Updates on the limit of 2 TB on MD3000 VirtualDisk size?

Similar Questions

• FM12-"Update of the book" causes problems of cross-reference font size.

  Version of FM: 12.0.4.445

  Windows 7 Pro.

  Here's what the references are supposed to look like:

  

  Here's what it looks like after that I run 'Update book':

  

  I can fix this by running "Update of references" for the individual file.

  Is this a problem of reference page? A bug? A wacky feature?

  Thank you!

  Louis

  What is the <$paranum>in your referencing format x - ref?

  In any case, I just tested this scenario with a document in a book and the same document as a standalone. You are right, there is a funky error when update is made from the book. The character tag is collected in the block of building <$paratext>and waterfalls on the rest of the content of the paragraph.

  Please report it as a bug via: https://bugbase.adobe.com/index.cfm

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• Update on the Satellite 2550 & Satellite 4030CDT

  Hello!

  I whant to uprgade both of this old laptop, and I need to know the maximum installable material.
  (1) how much RAM I can install on them? Says card 128 MB, but what if I update to bios?
  (2) and what the installable maximum capacity of HARD drive? In the other forum, I found 4030 with 10 GB of HARD drive, but I think that this is not the limit.
  (3) to 4030 CPU installed in the MMC1 location, what is high CPU of the page who might be working there? In my dead laptop battery pack and the two 10.8V. Then I bought every new battery Toshiba and replace them?
  It is not bootable USB 4) in two books. How can I solve this problem? If I buy PCMCIA SATA or USB controller will boot them?
  (5) I take a look at the inside in my laptop and I found two small rounded cells in 4030. What are doing?
  (6) such a USB port that installed on two laptops is 1.1 and I can't do anything to upgrade?

  Thanks in advance! ZAC

  * Satellite 2550 CDT *.

  -max RAM 192 MB
  -compatible memory modules:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB
  -power options:
  Universal adapter PA2450UE
  PA2487U Lithium - ion battery pack
  PA2488UE battery charger

  Official statement is 4 GB HDD for Satellite 2550CDT and satellite 2590CDT 6 GB HARD drive.
  It is not easy to find these info, but maybe you can use 10 GB of HARD drive. I don't know about you.
  The BIOS update has nothing to do with it and new version of the BIOS is not designed to increase the values of upgrade hardware, but to correct serious problems.

  According to the specification of the computer laptop Satellite 2550CDT has Celeron 366 CPU and Satellite 2590CDT Celeron 400. Both processors have the same bus clock I presume that you can upgrade the processor Celeron 400.
  ---------------------------------------------------------

  * Satellite 4030CDT *.

  -max RAM 192 MB
  -compatible memory modules:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  -Expansion
  PA2717UY map Station III
  PA2731UE Port Replicator
  PA2730U spacer (for card Station III)

  -Power options
  Universal adapter PA2450UE
  PA2487U Lithium - ion battery pack
  PA2488UE battery charger

  With disk HARD is the same. Official statement is 4 GB. You can try to install 10 GB. I have not found information on processors. He is almost 11 portable model and to pick up some info relevant is nothing but mission impossible. ;)

  Try to contact the nearest authorized in the hope that they can help, but, to be honest, I'm not sure they're going to waste their time with these oldies.
  --------------------------------------------------

  (4) there is nothing to fix, because it isn't a feature not work type. These oldies can't boot from the USB port. And how you want to enable the PCMCIA port work like port bootable? Forget it.
  (5) the RTC battery and spare battery
  (6) maybe using PCMCIA card with USB 2.0 ports

  Good luck!

• supported DV6 maps wifi - update of the BIOS whitelist?

  Okay, I'm sure I'm not the only person here who was COMPLETELY dismayed to discover that HP has used a restriction of peripheral BIOS level control in recent laptop, which is a 'white list' models, to support that a limited set of installed models of devices.  Yes, HP has felt the need not only to prevent owners from installing ANY WiFi card of their choice, but to leave the list CLOSELY LIMIT.

  I can understand that HP forged relationships with only some WiFi card suppliers like Atheros, Realtek, Ralink, Intel and Broadcom and that for an AMD chipset, there would be prevention of the use of the WiFi Intel cards because... God forbid that the AMD hardware and Intel work together.

  But what really gets me crazy it's marks 'allowed' to work on a given computer, the restriction is focused to allow some WiFi cards.  But what about PROGRESS?  Several years later, there are WiFi new cards on the market that offer greater speed.  Even computer owners HP laptop cannot use them because of this application from the "white list"!

  WHEN... when is HP going to issue updates the BIOS to at least receive some of the more recent models WiFi card so that users are not left "stuck in 2nd gear?  For my dv6-6145dx, the last BIOS update was late 2011 (F21).  NOTHING SINCE.  I would like to know what HP will provide an update of the BIOS to allow for more cards WiFi in my laptop.

  In fact, I would like to introduce THIS plea for HP:

  [quote] Expensive laptop computer Hewlett-Packard management team,

  I understand your need to promote the business relationships with certain suppliers of material and decided to establish a protocol of 'white list', which prevents a laptop operating during an attempt be used with an "unsupported device"... not because it cannot physically be used, but because there is a BUSINESS DECISION to prevent use.  This isn't a big problem for new laptops, because a card WiFi is most probably one of the most recent technologies and will be sufficient for the owner.

  HOWEVER, over time the technology is changing.  I humbly request you need to put a time limit integrated on the use of the white list, or provide a BIOS update about 2 years after that a laptop model was released so that the owner can take advantage of technology device IMPROVED in their computers HP laptop brand.

  If HP does not feel it is prudent and esteem that limit the use of the device could entice a customer to buy a NEW laptop to take advantage of the latest technology, then think again.  If I don't see HP no make no effort to resolve this problem, you can bet that my next laptop will be from a vendor who is not called "Hewlett-Packard".

  Thank you for your time and your help in this matter. [/ quote]

  "If you keep an open mind, life will give you more opportunities."

  Hello:

  You are right that there are probably many, many, people who share your opinion and your post is the first I've read who is shown in an attitude of respectful and rational, breakdown your frustration.

  I generally ignore the ranting and raving messages on it, because nothing I write will count for them.

  Perhaps what I write won't matter to you either, but I'm willing to take a chance.

  There could be other problems such as regulatory (for example...) SAR - specific absorption rate) that HP has test and validate cards wireless and antenna as a unit systems to meet this criterion, which pourrait (is not) to know why they limit the use of several wireless cards.

  http://www.metlabs.com/services/wireless-and-RF-testing/SAR-testing.aspx

  While the other laptop MTRS also must follow the same guidelines and do not have to be used in their notebooks wireless cards (I stuck all kinds of WLAN cards in Dells for example), maybe it's how HP addresses the issue.  And we, consumers may be unknowingly breaking the law by installing any old wireless card in our cell phones, if we have not tested SAR that we installed.

  However, since it is a forum of consumer to consumer, you're "preaching to the converted."

  You can copy and paste your message for the CEO of HP, if at least it is read by an employee of the company, on the link below.

  http://WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Best regards

  Paul

• Updates for the SSD of 32 GB LITEON m2 on a special edition of Dell XPS-8900.

  Has anyone successfully upgraded Cache SSD m2 on their system XPS-8900?

  I have a Dell XPS-8900 that I bought a few months ago, and you want to update the cache of hard drive SSD m2.  The system has 2 to 7200 RPM hard drive + Cache SSD of 32 GB m2, 16 GB of memory (which I'm upgrading to 32 GB) and the processor i7 - 6700 k.

  I tried to replace it with either the Samsung 850 EVO m2 250 GB SSD or the Samsung 950 PRO NVMe 256 GB SSD.  I read in another post on the forum that the limit for XPS-8900 in the m2 slot was 256 GB.  Anyone know if this is correct?

  If anyone has any ideas on how I can change my system to tighten a bit more performance out of my system, I'd greatly appreciate your ideas.  It seems a little slow at startup and loading applications than I expected.

  It is not necessary to install a larger disk for use as a cache - it won't do much (if any) for performance.  There is a valid argument by replacing the disk cache with an SSD of larger m2 and then by installing the operating system on this drive (that is, running in native mode of SSD).  That WILL stimulate the acceptable performance.

  I doubt that there is a limit on the capacity of the drive - but there is no doubt about the physical size of the map itself.  Note that this system is NOT wired with an interface of PCIe 4 ways - then install a player is not worth the extra cost, because it will be limited by the design of the motherboard.

• Firmware and updates of the Addon for D90D7

  Hello

  How long do you keep the firmware updates and add-on for output devices?

  Why modules are listed per unit instead of the OS?

  Why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  If I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  Can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  Thank you

  Anthony

  Anthony,

  Let me answer each question better than I can.

  Q: how long do you keep the firmware updates and add-on for output devices?

  A: this is related to the product life cycle. This information is found at the following ADDRESS: http://www.wyse.com/support/end-of-life-policy

  Q: why modules are listed per unit instead of the OS?

  A: because the firmware is "Dependent on device", the firmware and all the Add-ons are stored in the repository based on the model of the device.

  Q: why the modules listed for my device not necessarily the add-on most recent available? For example WDM 5.5 contains new versions of Add-ons based Wyse.

  R: the only reason that I just was an oversight of the validation group.

  Q: if I want Citrix receiver for my device 4.3 How long can I expect to wait to have available for my device? Or are we supposed to simply create are own packages after you cease to make updates.

  A: there is no specific time limit that we must release the Add-ons. If you need the example of 9 Citrix Receiver) right now, you can install the Citrix receiver on the thin client or you can create your own package by using WDM. See WDM Admin Guide for more details on this.

  Q: can we expect improvements to the updates and the web in general experience finding things (downloads, forums, help, across different documents, not sure where to look sometimes) will improve with you coming under the ownership of Dell?

  A: Yes. We are actively working on moving the site of downloads to be consistent with the processes of Dell.

  I hope that answers your questions.

• What are the causes the limit 2 Gig Ram in m1170n Media Center computer?

  What are the causes the limit 2 Gig Ram in m1170n Media Center computer? It can be corrected? Makes for a much slower PC than it could be. I can update only 1 3/4 Gig and yet it can begin.  I tried the bios update that is available on this site, but it doesn't seem to change anything. It would be much nicer I could date within the limits of the operating system. 4 GB. Don't know what I'll use this 4 PC yet, but this could be the deciding factor.

  Here are the specifications of your HP Media Center m1170n desktop computer and its card mother PTGD1-(Puffer). Based on the specifications, this model has a maximum HP approved limit memory 4 GB (4 x 1 GB = 4 GB). The problem you are experiencing is perhaps due to incorrect memory modules, modules of memory defective or damaged, defective or damaged memorty slots or a very defective or damaged motherboard.

  Run the available at startup BIOS Diagnostics or download "memtest86" and create a bootable media. Then, run the test on each module individually, in the same housing. If all modules pass, rerun the test... this time by adding an additional module... Repeat until all slots are filled and all modules of memory are used.

  Please post back with your results.

  Please click the White Star of KUDOS to show your appreciation

• Does anyone know if Microsoft intends to increase the limit of 256 characters on the path/file names?

  It seems Im bumping up against the limit of 256 characters for path names / quite frequently these days. The increase of 8 + 3 characters for the file names, to the era of MS-DOS, to 256 characters/path of the file names is a wonderful thing when it was first implemented. But 256 limit character on the file + path names seems now quite inadequate. I'd even dare to suggest that increasing the limit above 256 would be more than just a nice update, but a required progress to catalogue the catalogue in full expansion of the knowledge we have today. Anyone know if Microsoft intends to increase this limit of 256 characters on the path + filename anytime in the near future?

  My recommendation is to increase the limit to a maximum of 256 characters to 4096 characters for the path + filename. This should be sufficiently comfortable for a few years anyway.

  System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  This already done with versions Unicode Windows API functions. When tools using the Ansi Version (to make it compatible with Win9x) the path is limited to 256 characters. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Need help on the essential "UPDATE" of the data in the table...

  Dear experts,
  
  Need Advice...
  
  I have one table in which i have 200,000 records, now in this table for each record i have to update quantity figures...
  
  To perform such bulk update i am using the following method...
  
  *1. At first i create TYPE*
  
       CREATE OR REPLACE TYPE T_OBJ_GET_QTY (--);
  
  *2. Create TYPE as table of object created in step 1*
   
       CREATE OR REPLACE TYPE T_GET_TEST_QTY 
       AS TABLE OF T_OBJ_GET_QTY; 
  
  *3. assign object type to the variable*
  
       p_get_test_qty T_GET_TEST_QTY; (Created in step 2).
  
  *4. now i write the cursor using type created in step 1...*
  
        cursor c_upd_qty as
         select T_OBJ_GET_QTY( col1, col2)
         from v_view;
  
  *5. open cursor and fetch into variable created in step 3...*
        
         open c_upd_qty;
         loop
             fetch bulk collect into  p_get_test_qty limit 1000;
             --perfom update now..
               forall rec_upd_qty in 1..p_get_test_qty.count
                   update table t1 
                   set c1 = treat(p_get_test_qty(rec_upd_qty) as T_OBJ_GET_QTY).c1
  
                  exit when notfound;
      end loop;
      close c1;
  
  
  Kindly let me if this correct way to perform bulk update of the data, or is there any better way to do so...
  Please share your inputs...
  
  I hope i am clear in asking my question
  
  Regards
  nic

  Published by: W Nicloei on May 27, 2011 01:10
  
  Published by: W Nicloei on May 27, 2011 01:36
  
  Published by: W Nicloei on May 27, 2011 01:45

  Ahh, ok.

  And a row of the view corresponds to a line in the table that you want to update?
  I guess that your update statement would have a WHERE clause identifies the row to be updated, right?

  If so, why not "merge" the view in the table, using the MERGE Oracle statement?

  Something like:

  MERGE
       INTO  target_table tgt
       USING source_view vw
       ON  ( vw.key-column(s) = tgt.key-column(s) )
    WHEN MATCHED
    THEN
       UPDATE
       SET   tgt.c1 = vw.c1
  /
  

  I still don't see why you would need a pl/sql program that retrieves all rows from the database in memory program and then writes all back in the database.

• Update of the collection based on (wwv_flow.g_f01) report

  Hi all
  I have a page in my application that contains 3 standard reports based in a collection. There is a main report and from there you explore the other report, and from there you can go down to another (3rd report) that I'm trying to update a member of the collection based on an lov. I don't know how to insert the value from the lov in the 3rd report.
  
  
  Select seq_id
  IN CURR_SEQ_ID
  of apex_collections
  where collection_name = "ARGYLL_INVOICES."
  and c001 | C002 =: P12_EPSB_JE_HEAD_LINE_NUM;
  
  apex_collection.update_member_attribute (p_collection_name = > 'ARGYLL_INVOICES',)
  p_seq = > CURR_SEQ_ID p_attr_number = > 17, p_attr_value = > "EDMO");
  
  It works fine, but of course, it is hard coded. I would use the api wwv_flow.g_f01 but I can't make it work with my rudimentary understanding of this api call.
  
  apex_collection.update_member_attribute (p_collection_name = > 'ARGYLL_INVOICES',)
  p_seq = > CURR_SEQ_ID p_attr_number = > 17, p_attr_value = > wwv_flow.g_f01 (a few references here);
  
  
  Any guidance would be most appreciated.
  
  Thank you

  Here is an excerpt from a quick tutorial on the use of collections. I'm including the section of the report you can see the corresponding values:

  SELECT rownum, apex_item.hidden(1, c001),  --Key ID
       apex_item.text(2, c002, 8, 8) VALUE1,
       apex_item.text(3, c003, 3, 3) VALUE2,
       apex_item.text(4, c004, 8, 8) VALUE3,
       apex_item.date_popup(5, null,c005,'MMDDYYYY',10,10) MY_DATE
  FROM APEX_COLLECTIONS
  WHERE COLLECTION_NAME = 'MY_COLLECTION'
  

  It will be a report as a SQL report - you are just pulling the data from the collection. You can always ask the nice formatting, naming, sorting, etc. of a standard report. In the report, the user will have 3 values 'text' and a Date with the date picker. You can change the format, make sure just to change all four procedures.

  What is critical to note here are the numbers that come just before the column names. These numbers become identifier in the table used to capture data. What is APEX is creates an array of up to 50 items designated as F01 - F50. The F is static, but the number that follows, it matches the number on your tax report above, IE, F01 will contain the primary key value, F02 will contain the first numeric value, etc.. Although not strictly necessary, it is advisable to assign these values so you don't have to guess.

  A note more: I try to align c00x values in the column with the values of F0X collection in the table to stand straight, but they are values that do NOT have to match. If you have a request that you think could get developed, you can leave gaps where you want. Remember, however, that you have only 50 columns of table to use for the data entry. It is the limit of F0X table even if a collection can have up to 1000 values.

  Now, you need a way to capture the user input. I like to create this as a PRELIMINARY procedure CALCULATIONS/VALIDATIONS in this way the user can see what they changed (even if it is false). Use Validations to intercept errors.

  declare
    j pls_integer := 0;
  begin
  for j1 in (
    select seq_id from apex_collections
    where collection_name = 'MY_COLLECTION'
    order by seq_id) loop
    j := j+1;
    --VAL1 (number)
    apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
        p_seq=> j1.seq_id,p_attr_number =>2,p_attr_value=>wwv_flow.g_f02(j));
    --VAL2 (number)
    apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
        p_seq=> j1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f03(j));
    --VAL3 (text)
    apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
        p_seq=> j1.seq_id,p_attr_number =>4,p_attr_value=>wwv_flow.g_f04(j));
    --VAL4 (Date)
    apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
        p_seq=> j1.seq_id,p_attr_number =>5,p_attr_value=>wwv_flow.g_f05(j));
  end loop;
  end;
  

  Clear as mud? Walk slowly through it. The syntax tells APEX Collection (p_collection_name) (p_seq) line, then what attribute/column (p_attr_number) updated with the value (wwv_flow.g_f0X (j)). The number of the attribute is the column number of the collection without the 'c' on the front (IE c004 in the collection = attribute 4).

  See if this helps answer the question. You'll notice that I'm grabbing values SEQ_ID of the collection and a loop through them one at a time and using them to find the index of the JavaScript array holding the corresponding value, I need to use in the update part.

• Problems with the LIMIT in BULK FETCH clause

  Oracle 9i
  =======
  
  I am using this piece of code for insert/update records in a table (replaced by a SELECT INTO in the following example to test). I want to do in pieces since I can't do it at once (this causes an error snapshot too old).
  
  DECLARE
  Typn TYPE IS TABLE OF NUMBER INDEX OF directory;
  TYPE typv IS TABLE OF VARCHAR (1000) INDEX directory.
  
  collpn typv;
  collsi typn;
  collpi typn;
  collaa typn;
  collaay typn;
  
  CURSOR C IS
  SELECT dates period_id d;
  St timestamp;
  number of TMPN;
  TCOL VARCHAR2 (1000);
  BEGIN
  St: = sysdate;
  TCOL: = 'a ';
  TMPN: = 0;
  OPEN C;
  LOOP
  FETCH C BULK COLLECT INTO collaay LIMIT 10; -remove the LIMIT clause to avoid the error
  WHEN THE EXIT %C NOTFOUND;
  BEGIN
  dbms_output.put_line (collaay. (COUNT);
  FORALL i IN collaay. FIRST... collaay. FINALLY SAVE THE EXCEPTIONS
  SELECT collaay (i) from tcol
  CR
  WHERE processed_period_id = collaay (i);
  EXCEPTION
  WHILE OTHERS THEN
  BECAUSE me IN 1..SQL%BULK_EXCEPTIONS. COUNTING LOOP
  dbms_output.put_line (tmpn |': ' |) TCOL ||': ' ||': ' || SQL % BULK_EXCEPTIONS (i). ERROR_INDEX |': ' | SQL % BULK_EXCEPTIONS (i). ERROR_CODE);
  END LOOP;
  END;
  END LOOP;
  dbms_output.put_line (sysdate - st);
  END;
  
  
  Any help would be welcome!

  What line gives error ORA-01403 no data found ?

  Exception WHEN OTHERS might be a problem

  EXCEPTION
      WHEN OTHERS THEN
          FOR i IN 1..SQL%BULK_EXCEPTIONS.COUNT LOOP
  

  You start looking at exceptions in bulk without knowing what the error was raised. It would be best to check explicitly for ORA-24381 as in This example in the documentation.

  Also to move the OUTPUT WHEN the end of the loop.

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Update of the bad experience of typing after Sierra

  After the update of the Sierra the typing experience is sub par.  He lags on the screen and sometimes the AutoCorrect intervenes before you finish typing, "correcting" the word after that I typed it correctly.  It sorts of predicted what I'm typing and corrects until I finished typing so that the end result is something like "unbelievablele" or "correcteded."

  Anyone with the same problem?

  You can disable the automatic correction of spelling and grammar until you are done typing and then allow him to do these things on your work completed. What you have described is Pages doing all this while you type. On the Edit menu.

  Uncheck all the features in the submenu, as I've shown here:

  

  When you are finished typing, then display spelling and grammar.