Updates that do not work... (66A error code): KB2518870 and KB2478663

Similar Questions

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Hello!

  the mechanic system?
  It's what has helped us to

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  Restart the PC and try to install the updates again

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  * We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.

  Hope this helps

  Microsoft KB article

  http://support.Microsoft.com/kb/2642495

  Thank you!

  Makoi

• How deactiveat elements 9 when he stopped not working, no error code.

  My 9 items stopped not working, no error code.  I am trying to disable and uninstall, however, it seems to turn off I have to be able to get the program to open.

  Thank you Jeff Wright, the third time that I chatted they disabled the program for me and I was able to uninstall and reinstall the program works now.  I had two applications on my lap top and the other on my computer when they disabled it.

  W

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Error 42 and 48 https://forums.adobe.com/thread/1893316

  Error 49 https://forums.adobe.com/thread/1491394 and https://forums.adobe.com/thread/1353632

• CD/DVD drive does not work. Error code: 39

  Original title: CD/DVD, HELP! Help! Help!  PLEASE, I BEG YOU!

  My CD/DVD drive is not reading any CD that is placed in it.  It allows you to work just fine now nothing at all, it's not same playiing or read the installation CD "s provided with the system and they are all scans CD that came with the computer when I bought it."  I am even unable to reinstall the drivers or anything else that I've seen a code # 39, I have no idea what it means.  I have never added any hardware, I installed my old program of words on this computer which is my original windows xp, but when I installed it it never gave me any problems.

  I NEED HELP, HELP AND HELPS TO SOLVE THIS PROBLEM, IT'S THE SECOND TIME I CAME TO YOUR SITE, AND I HAVE NOT RECEIVED ANY ASSISTANCE, I'M TRYING A SECOND TIME!  Help! Help! Help! PLEASE!

  Hello

  What happens when you try to reinstall the drivers? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Perform the System Restore to the date where the CD/DVD drive was working fine.

• Satellite Pro A210 DVD Drive not working no-error code 39

  Hi all

  My Satellite Pro A210 dvd player does not load.
  When I looked inside, he showed an error code 39.
  I tried uninstalling and reinstalling but it still doesn't work.

  Any ideas?

  Hello

  To my knowledge, the 39 error message appears if the CD/DVD drive is not visible in my computer.
  You can try this workaround:
  Go to Device Manager and remove the drive CD/DVD from the list of devices.
  Then go to the registry (regedit) and remove upper and lower key filters:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the device and test again
  I think this should help!

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• Windows updates failed to install with error code '80092004' and ' 80246007".

  original title: How do I know if Internet Explorer 9 is installed correctly or not?

  According to the history of my update, IE put 9 updated (?) correctly installed in July 2011.

  However, I have several entries after this date for updates failed. There are 2 error codes: 80092004 and 80246007.

  The version I have on my laptop is still IE 8.

  I don't use IE very often but would get updated and stop doing the update failed messages.

  I should try a manual download and install or is there a better alternative?

  Thank you.

  Hello

  Failed updates are all related to IE 9.

  I followed the two links you posted above. I have run windows update fixit, who said it was successful. I then tried to install IE9 on my update list, and there no, same error code: 80092004.

  I tried a manual install. That failed too.

  As usual with a microsoft update failure I now long in circles. When I click on a screen to learn more about the failure, or click to learn more about the error code, I headed for the same items, the same solutions, that do not work.

  Since I use IE as seldom as I can, I'll stay with IE 8 and hide the update to IE 9. This seems the best solution to get out of my hair.

  Thank you for your interest.

• KB2597098 does not install with error code 0 x 80070643

  I have three updates that will not be installed.  KB2597098, KB2596520 and KB2596954.  All three give me the error code 0 x 80070643.  I've lived all items and help I can find.  I have run "FixIt", verified service dares, update the update of windows, repaired the files Net.4, rebooted several times.  Nothing helps.  Can anyone help, or am I convict?

  I am running XP Pro 32-bit with service pack 3.

  I give up.  Will reformat the hard drive and reinstall the system.

• Update Vista error 80070507 and peripheral system that does not work

  Title: updates Windows Vista installs not because of error 80070507 and there is a system feature that does not work, but I don't know that that or how to fix it.

  Windows Vista updates do not install due to error 80070507.  He also seems to be a problem with a device in the system does not and I do not know that who or how to fix it.  Had to do a system restore not so long ago and I've had problems since.  Help, please.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• Impossible to get a sound, message no Audio output device is installed, download message that some adapters do not work with error 31.

  Original title: get a message "No Audio output device is installed".

  Worked very much later than last night - pop up on the taskbar during the night - had earlier this week, but a reboot can fix this - now stuck - Machine is HP Pavilion dv2736us - I tried to reload the sound driver from the HP site - says NO Available MEDIA - device also device manager says 6TO4 and a bunch of other "adapters" works do not (Code 31) - is this a MS or HP problem? -Help appreciated - Tks - has

  Hello

  1 did you do changes on the computer before the show?

  2. What are the other devices for which you receive the error code 31?

  Addressing the issue with the sound:

  Method 1:

  See the site:

  Error in Vista: No Audio output device is installed

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01695430&cc=us&LC=en

  Deal with the issue with message on 6T 04:

  Method 2: Update the wireless drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3: Install the latest drivers wireless

  You can get the latest driver wireless on the site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3650837

  If the problem persists, I suggest you obtain help on the site of HP support forum: http://h30434.www3.hp.com/t5/Notebook-Computers/ct-p/Notebook