Updated Windows for KB 2600217 and KB 2656351 keep repeating

Similar Questions

• Windows update fails for KB2661637; KB2647516 and KB2660465

  Windows update fails for KB2661637; KB2647516 and KB2660465 - I ran MicrosoftFixit.wu.Run and get the same results.   Help, please... thnx

  Hi SparkySA,

  Follow the steps in the article.

  Cannot install Windows updates

  You cannot install some programs or updates

• Update Windows Defender 80240016 error and McAfee Internet Security program not scan

  Original title: I get an update of Windows Defender 80240016 error. What can I do about it?

  I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?

  I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?

  McAfee must have disabled Windows Defender during the installation of McAfee.

  You must disable Windows Defender.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

• CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them.

  CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.

  What am I supposed to do?

  Thank you, Carlo Romano

  Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.

  Thanks a lot for the quick reply anyway.

  Carlo

• Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

  Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

  Download the update of fireworks from here:

  https://www.Adobe.com/support/Fireworks/downloads_updaters.html

  When you have downloaded and extracted the file, right click and then click on "Run as Administrator".

  This should work for you. I had the same problem and did and everything worked.

• Windows Update - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) - Code 80070057

  I use Windows Update to install updates for my Windows Vista laptop.

  The update that I am installing is Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930).
  I get the error code is Code 80070057.
  I just did a check disk Local and it still does not work.

  80070057 - ERROR_INVALID_PARAMETER. Third party service that is running in the computer creates the problem. Please do a clean boot, and then install the update.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  or

  Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
  http://support.Microsoft.com/kb/947821
  80070057 - ERROR_INVALID_PARAMETER 0 x - the parameter is incorrect.

• Finished downloading updates Windows for KB263383, KB2518864, KB2572073, but they repeatedly ask to install again and again.

  Windows XP

  I installed Windows updates through update automatically.  He finished and I rebooted the computer, but when it restarted, yellow shield was still on the Board.  I clicked on it, once again and installed the same updates.  I went to Windows update and installed from there he compoleted and said success but icon is always on trayy.  I don't see these updates in Add/Remove.  Besides I have SP # and I'm not sure why I get these updates.

  original title: installation of updates KB263383, KB2518864, KB2572073

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• ElitePad 1000 G2: 10 Pro Version 1511, threshold 2 update Windows crashes on 'features and drivers '.

  Summer running Windows 10 Pro 64-bit for months without problem on my G2 ElitePad 1000; application Windows 10 updates throughout - so far. Yesterday, 12/11/2015, 1511 (threshold 2) updated version of Microsoft automatically downloaded and rebooted to start installation of operating system upgrade. The upgrade completed the first phase "Copying files" and began the second phase "Patterns and drivers", then stopped (paused) to 40% total progress/23% features and drivers progress with no other response. Only one stop 'hard' (hold down the power button / stop for at least 10 seconds) worked. On 'power up' the result was a "restore previous version" immediately, and subsequent reboot restored my previous login - as expected.

  HP have a new image or update for Windows Pro 64 - bit version 1511/threshold 10 2? The update is put on hold due to a driver issue? Any advice would be appreciated.

  Finally, a solution for me! I used Microsoft's latest "MediaCreationTool" (as of 11/13/2015) to download and create a "USB stick" (08/01/2016) upgrade support. Stick created USB contained more than 3 GB of content upgrade. Started my ElitePad in my 10 original Windows operating system upgrade, and then insert the USB in my ElitePad. Launched "Setup.exe" on the USB key to start the process to level, and left the USB connected until the upgrade is completed; several reboots of the upgrade. Once launched from Setup.exe, a menu background blue proceeded and displays "Check updates" for more than 15 minutes (check the updated drivers, etc.), and then proceeded to the display of the upgrade process (progress circle GUI). The upgrade has completed in 90 minutes without a hitch. So far, all programs and functions are intact. I guess that is focused on the HP drivers updated (finally) in the current construction of 1511, and/or the last created USB stick media works where Microsoft Update (via Microsoft Update servers) has a problem. For me, this solves my problem to upgrade v1511. I hope this helps others.

• Update request for Office CD and gives error 8024002D

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows Update every time I try to update as requested it starts to install, then stops and and a message saying "the component you are trying to use is on a CD-ROM or another removable disk that is not available, insert the Office XP Professional with Frontpage @Microsoft @ the drive and click ok. I do not have this disc or never had, so when I press cancell it comes up with an error code 8024002D. Can antone tell me how to get around this problem?

  Error message saying updates are required and the

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  * Title *.
  Update

  Hi Katy,.

  It seems that you try to install Service Pack 3 for Office XP, and it asks for a disc, is this correct?  If so, here is a link to Microsoft on how to install the full version of SP3, so you do not have to provide the original disks: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=85af7bfd-6f69-4289-8bd1-eb966bcdfb5e.

  Scroll down to the section install SP3 without the original Office XP CD you will find a link to download version of the Office XP SP3 full of the file. Download this file first (it's important-about 58 M), then run it.  After the update installs successfully, you can safely delete the downloaded file.  This should solve your problem and it will not ask you to install the update more.

  See you soon,.

  Barbara

• Update Windows for windows 7 x 64, updates failed

  I have 27 updates to windows to do, and I get error update failed when you try to install. The reason why I have so many updates is that I had windows vista and I tried to update and it caused problems with my internet connection wireless, and I didn't have the time to deal with it, so I stopped updating. Then I upgraded to Windows 7.

  
  

  Errors:

  Code 800736B 3.

  I tried to install separately as well as in a group, but it downloads, come to the part of the installation and then I get the error. I tried to reboot update and deletion of temporary files, nothing. These are the updates, I'm trying to install:

  A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB978262)

  "" for IE 8 for windows 7 x 64... KB980182

  "" for media center ' "KB977863

  Update security for Windows 7 for x 64-based systems (KB971468)

  ««KB975560»»

  ««KB978542»»

  ««KB978601»»

  ««KB979309»»

  ««KB979683»»

  ««KB980232»»

  ««KB981332»»
  Updated for the display of IE8 for Windows compatibility list 7 x 64 based... KB982632
  Update for the client for windows 7 for rights management services... KB979099
  Update for Windows 7 for x 64-based... KB975496
  ""KB976264.
  ««KB976662»»
  ««KB977074»»
  ««KB978637»»
  ««KB980408»»
  ««KB981793»»
  Office Live add 1.5
  Update3d windows defender - KB915597 definition
  A security updates for Microsoft office Excel, System (x 3), OneNote
  -> KB978382, KB976321 KB978380, KB980729 KB981715
  any help you can give me would be great.

  It wasn't a wise thing to do. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section ofhttp://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: The free trial Norton which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run theNorton removal tool before installing updates and before installing your new anti-virus application.

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install updates windows (KB973593), (KB973704), KB976416) and (KB974561).

  I can't install Microsoft Office Excel 2007 (KB973593), Microsoft Office System 2007 (KB973704), Microsoft Office InfoPath 2007 (KB976416) and updates of Microsoft Office Word 2007 (KB974561). After installation and restarting Windows, my updates are still there. I installed them manually, but that doesn't seem to work.

  Hello

  Do you really need these updates? If they are installed you can right click on it in the control panel - Windows
  Updates and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Getting the 80070005 error when you try to update Windows for Vista 64 X

  Even if my computer is configured to automatically download Windows updates, it seems he never succeeded to date.  When I push an update, I get the error code 80070005.  I can't find a solution for this error.  Have no problem computer operating, except cannot get Easy Photo Print to Canon to work.  Whenever I try, I get this message: Thunking spooler APIs from 32 to 64 process has stopped working.  It will prompt you to get an update of Windows.

  Hi, Tom H7193,.

  You can read the following article and try the steps and check if you can install Windows updates:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  http://support.Microsoft.com/kb/968003/en-us

  Note: Applies to Windows Vista.

  You can also try to download the latest version of the printer drivers for Windows Vista 64 bit and check:

  http://www.USA.Canon.com/Cusa/professional/products/printers

  Hope this information is useful.

• updated Windows error code '00000643' and '00000646.

  Here are the error codes I get when I run my updates, I think that my computer is not working properly because of these updates is not installed please help :)

  Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. clickStart and type notepad in the box start the search .

  2. click onNotepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on thefile menu, click on record under.

  2. in the listrecord under , click all files.

  3. in thefile name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then clickrun as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or clickcontinue.

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/923100/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

  .

• Cannot download updates windows for windows 7

  Hello

  I'm having problems trying to download the updates of windows to windows 7. I have the 64 - bit version operating system. Whenever I click on "check for updates" it hangs there forever, and I finally to close the screen. I looked for solutions on these pages, but nothing seems to work.

  I ran the troubleshooting tool that says that he had fixed to something. I also run the tool File Checker system following the instructions on this link:

  https://support.Microsoft.com/en-us/KB/929833

  And the message I got in the end, is that the Windows Resource Protection did not find any breach of integrity.

  I'm not a COMPUTER expert so I'd be really grateful for any advice you can provide.

  Thank you

  Post proposed by the facilitator for the appropriate forum placed

  Windows 7 update problems? First read this.

  :)

• Why update windows continues to hang and do not install updates

  Original title: failed to update windows 7

  Why windows update continues to hang and do not install the updates. I paid a lot of money for this program and he went to *.

  Please try the following: set never 'Find updates' automatic updates and restart. Download and install KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  Best regards, VZ