Updates to Windows for VISTA

Similar Questions

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• On the removal of the updates of Windows for Vista

  I have Windows Vista 7.  If I switch to Windows 10 I continue to get automatic updates from Microsoft?  I understand that Microsoft supports is no longer upgrading the Vista operating system...

  Here are the dates of extended support for all current versions of Windows.

  Windows end of life
  http://Windows.Microsoft.com/en-us/Windows/lifecycle

• Error 800719E4 when you install the update of security for Vista(KB972270/KB978207/KB951847)

  Hello

  I need help for error of update of address 3 for Vista security:

  (1) 800719E4 error during the installation of update of security for Vista (KB972270)
  (2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
  (3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Thank you

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How long Microsoft will send updates of security for Vista? Office 2007?

  How long Microsoft will send updates of security for Vista? Office 2007?

  With all the hype about "the end of XP" I wonder how long Vista will continue to be updated with the Microsoft security updates? Already I replaces my two XP PC with Windows 8.1, but my wife still loves its Vista and wants to stick with it. She also and like Office 2007 and I wondered about this as well. Microsoft Security Essentials runs on it and has been without problems so far. How long she will be able to use this computer until it is not the choice like me with my XP PC? (I miss you)

  The lifecycle of Windows form: http://windows.microsoft.com/en-au/windows/lifecycle

  Office 2007 Suites Lifecycle Support: http://support.microsoft.com/lifecycle/?p1=8753

  Products Microsoft Lifecycle Support: http://support.microsoft.com/gp/lifeselect?wa=wsignin1.0

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• just installed a last set of updates to security for vista, but now my Internet connection disappeared.

  Hi, I recently installed a series of updates to security for vista sp2 final, but now I've lost my Internet connection...
  I can get into safe mode with network and get on this path ok but obviously not ideal.
  I can see the latest patches from the Control Panel, etc., but when I want to uninstall the latest series does not appear. Anyone know how I can uninstall these and again one by one to find the culprit.
  Pulling my hair so any help greatly appreciated.

  Borrowed from Try3

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I hope this helps.

• Why do I get the updates of Windows for versions of basic 86 & 64, when I run 32 based version?

  I have Windows Vista Home Premium SP2 and the type of system is the 32-bit operating system. I just installed IE 9 and things are fine. I do not understand why I am receiving updates of Windows for versions of base 86 & 64 marked important. (examples are KB 2541763 & 2545698, to name a few). I'm no computer expert and am totally confused as the updates, I need to install. I don't have not updated automatically to download/install, so I look at them and the support information before that I have to download/install the. Any help is greatly appreciated.

  NanaWO

  Hey Chick,

  x 86 is often used instead of 32-bit: this is the same thing.

  If you get 64-bit updates, then maybe they refer to the two but you should have gotten the one matching your system.  You may have missed the fact that they apply to both 32-bit and 64-bit - although each requires a different version of the update.

  The two examples of KB were available for x 86 and x 64 versions.  If your system checked and has presented, then it should be adapted to your system.  If still interested, you can always go to the Microsoft Download Center and choose the one that you specifically want and download and install manually.

  I hope this helps.

  Good luck!

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• Windows updates October 2016 for Vista

  How Vista will receive updates of Windows on patch Tuesday? I'll use single installer Stand on Krelay.de but it has not been updated for October.

  KB3191203 must be preinstalled.

  KB3191203 32-bit

  KB3191203 64-bit

  Best regards, VZ

• Update Windows for Vista - NVIDIA GeForce 8400 GS driver errors

  Update Vista Home Basic 6002:SP2.  Secunia Personal Software Inspector and MS Security Essentials confirm the system software is updated.

  Windows Update optional update for NVIDIA GeForce 8400 GS on 4/5 and 4/11.  Updates have been declared as 'Successful' but has caused problems of compatibility with the resolution.  (http://winqual.microsoft.com/support/?driverid=20418057) More details below.

  HW - Dell 530 with GeForce 8400 GS with BIOS 62.98.71.0.5 - 512 MB of memory dedicated - 767 MB shared memory.

  CRT is detected as driver MS running generic PnP 6.0.6001.18000.  The display is an AMW CM1722PF 17 "CRT with a preferred resolution of the 1024x768x70Hz.  (IIRC, MS drivers for Intel 8031 correctly detected VGA display modes, rather than generic report.)

  On both NVIDIA driver update attempts, Windows Update reports the success and I rebooted (despite the lack of obligation to restart).  Display was OK on the screen connection, but limited to 640 x 480 on desktop after login.  Edges of the Office had fallen.

  In addition, Panel-> NVIDIA Control Panel translates "the NVIDIA Display Panel Extension cannot be created... Possible reasons include the incorrect version.  Reinstall display drivers can fix this problem. »

  After the failure of 4/5, I uninstalled Windows Update display drivers and reinstalled on reboot.  Got the NVIDIA Display Panel and appropriate video modes.  Everything was going well until we repeated this Windows Update NVIDIA driver update fiasco 4/11.

  Have not repeated the manual Reinstall driver this time, I'm puzzled why Windows Update can't get this right.    This is a very common piece of hardware and you would think that there is regression tests for driver updates.

  This makes me wary of Windows Update.  Suggestions?

  Hello

  I posted an incorrect link, changed now.

  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  The TechNet post link also has the same information.

  Or here - manually on a single computer

  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Those who work in many cases, I've tried. If you have a current Windows
  Update that tries to update a driver, then right-click on it in Windows
  Updates and HIDE. There should be no other available.

  I hope this helps.

• Getting the 80070005 error when you try to update Windows for Vista 64 X

  Even if my computer is configured to automatically download Windows updates, it seems he never succeeded to date.  When I push an update, I get the error code 80070005.  I can't find a solution for this error.  Have no problem computer operating, except cannot get Easy Photo Print to Canon to work.  Whenever I try, I get this message: Thunking spooler APIs from 32 to 64 process has stopped working.  It will prompt you to get an update of Windows.

  Hi, Tom H7193,.

  You can read the following article and try the steps and check if you can install Windows updates:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  http://support.Microsoft.com/kb/968003/en-us

  Note: Applies to Windows Vista.

  You can also try to download the latest version of the printer drivers for Windows Vista 64 bit and check:

  http://www.USA.Canon.com/Cusa/professional/products/printers

  Hope this information is useful.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Packs of update of Windows XP, Vista, 7 for computers in offline mode.

  Hello I'm just wondering if there is an ISO of updates to date for each of the XP, Vista and 7.  I have several units who need updateing and try to do it all at once or one at a time is extremely tedious and counterproductive.  It would be great if I could find the ISO to download and simply put on a flash drive or a network drive to distribute updates to the current situation?

  Yep - security updates are available on image files CD ISO-9660 starting from Microsoft Download Center
  http://support.Microsoft.com/kb/913086 TaurArian [MVP] 2005-2010 - Update Services