Updates failed to install (80007065 B & 800 b 0100 error codes)

Similar Questions

• Updates on several occasions failed to install: KB973924, KB983590, KB2416471, with 80070BC9 error code 643 KB2434419

  Windows Update tells me that I need these four updates, and they fail and fail and fail. I've been unable to find anywhere error codes and worry about the consequences of their not updated. I tried a dozen different approaches, including a clean boot, without success. Thanks for any help you can give.

  Chauncey Bell

  What Windows are you using?

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update error code '0 x 643 ' or Windows error code install "1603".

  http://support.Microsoft.com/kb/923100/

  You receive error code 80070643 0 x or 0 x 643 , error code when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows family vista premium 64-bit fails to install net framework 3.5 sp1 error code 1603

  I tried several times to install this update for net framework and have had no success at all. I searched for an answer and also failed with that as well. I thought that I have that would give a shot. It's probably something very simple, but you know how it goes with computers. I'll paste the log of the try to install net framework 3.5 sp1 below:

  [03/18/09, 02:06:23] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:06:26] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 02:21:03] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:21:06] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 16:30:20] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 16:30:23] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 13: 32:50] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 13: 32:56] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 14:32:11] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 14: 32:14] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.

  That's what the Setup log gives me after that windows is unable to install net framework 3.5 sp1. I sure would appreciate it if someone could help me solve this problem. I just bought this pc about 2 months ago and it's the first question that I lived with her. Thank you

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Method 1: Manually remove and reinstall .NET Framework

  To remove and reinstall .NET Framework manually, follow these steps:

  1. remove the .NET Framework.

  a. Click Start and then click Control Panel.

  b. double-click Add or remove programs.

  c. Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.

  d. When you are prompted, restart the computer.

  2. use the Windows Installer CleanUp utility to clean up the State of MSI database for all versions of the .NET Framework.

  .      Download the Windows Installer CleanUp utility. The following file is available for download from the Microsoft Download Center: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  a. install the Windows Installer CleanUp utility as an administrator or a user account that is a member of the local Administrators group.

  b. Click Start, point to all programs and then click Windows Installer Cleanup.

  (c) in the Windows Installer CleanUp utility, remove all Windows Installer for the .NET Framework applications.

  3. restart the computer.

  4. download and reinstall all the versions of the .NET Framework that were previously installed on the computer.
  To download .NET Framework 3.5, visit the following Microsoft Web site:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en (5. When you are prompted, restart the computer.

  Note When you have reinstalled all the versions of the .NET Framework, you can use Windows Update to check for the updates of the .NET Framework.

  Method 2: Use the .NET Framework automatic cleanup tool

  This tool is not designed as a substitute for the standard uninstall procedure. You should try to perform an uninstall by following the steps in method 1, earlier in this article, before using this cleanup tool.

  The .NET Framework cleanup tool removes the .NET Framework for you. For more information about how to obtain and use this tool, visit the following MSDN Web site:

  http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx

  Note that this cleanup tool deletes shared files and the registry keys that are used by several versions of the .NET Framework. To ensure that all versions of the .NET Framework work correctly, if you run the cleanup tool to remove the .NET Framework, you must first remove all installed versions of the .NET Framework using this cleanup tool. Then, you must reinstall all previously installed versions, starting with the version number the lowest.

  Suppose you have the .NET Framework 1.1 and .NET Framework 2.0 installed on your computer, and you plan to use this cleanup tool. In this scenario, you use the cleanup tool to remove the .NET Framework 1.1 first and then use the cleanup tool to remove the .NET Framework 2.0. After you remove the two versions, you reinstall .NET Framework 1.1 and then install the .NET Framework 2.0, in that order.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I keep getting this 800 b 0100 error codes

  Here are the updates, the updates I've been struggling with and have tried to get this done for more than a week now and have not found why.

  Windows Vista Service Pack 2 (KB948465)

  Update for Windows Mail Junk e-mail filter [may 2010] (KB905866)

  Update security for Windows Vista (KB978542)

  You can try to download them separately and try to install manually to see if that helps. You can get them at: http://catalog.update.microsoft.com/v7/site/Home.aspx and entry of the KB number tp get the download page (or a link to it).

  You can get help from Microsoft Support FREE with SP2 at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.

  If this does not resolve the problem, please repost your questions in the Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "800 b 0100 error code"

  Hi guys,.

  someone at - it ideas because I can't install more updates, microsoft tried automated fixes, that did not also some manual corrections, they no longer work. He says something about the problem with the hosts and also something about the registry (although I cleaned my registry with norton, which fixed a problem, but it still does not work)? did system update readiness tool that also found no error. any help would be appreciated.

  Hi scottgm,

  1. What is the exact result of the SFC scan?

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the following link to run the Fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Hope this information is useful.

• Windows update fails to install KB2656368 and KB2686827. Get the code641 error

  Original title:

  Windows update fails to install KB2656368 and KB2686827

  I am running Vista Home Premium.  Windows update fails to install KB2656368 and KB2686827.  Download error code641 which seems to mean that Windows cannot identify the problem.  In the past, it was caused because the installer has been damaged.  In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem.  However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program.  The installation program be fixed right now.  Moreover, the tool "Fixit" said that everything is fine.

  Microsoft paid $99 for the support.  Tech uploaded a new installer.  Problem solved!

  Still wondering why the question about System Mechanic?

• KB2585542 Windows update fails to install.

  Why Windows Vista update KB2585542 fails to install.  I have tried many times & tried all recommennds of Microsoft patches.  I tried boot, safe mode, selective start & tried with the essentials of firewall & secuirity watched turned off but it still fails to install!    It always shows the error code 80070020

  Hello Cheryl Turk,.

  Method 1:

  I suggest to download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Disable all security, including Windows Firewall software, then check if it solves the problem.

  Enable or disable Windows Firewall in Windows 7

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Windows xp kb2718704 update fails to install with error code 0 x 8007005

  Windows XP KB2718704 update fails (approx. 5 + times) and gives the error code 8007005 0 x. Update is so important? Why is it a failure? Have used MSFixit, unresolved problem. I'm puzzled that MS is not problem. What is the SOLUTION to this problem.

  Arya-
  Thank you for your response. I didn't have the ability to use your suggestions. MS auto updates had popped up when I stopped, and finally, the update did the trick.
  Thank you

• Auto. updates fail to install. but Firefox tells me I have the latest version.

  Updates fail to install. When the order of Firefox, said I have the latest version and am unable to download the updated version.

  Hello
  The details of your system it seems that you are running the latest version of Firefox.

  Although you can visit here and make sure that it.

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• 2829361 update fails to install with error 0x80070005 - Win XP SP3

  KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3

  Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.

• I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions.

  I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions. Failed updates are as follows: "Security update for MS Core abuse 4 SP3 (kb2721691)" "Security Update for MS NetFrame Work 3.0 SP2 on Windows Sever 2003 & Win XP x 86 (kb2656407)" "as last but Frame Work 2.0 SP2 & (kb2604092) ' and finally 'as last but (2604110 kb)" How can I get these updates installed? "

  Hello

  Thank you for your response.

  Safe mode is different from boot were the clean boot will help disable you any of third-party applications or starting points which is the source of the problem.

  Also I suggest you to see link below and check if it helps.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798/

  Hope this information is useful.