UPGPTHASH App Engine Post Installation takes a long time

Similar Questions

• J6450 software installation takes a long time.

  Hello

  I install the software for J6450 all-in-one on a Windows XP SP3 laptop.  I first tried to install from the CD supplied with the printer.  The progress bar shows 5% after 2 hours, 15% after 5 hours and 25% after more than 24 hours.  I gave up at that time.  The laptop is a high end machine, so the speed of the system is not a problem.

  Now, I downloaded the latest version of the software package and the driver from the HP website and try to install again.  After waiting for 4 hours, the progress bar is still 15%.   (The laptop has McAfee virus scanner.)  I don't think that it does not block the installation software.  At least that I saw all the messages saying that it doesn't block.)

  It's frustrating.  Can anyone help please?  This will never end?  Why does it take so long on a fast machine?  Is that what I can do to speed it up.

  Thank you.

  That did not help.

  However, the problem is now resolved.  What I did was to follow the installation instructions on http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00836418&lang=en&cc=us&taskId=135&prodSeriesId=3635376&prodTypeId=18972&docLang=en and that did the trick.   Note that my printer is on a wireless network, but still this procedure (uninstall of level 3, disk cleanup, turn off virusscanner, selective startup and install the software) worked.

  Thank you.

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• How to get rid of the msg "...". is very large and may take a long time to

  Hello
  Simple question:
  How to get rid of msg "...". is very large and might take a long time to load... »
  I tried to increase the number of cells under "App settings-> options-> warn if greater than 5 000 000 000 data form. I even tried to '0 '. Nothing works planning 9.3.1

  Hello

  That's how I've always changed the number of cells, after which display the message on the forms of data.

  There are 2 levels of adjustment. You can configure the application level, but users must select "Use Application Defaults" in the planning of the preferences of the user parameters. To do this, use the file-> Preferences and select schedule.

  Otherwise, you can set the value of the number of cells at the level of the user for ' warn if data form more xxxx ". It should solve the problem. This should be the installation program if you have not selected checkbox default Application for the user in the preferences of planning.

  If nothing else works, it is very difficult to guess, I would open a SR with Oracle.

  Let me know if it helps.

  See you soon
  RS

• Can any1 help me why my newly purchased Aspire e5-573 takes a long time to gt began

  Hi all

  I bought a new Acer laptop (Aspire E5 - 573) just 20 days ago, and it takes a long time to start (almost 8-10 minutes), although it works fine once it is started.

  Can someone please help me understand who is there any problem with my laptop, or it's just the way it works.

  I'm not a very irritable kind of guy and first use on laptop (per person).

  Help, please

  Best regards

  Ashish

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to names, email addresses, telephone numbers, serial numbers, etc..]

  Windows 8 and more, it is built in antivirus called Windows defender, it's enough.

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Programs to freeze or take a long time to respond

  When I run new programs that they can take a long time to start or they freeze. This happens sporadically, but enough to be a nusiance. I followed all the steps listed under the section "fixit" of Vista Hoem premium and the maintence of the Vista Help sections section: I've defragmented, wipe the drive, run the system performance (overall score of 5.4 due to memory all other 5.9), has increased to 8000 MB swap file and several other steps. If I try to click on the program, while the little circle turns, my screen becomes a pale white and I can't do anythingfor several minutes

  Has anyone else had this problem and solved? I have a lot of space (free 400 G) and 4G of RAM.

  This happens anytime, not only after the machine has been for some time, given the previous answers to this question.

  Daniel Dixon III

  Hi Daniel,.

  What application are you trying to access?

  You can perform the clean boot, and then check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Reference:optimize Windows Vista for better performance

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting up Oracle Application Testing Suite components Server 12.5.0.2.537 takes a long time.

  I am trying to install Oracle Application Testing Suite. It has installed successfully,

  but ' implementation of Oracle Application Testing Suite components Server 12.5.0.2.537 ' takes a long time.

  It is showing the message "set up pending".

  It's also show message 'spawning' C\OracleATS\bin\deploy.bat C\OracleATS\install\oats.ear".

  Progress of the installation is stuck at 99% of last four hours.

  Any idea on this?

  Thanks in advance.

  Dear Nilesh,

  Please try reinstalling with admin privileges.

  Click with the right button on setup.bat and run as Administrator.

  
  

  Please note uninstallation is not necessary.

  Thank you best regards &,.

  Susanto Paul

• Turn on FT takes a long time

  Hi, a few two farms VMware configured exactly the same thing in different datacentres. In a domain controller when switch on FT a message regarding the FT will use a memory full reservation... and after you click Yes after a short time FT starts to work.

  In the other DC, when turn on FT a message if poster regarding the FT will turn thin impression thickness discs, as well as the FT will use a memory full reservation... and after you click Yes, pi takes a long time to set up and failed. For example, currently onlt 40% complete and has been configuing for 2 hours. Also note that the disc is certainly not thin and drop thick so I do not know why this message is received.

  Does anyone know why FT can take so long to implement?

  Disk must be a special type of thickness: EagerZeroed thick

  Conversion (on the first time) take a long time.

  See: http://communities.vmware.com/docs/DOC-10854

• Update statement takes a long time...

  Hi, I'm below the update statement to update a table, which takes a long time (more than 4 hours).
  The credit of table has records 3crore and temp 22 k table records.
  Is there a better way to write this. A merger may be used?
  
  Update credit subpartition (pc_2011) pc set pc.principal = (select temp t.principal t where t.pc_id = pc.pc_id);
  
  Please help me.

  How abt merge...
  
  MERGE into credit SUBPARTITION (pc_2011) pc
                          using temp t
                          On(t.pc_id = pc.pc_id)
                          when matched then update set
                          pc.principal=t.principal
  
  plz post your oracle version...
  

• APEX_UTIL & APEX_INSTANCE_ADMIN take a long time to display the results in the browser

  Hi gurus of the APEX.
  When I create a new workspace with and add a new user with the API
  It takes a long time until I can see the results in the admin interface apex I NTHE browser.
  Why is this?
  Someone can explain or do you have a work around to make it faster?
  
  
  Here is the code I use:
  
  BEGIN
  APEX_INSTANCE_ADMIN. ADD_WORKSPACE(1196509005817318,'WORKSHOP','HR',)
  wwv_flow_api.set_security_group_id('1196509005817318');
  APEX_UTIL. CREATE_USER)
  p_user_name = > 'MY_ADMIN ',.
  p_first_name = > "FRANK."
  p_last_name = > 'SMITH ',.
  p_description = > "Description...". »,
  p_email_address = > '[email protected] ',.
  p_web_password = > 'oracle ',.
  p_developer_privs = > ' ADMIN: CREATE: DATA_LOADER:EDIT:HELP:MONITOR:SQL',.
  p_default_schema = > 'HR ',.
  p_allow_access_to_schemas = > 'OEHR. "
  p_change_password_on_first_use = > 'n',.
  p_attribute_01 = > ' 123 456 7890');
  END;
  /
  
  
  Thanks in advance.
  BR,
  Lutz

  Hi Lutz,

  I'm going to ask the obvious question, please do not be offended ;)

  You remember to "commit" the end of it if you run via SQLPlus etc.?

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• Pages take a long time to load in versions 6,7 and 8, version 5 works fine.

  Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!