I had all the text within the limits. When I have updated master, all offbeat pages (only in blocks of text body page with notes/tips). I repositioned and they flow very well now.

  Thank you very much for your help continues with it. Why these problems always pop nitpciky - up to date - not when things are slow!

• Thunderbird 38.0.1 requires the master password to be entered twice after activation of Gmail OAuth

  I have a Gmail (IMAP) and an iCloud (IMAP) TB account protected by a master password. Since the upgrade to to 38.0.1 and the configuration of the acct of Gmail for OAuth I find that when I run the application of TB he invites me for the password twice before that I can move forward. I tried to remove the iCloud acct and then he needed only the password entered once, but as soon as I have readded the iCloud acct invites more twice once for the password. It seems that you must now enter once for each account e-mail instead of after the period. It seems to be triggered by changing the Gmail to OAuth as previously he worked as documented (a single master password entry) with two e-mail accounts.

  In fact, when launching first TB appears very briefly the form of drop down menu of master password and then immediately disappears (before), because then he slide down again to allow the first entry in the master password.

  Good news - updated my Mac to 38.1 TB newly released solved the problem of the Thunderbird menu corrupted when you use StartupMaster 1.6.1.

  Now I can use StartupMaster successfully to bypass the password multiple guest problem (bug #177175) at the launch of Thunderbird.

• How do update you the "cloud-copy" of bookmarks in sync-ed, etc. (assuming that 'sync' only allows you to synchronize your device with the cloud

  The machine used for the first set up a sync account seems to provide the cloud 'Captain' at the time of installation. Subsequent operations 'sync now' any device seem to download this cloud 'master' on the devices. But how to update the 'master' cloud and it can be done (transferred to) by the device of your choice?

  Hi Igbortaz,
  This ONLY happens when you join the account the first device. After that, all devices connected to the account synchronization and merge with the stored then replaces the local profile. Unfortunately, at the moment it doesn't have a function to choose the device that is the master.

  And before any changes, I recommend you make a backup of your profile.

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Qosmio G30-102 - update of the HD-DVD player

  Hello

  Despite having owned my system for nearly two years, I still had to use the HD of the STRANGE (TS-L802A) feature to watch HD DVD movies. I recently bought some old titles and started watching the first last week when after 10 minutes, the movie stopped and an error dialog box appears explaining that the media can not be read. After you haven't tried varioud reboots, re-install the reader software HDDVD Toshiba and a re-flash of the firmware still no joy to play HDDVDs. CDs and DVDs are still going strong.

  Since I was out of warranty, I put on the search for a replacement unit and found a system of opportunity-pull SD-L802B on ebay for a reasonable amount of money, but with the bezel of a Toshiba Satellite, I can quite easily change. I checked, double checked and triple checked that the SD-L802B reads HDDVDs, and according to the writing on the Toshiba site, it is simply a newer version of the TS-L802A with 8 MB of cache instead of the 1 MB mounted on the TS-L802A.

  So I bought the camera and having installed (and resorting to the peripheral solder pin 45 and 47 to make master) I'm finally greeted by a message popup explaining that the system has found a player SD-L622A. My heart is Serra.

  It is clearly a CD/DVDR drive despiet the fact it has SD-L802B emblazoned on it. V622 (which should maybe have the game away!) and the Bios is 70.

  It's a long shot, but I hope that the reader I can be flashed to make a complete SD-L802B on the remote hope that in all other respects the disc material is a 802, i.e. has HD ability but disabled for the 622. But my instinct tells me that it is in all respects a laser HD 802, but without the necessary decder, mounted on the PCB.

  I'm a little angry that the original drive has failed in the beginning of the first place, likely a laser non-compliant HD cpl standards, but now more then a disc labeled as L802B turns out to be a L622A...

  Any help appeciated, even if it is to confirm that the drive cannot be flashed to a 802 save me more time.
  I might try the Flash but I fear that he would be completely useless.

  Thank you

  Leo

  Hello

  To be honest, I can't believe that the HD-DVD SD - L802B drive has been flashed to be a SD-L622A.

  I searched a bit on the internet and found this Toshiba page;
  http://Toshiba-SDD.EMS-p.de/index.php?id=112&PID=221&SID=3
  It s clearly mentioned that this drive reads HD DVD (including DVD - RAM) DVD and CD media.

  But unfortunately, there is no update of the firmware or anything else that might set the drive to the SD-L802B.

  Maybe this isn't really a SD-L802B but it was sold as the SD-L802B

• Block of detail automatically updated when the form is saved

  Hello

  I have a form with 2 blocks of tabular data (1 master and 1 retail).

  The retail block also contains a non-base of data element, a checkbox control. User can check or uncheck this box for each record in the detail block.

  My problem is, when the user changes something in the main block and saves (by pressing F10 or by clicking on save button), box block of retail values are lost.

  For a test, I created a trigger validation key at the level of the main block: I iterates over the detail records to collect values of checkboxes before doing a commit_form (the goal was to restore checkbox values right after), but even at this stage the check boxes are all null as if the retail block has already been re-populated and of course non-base of data items reset before the trigger validation key is enabled.

  What Miss me. It is a detail of a relationship block master / detail is updated when the form is saved standard? What are the alternatives to keep/restore my values of checkboxes in this situation?

  Thanks in advance for your help

  L0rd says:

  Hello

  I have a form with 2 blocks of tabular data (1 master and 1 retail).

  The retail block also contains a non-base of data element, a checkbox control. User can check or uncheck this box for each record in the detail block.

  My problem is, when the user changes something in the main block and saves (by pressing F10 or by clicking on save button), box block of retail values are lost.

  For a test, I created a trigger validation key at the level of the main block: I iterates over the detail records to collect values of checkboxes before doing a commit_form (the goal was to restore checkbox values right after), but even at this stage the check boxes are all null as if the retail block has already been re-populated and of course non-base of data items reset before the trigger validation key is enabled.

  What Miss me. It is a detail of a relationship block master / detail is updated when the form is saved standard? What are the alternatives to keep/restore my values of checkboxes in this situation?

  Thanks in advance for your help

  Check any Execute_query code in your form, which produce this issue.

• The master/detail Page scroll, Incorrect rendering position

  I think that it is something simple that I am on and I hope that someone will be able to indicate what it is.

  I have a Setup master/detail, how they were created in the packed app go live Checklist for projects (see page 200) mirroring.

  • This means that my page template is a type of master/detail with a classic/region report selector in the master detail region. The classic report is set to not show in the region selector.

  Under it, I have several regions, each game to be included in the region selector.

  UPDATE: My first region on the page has several components display only in it. If I do not show this region then the problem of scrolling stops.

  My problem is when I insert in the page that the page is automatically past the master section, scroll up to the region selector. However I can scroll to top knowledge my master.

  Anyone have an idea what might cause this behavior?

  Hamster wheel engineer wrote:

  I think that it is something simple that I am on and I hope that someone will be able to indicate what it is.

  I have a Setup master/detail, how they were created in the packed app go live Checklist for projects (see page 200) mirroring.

  • This means that my page template is a type of master/detail with a classic/region report selector in the master detail region. The classic report is set to not show in the region selector.

  Under it, I have several regions, each game to be included in the region selector.

  UPDATE: My first region on the page has several components display only in it. If I do not show this region then the problem of scrolling stops.

  My problem is when I insert in the page that the page is automatically past the master section, scroll up to the region selector. However I can scroll to top knowledge my master.

  Anyone have an idea what might cause this behavior?

  The Cursor Focus of page property is set to the first item on the page? If so, change it to don't focus cursor.

• Manually insert a fixed set of detail records in the master record is created

  Hello

  I have a requirement for the creation of several detail records manually when a new Master Record is created.  I'll use information from a few fields of primary record that is created when you create the detail records.  To do this, I put the INSERT statements in 'before Insert trigger"in the main Table (to insert records from the secondary table) . The problem arises when the trigger is trying to insert the record in the secondary table because of the Foreign Key constraint on detail record.  Since the master record is yet to be established, it will not INSERT on detail table and raises foreign key constraint violation.

  One way to overcome this is by simply creating the master record.  And in the master report, providing a button (link column) and execution of a PL/SQL procedure that creates the detail of records.

  I just wanted to know is there a way to do this when creating main drive itself?

  Here's what I defined under master table before creating the trigger-

  CREATE OR REPLACE TRIGGER bi_master_table
  BEFORE INSERT OR UPDATE ON "MASTER_TABLE" FOR EACH ROW  
  DECLARE
  v_master_pk_column NUMBER;
  BEGIN   
    IF INSERTING THEN 
      v_master_pk_column := master_pk_column_seq.NEXTVAL;
    :NEW.master_pk_column := v_master_pk_column;
  
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (v_master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
    END IF;
  END;
  
  

  Note: Detail table key primary value automatically filled using his own trigger and sequence.

  Thank you and best regards,

  -Anand

  Hi Anand,

  before the trigger for insertion to complete the primary key of the main table.

  CREATE OR REPLACE TRIGGER  bi_master_table
     before insert  on MASTER_TABLE
     for each row
     begin
      SELECT master_pk_column_seq.NEXTVAL INTO :NEW.master_pk_column FROM DUAL;
     end;
  /
  

  Trigger after Insert to insert the record in the detail table,

  similar to this

  CREATE OR REPLACE TRIGGER  "DETAIL_TABLE_INSERT"
  AFTER INSERT ON MASTER_TABLE
  FOR EACH ROW
  BEGIN
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (:NEW.master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
  END;
  /
  

  or you can implement the same writing Pl/Sql procedures without using triggers.

  Check this Doc contains example with or without the help of relaxation: https://markhoxey.wordpress.com/2013/08/20/returning-into/

  Hope this helps you,

  Kind regards

  Jitendra