On the removal of the updates of Windows for Vista
I have Windows Vista 7. If I switch to Windows 10 I continue to get automatic updates from Microsoft? I understand that Microsoft supports is no longer upgrading the Vista operating system...
Here are the dates of extended support for all current versions of Windows.
Windows end of life
http://Windows.Microsoft.com/en-us/Windows/lifecycle
Tags: Windows
Similar Questions
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Welcome to the community of Windows Vista answers.
First of all, we will try if we can start in safe mode.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Steps to start your computer in safe mode with networking
1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.2. Select "Safe Mode with network" and then press ENTER.
Access the link below for more information on how to start in "Safe Mode with Networking":
http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspxThe system restore.
http://support.Microsoft.com/kb/936212Method 1:
The restore of the system of Windows Recovery Environment (WinRE)(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair.
(f) in the system recovery options, click on system restore to restore the system.
Method 2:
Run the disk check Windows recovery environment to correct the bad sector on your hard drive
(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair
(f) in the system recovery options, select command line and enter the command chkdsk/r.
For the above two steps, you can see the link below.
http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspxOnce you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
Concerning
Amrihta. -
I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error. Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem. What should I do?
Hi Nita,
Thanks for posting your question in the Microsoft Community forums.
The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.
I suggest you try the procedure described in the article and see if it helps.
Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
http://support.Microsoft.com/kb/956706Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.
-
I have Windows Vista Home Premium SP2 and the type of system is the 32-bit operating system. I just installed IE 9 and things are fine. I do not understand why I am receiving updates of Windows for versions of base 86 & 64 marked important. (examples are KB 2541763 & 2545698, to name a few). I'm no computer expert and am totally confused as the updates, I need to install. I don't have not updated automatically to download/install, so I look at them and the support information before that I have to download/install the. Any help is greatly appreciated.
NanaWO
Hey Chick,
x 86 is often used instead of 32-bit: this is the same thing.
If you get 64-bit updates, then maybe they refer to the two but you should have gotten the one matching your system. You may have missed the fact that they apply to both 32-bit and 64-bit - although each requires a different version of the update.
The two examples of KB were available for x 86 and x 64 versions. If your system checked and has presented, then it should be adapted to your system. If still interested, you can always go to the Microsoft Download Center and choose the one that you specifically want and download and install manually.
I hope this helps.
Good luck!
-
Hello
I need help for error of update of address 3 for Vista security:
(1) 800719E4 error during the installation of update of security for Vista (KB972270)
(2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
(3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86Thank you
See the section "How to get help", for example, http://support.microsoft.com/kb/972270
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).
I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.
What should I do?
Hello
Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.
You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.
But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.
You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:
'Remove an update'
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again
"How to hide or show an update of Windows Vista"
http://www.Vistax64.com/tutorials/72491-Windows-Update.html
_____________________________________________
Here's how to change the update settings, if you think it is necessary to:
"Understanding Windows Update and Extras in Windows Vista and Windows 7.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/
Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system
See you soon.
-
Have tried to install the Windows for MS Office 2007 System KB2288931 security update that has failed several times since 12/2010 with errors found Code 646. Windows Update Troubleshooter could not identify the problem.
Tried using the troubleshooting as well as various solutions of help at home in Windows without success.
See the following topic for your question
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6336c34e-fd96-4ff8-bea7-a8f14a98d6fe>
-
I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.
This happened to someone else? Is it I can do it fix it?
Hello
Since you get such a serious mistake, I would use the free incident reports.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Could not get the updates of Windows for Windows 7
I'm running Windows 7, Home Premium edition, 64-bit and using IE 11. Windows Update stop working, so after trying all the fixes recommended, I reinstalled Windows 7 thinking that would solve the problem. Once more, Windows Update just works for 8 hours and still running. I also tried to update to Windows Defender and it was still running 8 hours later.
I looked in the registry editor and Windows Update keys aren't there.
Please help, or I can go crazy.
Install the rollup of convenience. The value of the automatic updates to "never check for updates" and then restart. Install (prerequisite) KB3020369:
https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817
Cumulative convenience:
It takes two more facilities manual for windows update to work:
In case the question returns next month, it is nothing to worry about. Microsoft keeps brings updates that the client cannot handle. We will keep you updated.
Best regards, VZ
-
Logitech TrackMan disables the update of security for Vista (KB973565)
When I install the update of security KB973565 it disables my Logitech TrackMan (trackball) wireless and may not be re-connected thereafter. I can only restore the TrackMan to uninstall this update of Windows Vista. Can I use a wireless mouse Logitech after installation of the update, but not wireless TrackMan. Is it possible to fix this?
Gordon[Is there a driver update available that you have not yet installed the TrackMan?]
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Have not received updates of windows (VISTA) since August 20. On the surface it just doesn't seem fair. I don't have the error codes on the display of Windows Update. I am out of updates or Microsoft has stopped support for update for VISTA?
Try the manual operation of microsoft update, try this link, look for the update from microsoft. In addition, more than a dozen
updates should come from update since August.
-
Cannot install the update of security for Vista (kb2479943).
I get the error code 80070643. tried to repair of .net framework windows suggestions. for the two sp1 3.5 and 4. I also uninstalled and reinstalled the .net Framework. I run microsoft 2007 office. any help on what I can do to get this security update to install would be appreciated. Thank you. Michelle
Hi Chelleabelle,
One of the solutions proposed should help to solve the problem and see the answer in the following thread:http://answers.microsoft.com/en-us/protect/forum/protect_updating/windows-update/5b222491-1674-483b-b296-211fc3c3170e. Frankly, I bypass the first step and start with the second stage if this is the only update, you are having issues with that.
I hope this helps.
Good luck!
-
Please guys, help me to find the key of the activator of windows for vista?
my laptop is hp 630
Check the bottom of the laptop to the COA / product key sticker. Can also be inside the battery case.
J W Stuart: http://www.pagestart.com
-
The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS
It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.
Hello
Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.
On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)
Occasionally (about 1 in 20 restarts) it would blue screen with an error:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)
But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.
I tried a lot of things to sort it, including:
(1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update
(2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log
(3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.
Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.
I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.
I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)
I guess the widowed causes 10 to do a restore, then the restore fails.
Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.
If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.
I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.
Thanks in advance,
Julian
Woo Hoo, I've solved the problem!
I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!
It took me 4 days of downtime...
I hope this helps someone else.
-
I am trying to add a printer, but the update of windows isn't the Epson Stylus Photo R200
I am trying to add a printer to use this weekend just to make the certificates. The printer is an Epson Stylus Photo R200, but in the update of windows for Epson, it is not listed. How can I get this added?
According to Epson:
Description: Printer drivers Windows 7 for this model are included in the Windows 7 operating system. Follow the instructions below to install the printer Windows 7 driver.
- Make sure that your computer is connected to the Internet.
- Click on , and then select devices and printers.
- Select Add a printer.
- Select Add a local printer or Add a network, wireless or Bluetooth printer.
- Choose your printer port.
- Click on Windows Update and wait for updating the list of printers. The update may take a few minutes.
- Select EPSON as the manufacturer, then scroll through the list of printers and select your printer. Follow the on-screen instructions to complete the driver installation.
Maybe you are looking for
-
Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI
Hi all I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them. I'v
-
A data in the very important document, which I just changed in deleted email
I can't believe bad luck indredible, a very long project that I worked on for weeks in an e-mail to aol using Firefox browser - I managed to complete my joy yesterday but incredibly to is did not last long - somehow all except 2 periods highlighted a
-
Inability to connect to Hotemail!
Hello. When I try to connect it to my hotmail, I get this: Oops! Internet Explorer could not find the du111w.dub111.mail.live.com! What does that mean? Please send me the solution for this problem at: * address email is removed from the privacy * bec
-
I have a xps 400 and I want to update my NVIDIA GeForce 7900 GS to the Radeon HD 7850 2 GB graphics card. The current supply is 375 watt and I need at least 500 watts to run. Is there a powersupply upgrades for my system? http://www.TomsHardware.com/
-
How do you get the product key from a pre installed Windows verion
I bought a computer comes with windows 8 pro 64-bit pre-installed already. Where can I find the product key for this. It is not revenue anywhere.