Upgrade CSM4.3 question

Similar Questions

• Free Windows 7 Upgrade Clean install questions

  Hi, I have recently buy a Mini 5101 it comes with XP Pro and Vista Business... I currently have Vista Business installed on it. I wonder about the process of upgrading to windows 7. On the free upgrade Web site it is said that the operating system can be upgraded to windows 7, according to the weather, I have vista (upgrade straigh) or xp (must be a stable cleaning). Now, my question is can I perform a clean installation with this upgrade? I know that normally you can perform a clean install via the insertion of the disc of the previous operating system media during installation, but as the Min 5101 is a netbook (no cd drive) I will probably install it via a USB key. It is very important for me to have a clean install.

  On the upgrade Web site, it says that if you are using XP pro, you must perform a clean installation. It would be better for me to install XP now order the update, and then install Vista so that I can get the version that will allow me to perform a clean installation - or I'd get the same disc anyway?

  I know the installation disc doesn't have not yet been outside and not so should know the process entirely. Kind of hope that someone will have knowledge on this subject.

  The installation media will allow you to perform a clean installation 'upgrade' using product key of the current operating system during installation. This allows him to check that you are upgrading from a previous version of Windows.

• Satellite L650 - 19 p - upgrade graphics card question

  First to say hello to everyone ;)

  OK my question is:
  I have a Sat L650 - 19 p and I upgraded my ram to 8 GB.
  It is now possible to upgrade my graphics chip. I have the ati mobility radeon HD 5145 graphics card
  I hope that some out there may help

  much thanks.

  Hello

  Simply and short answer:
  Update graphics card chip is NOT possible for laptops.
  The GPU is especially part of the motherboard and not expandable.

  If you want you can read other discussions in this forum about this theme

  Welcome them

• Upgrade graphics card question

  Hello

  A question concerning an update of video card I have try. My system is a p7-1205 Pavilion, and I'm as Windows 7 Home Premium 64 bit. I'll upgrade my video editing software for Sony Vegas Pro 11, and I need to install a new video card to make it work. On a budget, will bare bones meet the requirements of Vegas and will receive this card; HP NVIDIA Quadro 600 WS093AT. Went not 3D, so I should be ok.

  However, on the page requirements, he said I should be Windows 7 Pro 64 bit. Think you I'm having trouble getting it running on my OS or do I have to upgrade it as well?

  Hello

  Review the information on thislink.  Are taken in charge of 32-bit and 64-bit drivers.

  Look at this graph Quadro.  You could probably go upwards to the Quadro 2000 without upgrading of food according to your budget.  Sony Vegas Pro 11 data sheet indicates a Quadro 600 or higher.

  Sony Vegas Pro 11 data sheet ishere.

  

• WinXPsysytem: The upgrade and have questions

  Have a dell e521 that I train and some questions.  Have already updated to 3 GB of memory on x 86 operating system.  Bios version active what 1.1.6 4/7/2007.  Have checked Dells site and they offer a version of bios 1.1.11 released on 04/09/2007.  Having checked their previous versions and mine is not yet in there.  Don't know if I should go with the 1.1.11 version or stick with what is on mine, any suggestions?  Also, I put in a 500 GB seagate HDD.  Have a 80 GB drive there now which is pretty maxed out.  Playing with the idea to put xp pro on the 80 GB and using the programs and storage 500 GB.  I would like to know if it's a good idea or not!  Could use pointers and how much others who have more experience I have of course on my best options for installation.  for performance and features.  Thank you in advance, Ron.

  It's sad to say, you should probably have spent your money on a new computer rather than on the RAM and a new hard drive.  Windows XP (you posted in a forum of Windows XP, that's what I assume you have) will be supported is no longer starting in April 2014. This means no more security updates and therefore increases the vulnerability to malware.

  That said, your system now-updated can probably support Windows 7. You must run the Windows 7 Upgrade Advisor to check the remaining material.

  As you say, Dell does not list the intervening versions of BIOS with 1.1.4, 1.1.10, so unless someone at Dell or in the Dell forums can tell you what "improvements" in your version or with your version 1.1.10, you have no way of determining that. Based on omissions, I think there were only minor changes in these versions.

  Normally, I would leave the BIOS alone.  Note, however, that Dell "recommends" 1.1.10 be installed because
  The update contains improvements or changes that will keep your system current and compatible with other system modules (firmware, BIOS, drivers and software) software.
  If you want to stick with XP, I would leave the BIOS alone. If you want to install Windows 7 (assuming that there are Windows 7 drivers for all your hardware), I would Setup 1.1.11.  Be sure to read and follow instructions carefully.

  BTW, it's a little surprising that you only have a 80 GB drive.  CNET review of the Dimension E521 said he came with a 320 GB drive.

• 7130e upgrade OS version question

  Hi guys.

  Can you give the link to upgrade version OS 4.2.1 or 4.2.2?

  My BB model is 7130e.

  Thanks in advance.

  Visit this link for more information on the update of device OS: http://tinyurl.com/y8qs5s

  You can install software from another operator wireless device if there is any software device for your operator.

  It's an off-topic here.

  After these questions in this section of the forum:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=Other_devices

  or here:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=BlackBerryDeviceSoftware

• upgrade cpu XW8600 question

  I have a xw8600 works two Xeon E5420 processors, an EVGA GTX580, 1 SSD, 2 HARD disk, 16 GB of RAM 3 GB and 2 scanners on the power graphics card standard 800 watts.   Currently, all readings of temperature I can access are in the normal range.

  I'm considering upgrading processors X 5460 Xeons.  Is it possible to determine if the 80 extra watts needed running the Xeons X 5460 will be an overload of the power of 800 watts power?

  First of all, load the latest version of the BIOS for the xw8600 if you have not already done this.

  You run two TDP max 80 Watt processors, and X 5460 are each 120 watts.  The amount of material you have xw8600 is not excessive, and your food will manage this total 80 watts extra without problem.

  You'll want to read on the 'performance' radiator/fans for these processors power more high... aka "double-height' we talked about here.  Search for both terms.  Double coconut trees have two fans, a little different wiring and better cooling capacity.  They make more noise, of course.  Speaking of which, on my xw8400 my fan base speed up when I am with 16 GB of RAM, but not with 12 GB.  Here is a link to my previous post on the "large double" thermal performance heat sink / fan xw8600 and use of it in a xw8400.  There is information here that is worth reading:

  /T5/workstations-z-series-XW-series/XW8600-performance-double-tall-fan-modification-for-xw8400/m-p/5846271#M13965

  Lets say you really just want the zip but aren't going to be hammering those hard processors.  You probably could if away with sticking with your original radiator/fan and first watch your time QuadCore with HWMonitor (free) for you ensure that your workload does not heat stress while get you an idea of how things are going.  It is clear from previous work on the wiring for a project xw8400 that adding a shunt sense rpm 3-Socket 5 plug wire would be how to usurp map mother xw8600 thinking that it was a 'performance' heatsink thermal / fan installed.  It would be to see RPM sense data for both fans of radiator/2 double height of Socket 3 and 5 this way, which is what a xw8600 wired in peripheral stock provides.  The motherboard can recognize that a higher power processor has been installed.  Alternatively, just buy two of the double coconut off eBay.

  X 5460 on eBay are about 140.00 for two, used and you want the latest sSpec code which is SLBBA.  Furthermore, you cannot use the processors that do not appear in the BIOS firmware, and you see the list of the latest version of xw8600 QuickSpecs.

  Given that Intel sells about 1250.00 new X 5460 with this code sSpec each sounding like an eBay project.  Search eBay under "SLBBA".

  I have a xw8400 I upgraded to 2 x X 5365 Quad-cores, also 120 watts max TDP, and fans of heatsink of heat/2 high double devices did not exist for the xw8400... so I got a xw8600 double height and a large single and did the mod wiring posted on the forum here to reproduce the wiring diagram of the xw8400 (different from the the xw8600 wiring diagram).  The processor under the single large turn a bit warmer than under the double height, but not by much.  I did run them simultaneously for months, no problem.  There are pictures and much more in this post.  So personally I would like to experiment with the great one more rider RPM wire 3 to 5 first approach and use type xw6600/xw8600 heatsink / fan already appropriated you.

• Satellite L755: Win 10 upgrade and good question

  Hello

  I have two problems with my computer laptop is satellite L755-M1KQ,.

  My first question is, can I download windows 10 on that?

  my number is PSK2YE-0KQ02UAR

  My second problem is the noise in my laptop is not working, not always just some time, please help me.

  Of course you could improve the system of Windows 10.

  The material is strong enough to manage 10 Windows.
  But Toshiba does not provide drivers Windows 10 for this series... so it might be possible that some features of the laptop (keys FN, etc.) would not work properly...

  With regard to the sound:
  You did not provide many details and if the issue cannot be reproduced, then it will be very difficult to find a solution...
  I think you should check if the sound issue is displayed using the headphones or speakers only... also check if you can update the audio driver...

• Upgrade processor to question 6100 speed

  Hi, I have a Sat Pro 6100 and currently my processor is powered by: -.
  Manufacturer: Intel
  type: Mobile Intel® Pentium® 4 Processor - M
  Clock speed: 1.8 GHz
  Front Side Bus: 400 MHz
  level 1:12 KB cache
  2nd level cache: 512 KB
  Basic voltage (AC): 1.3 V
  coprocessor: integrated processor
  system bus: PCI

  I would like to spend at least 2.8 Ghz
  I need to know what is compatible with my computer.
  Can I use a Mobile Pentium 4 processor or do I have specific one I use now is the symbol of the M?
  http://www.Intel.com/products/notebook/processors/index.htm
  I was looking at this page
  http://processorfinder.Intel.com/scripts/list.asp?ProcFam=826
  and it seems that the highest speed processor for
  Mobile Intel® Pentium® 4 - M processor
  is clocked at 2.6 Ghz, can't exceed 2.6 Ghz?

  I am interested in this specification, and you know if my computer will work with it?
  Processors Intel Mobile Pentium 4

  Specification number
  sl726
  CPU frequency
  String CPUID 3.06 GHz
  0F29h
  Type of package
  478 pin PPGA Core Voltage
  1,300
  Bus speed
  Thermal guideline at 533 MHz
  606
  Building base
  D1 Spec thermal
  100? C
  L2 Cache size
  Manufacturing technology of 512 KB
  0.13 micron
  L2 Cache speed
  3.06 GHz Bus/core ratio
  23
  Technical update
  http://developer.Intel.com/design/mobile/MP4p/documentation.htm

  OEM order code
  RK80532GE083512

  Notes
  --------------------------------
  Finally I would like to ask what are the benefits of upgrading the speed of the CPU on my PC?
  Thank you

  Post edited by: rachelrising

  Hello

  I'm sure you have lots of experience with desktop computers, but the construction of portable computers is completely different. The unit for mobile notebooks hardware configuration has been designed as economy of space. Please don t get me wrong, but there is no way to do it yourself.
  It is very important that the CPU is connected to the motherboard using a permanent connection method.

• Upgrade 8 window question

  Can I upgrade to W8 of XP on this machine, model D150 aspire one. Adviser says upgrade I need NX in the bios it doesn't have. I have the latest version of the bios installed.

  Windows 8 upgrade offers to the page:

  http://us.Acer.com/AC/en/us/content/Windows-upgrade-offer

  The Aspire One D150 is not listed as supported a system.

• XPS 8300 GPU upgrade with parts question

  Hey all,.

  I'm looking to upgrade my GPU without having to touch my food or any other room in my XPS 8300. I am running with processor i5 to 3.00 GHz, 16 GB RAM and 1 TB harddrive (from what I remember off the top of my head since I'm at work). I read in many places that GTX 750 it would be a fine upgrade without having a problem of PSU or of the motherboard, but before buying, I thought I would ask if everything would be fine without compatibility issues. The link here is the card I have planned to go with, but wanted to know if there is all the more powerful cards out there that I can possibly use. I always use my AMD HD 5450 stock card that's why I'm planning an upgrade. Any help would be greatly appreciated.

  Anthony

  This is the best that I've seen reported on our power 460w.

• CUCM 6.1.5 upgraded to 10 - question about EGGS

  I implement a BE6K and migration of servers MCS. I have used CUCM 8 model OVA to install 6.1.5 and restore from DRS.

  Once I finished the upgrade to 10 initially, do I need to change the RHEL version 6 in the OVULES after stop virtual machines down to switch versions?

  I know I have to do an upgrade of jump and once I go to 10, make a backup of the DRS, then install the fresh version of CUCM 10 with the correct OVA and restore.

  Jump upgrade is supported ONLY if you are upgrading to 9.1 2, no other version.

  + 10.x, migration of PCD replaces the upgrade of jump.

  And Yes, after the installation in place, you change the operating system, only, assuming you are upgrading from a version supported on ESXi.

• The upgrade to vCenter Question DB

  I'll create a new server vCenter for v5 instead of upgrading my current v 4.1.  The Act of installing vCenter 5 and say things to use my current DB upgade the DB?  Or do I need to upgrade my vCenter 4.1 for the DB upgrade, and then create the new server and that it points to the DB?

  No, you do not have update the vcenter server - when you connect the vCenter Server 5 to the existing database, he will see the database must be updated.

• Upgrade to vCenter Questions?

  I know it is without doubt a debate on this topic so sorry to ask again.

  We would like to improve our current VICenter to vcenter box 4 without upgrading our ESX host 3.5 to 4 than at a later date.  VCenter reach 3.5 host?  Is - this everything what we need to know in advance if go us this route?

  Thank you

  Kris

  Nope,

  Just follow the doc

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_upgrade_guide.PDF

  The upgrade of the VC is recommended

• Dimension 2400 - two upgrades and two questions/problems

  So finally had time to update this old thing.  Did some research and found what was compatible. Bought a ram and a video card. Now since their installation for the most part unsuccessful I have questions:

  RAM

  I bought a 2x1GB corsair because I read that 2 GB is the maximum computers. When I install both the computer refuses to start, but with one of the privateers and the original dell computer piece works very well (and much improved, I might add). Every they say 1024Mo, if that helps. also do I need to update the BIOS? After the installation, read this should perhaps have been made beforehand.

  VIDEO CARD

  I also bought the nvidea gforce 5500. I followed the instructions to a T with respect to disabling the dell one printer and changed the setting to the start screen.  Then after installing the card and rebooting the machine, I get nothing on the screen.  I read somewhere that this could be a prob of resources? not sure why tho since this thing is also supposed to be compatible.

  OK thnx in advance everyone, sry if they were invited to a million times, but I don't see all the answers that helped me understand how to go about fixing these issues.