upgrade from trial in an infinite loop trying to upgrade Mac Pro

Similar Questions

• Upgrade Mac Pro 3.1 2016

  Hello

  y at - it a favorable upgrade I can give my Mac Pro 3.1?

  so far I've always been running OS X 10.5.8

  I had to install 10.7 on a pny cs1111 ssd that I need to fix my old system, which worked.

  I had problems with upgrade of equipment due to software that I wasn't ready to upgrade, because it worked very well (which was not supposed to change).

  I read through many threads, but could not yet conclude what options to take advantage of, for the upgrade of my Mac Pro.

  SSD are safe to use now? Fact sorting am function work.

  Another question, I upgrade, I use a yamaha 01 x, which seems to run 32-bit. Found the button hold 3 and 2 the solutions for this, which is very good for me, rather than invest in getting even an equivalent sound device.

  Logic Pro seems to be evolving all the way, I'm still working on OS X 10.7, which I am trying to use because of the TRIM function I need to run the DSS, as far as I figured out.

  I read also on the most recent raid card technology that might just make my i / o really fast, but then again I live in Germany and I can't seem to find the mini das extension cable here in stores, to actually connect it right.

  I read most of the threads upgrade, do not give conclusion, if the upgrade actually working stable for more long, which is my goal.

  I want my Mac to become more course (trying to find the best bad solution too) and more fast.

  BTW. I have especially aktually work with Adobe cs products and Logic Pro.

  I hope that it is still logical. And I'll answer any question that might help my quest, in case I forgot to mention the necessary details.

  Maybe there are threads, I missed, so please post a link if you know. Most of them were who says now. I would get a solution from 2016, if the whole thing is.

• Upgrade Mac Pro early 2009 - new graphics card

  Hello.

  Ive inherited an Early 2009 Mac Pro - specs below - and would like to upgrade the video card for video editing. (Im trying to run DaVinci resolve 12).

  I can't find any more recent discussions in responses since 2013 so thought Id ask again. These answers described an "ATI Radeon HD 5870 Graphics Upgrade Kit for Mac Pro (mid-2010 or early 2009)" which I think is no longer available.

  Can someone help me identify a card that works in my machine - I need more than 2 GB of memory on the new GPU

  < personal information deleted by host >

  New and used for early graphics card Mac Pro is available on eBay.

  d-4-Mac-Pro-3-1-4-1-5-1-/181930743635?ha http://www.eBay.com/ITM/genuine-Apple-ATI-Radeon-HD-5870-1-GB-graphics-video-car...

  http://www.eBay.com/ITM/AMD-Radeon-R9-280X-3GB-graphics-video-card-for-Apple-Mac - Pro-4 K-2009-2012 221949039671-/? hash = ite...

• Upgrade Mac Pro 2006 to 2008 by replacing the Logicboard

  I'm trying to make the best use of a MacPro 2006 my home late and need a better CPU and PCI-E bus.

  Someone has updated a MacPro 1.1 (2006) to a MacPro 3,1 (2008)?

  From what I understand, the basic material is the same, except logical Board, sinks of heat installation of memory and CPU cards. Everything else, like the PSU cage, chassis and memory and the fans seem to be identical. Can anyone confirm this?

  Thank you.

  It will be cheaper and much easier to buy a used Mac Pro set and sell your existing one.

• Ask for help upgrade (Mac Pro early 2009 2x2.6 GHz Quad-Core)

  I am a videographer who has need to bring my Mac Pro from the dead. Cheesy with video files, but not parts of. My reading so far led me to look at in what follows. I'm looking for a better understanding of each of the following items and upgrades are beneficial and worth that may be too kill for a round of aging.

  1. Memory. I currently have 4x2gb or total of 8 GB of ram. I know this is ridiculous, I have not increased by at least 16 GB so far. However, I have read that memory can only help so much and that some of the items here are actual speed thrusters. How much memory is recommended for this configuration? Should I buy? http://www.Amazon.com/16GB-DDR3-1066-PC3-8500-1066Mhz-Apple/DP/B0098MLFJG/
  2. Solid State Drives. I currently have 3 disks internal thatrange of 500 GB to 2 TB. If I used that as my boot drive, where is the best place to install (see photo below)? I read of people installing in a Bay SATA HDD or SATA optical drive unused. I read good things about it. http://www.Amazon.com/Samsung-2-5-I...p/B00OBRE5UE/ref=cm_cr_pr_product_top?IE=U TF8
  3. Video/graphics card. First of all, both mean the same thing? Are the belowonly of slots PCI Express 4 for this type of card? Also, can you have two installed? I have the NVIDIA GeForce GT 120 512 MB series. What is the best way to upgrade? My research so far has led me to the GeForce GTX680. Looks like I'll have to buy it was good. T7ZS http://www.Amazon.com/EVGA-GeForce-DisplayPort-Graphics-02G-P4-3682-KR/DP/B00C81
  4. Processor upgrade. I'm intimidated by it due to intensive installation and prices. What would be the next best bet - upgrade to 12-core? Where to buy?
  5. Firmware? I've seen videos and forums on (4.1 - I) (5.1) or (6.1). I don't really understand what that means. Should I be concerned?

  

  Thank you!

  -The fastest drive is a blade of base PCle SSD. Very very fast

  The SSD to 'Classic' Mac Pro training

  -The bus SATA on the Mac Pro is only SATA II (3 GB/s) and connected to the bus SAT SSD is therefore limited to speed SATA II, not the speed of current SATA III (6 Gbps) drives.

  -You can get cards PCle who accept the standard SATA SSD and who can get speeds of SATA III

  -You can install several graphics cards. I have my 2009 MP, I have the original GT120 in slot 2 and a 5770 PC card into slot 1 (slot width double only).

  A graphics for PC cards will not display anything while booting, as well as an installed PC card can be used for the Startup Option or special start-up as recovery mode.

  For more information on graphics cards:

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://www.macvidcards.com/index.html

  http://forums.MacRumors.com/showthread.php?t=1440150

  -J' would upgrade not processors. Frequently reading and writing to disk is the bottleneck.

  About the firmware, you can update the firmware of the 2009 to 2010 MP. Which allows the use of faster memory, using a processor six cores and audio mini displayport for the graphics card offline

• Upgrade Mac Pro 12 5.1 GPU core

  Hello

  I do most of my work in AE CS6 and CC, video edit in PP and use C4D. I want to upgrade my GPU and can't seem to find the right info. Should I use a 680 GTX or a Sapphire HD AMD 7950? I do not use Ray-Tracing in AE. I'm looking for a fluid workflow with a better overview and hoping for the best render time. I enjoy the CUDA or invest in an AMD? So much info out there. Thanks a lot for your help.

  Mac Pro 5.1 12 core 2.4 gHz

  OS X 10.8.5

  32 GB of RAM (planning on adding more)

  
  

  Operating system and applications on OWC Accelsior_E2 PCI Express SSD

  SSD for cache

  Work on an SSD through my PCI Express eSATA 6 G
  

  Download the Nvidia card as Cuda surpasses open right now CL with Adobe. AE will not use the GPU accept with Ray Tracer and has NVIDIA. Creating will use the GPU and Cuda is what you want to do this right now. I also suggest looking at Octane of C4D index, since it is the GPU for C4D render engine.

  Eric

  ADK

• infinite loop trying to buy

  When trying to register for the annual plan of paid monthly photography I am sent in a loop to enter my card details after confirmation of. No error message, just send at the beginning again.

  Trying to register from Japan, with a VISA card.

  A way to solve this problem, or at least to know what is the problem?

  To place the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• HP 8710p BIOS could not update - now infinite LOOP - trying to find - please help!

  Hey all. I've updated my friends to f.20 bios system - and it now appears that the bios update failed, and then it restarts.

  It is an endless loop - which never lets me boot in windows - so I can't go back to a previous version of the BIOS.

  I have read around forums and discovered a method to try an emergency recovery by getting the rompaq bios and by holding down the Windows key + B when I turn on the system.

  Just buy an external USB floppy drive to try this emergency recovery.

  I tried the USB - but it wouldn't work.

  I get different results here - but not what I want.

  With the USB floppy plugged: when I press Win + B - seeing traffic flashes so far much more time, looks like it initializes the floppy drive (green light comes on for a moment) - but then nothing - just flashing caps lock for a little and then finally a restart again in the fate of loop. It never appears to start to read the diskette or find a bios file.

  What I am doing wrong? What can I try? The disc must be leabeled a certain way? Should it be renamed my BIOS file?

  Any help would be GREAT!

  I had a very similar experience.  Here is how I fixed it.

  Download sp41954.exe hereor search for it.

  Double-click the file to launch the application.  If you use Vista or later, close the program, go where he extracted (C:\swsetup\sp41954) and search for the FirmwareUpdater.exe file.  Right-click on the file and select Properties.  Click on the Compatibility tab and select "run this program in compatibility mode for: Windows XP (Service Pack 3).  Open FirmwareUpdater.exe and create a startup disk.  If you are using XP, you can create the sp41954 startup disk directly.

  Turn the laptop off.  Connect the floppy drive USB with the newly created on the portable computer diskette.  Hold all four arrows while turning on the laptop.  Continue to hold down the four arrows until you see the num-lock or flashing caps lock key (don't remember which).  He should be reading the disk.  After a minute or two, the laptop should restart and operate normally.

  When I did, I disconnected the laptop and removed the battery.  I don't know if it was necessary to remove all or not.

  I hope this helps.

• After the upgrade from trial to the monthly subscription, I have the Adobe Pro crashing whenever I open it, with a note "Acrobat quit unexpectedly. How can I make it work?

  Hello

  Can someone advise how I can do my job Adobe Pro? Now it it gives me a note 'Adobe close unexpectedly' every time that I run. I have it on iMac. The trial version worked without problems, glitches began after I purchased a monthly subscription.

  Thank you in advance.

  If you are on Windows, I'd go to control panel > programs & features and do a repair.

• Infinite loop of "Failure to configure Windows updates" Windows 8

  Hello

  Recently, I completely reset my laptop Windows 8. After reset, I installed all the updates (there were about 90) and restart as prompted. However, now the PC is stuck in an infinite loop trying to configure the updates, or configure them, then reboot and try again.

  Like I can't pass the configuration screens, I can not troubleshoot or do anything since the PC itself and it's very frustrating and I don't know what to do.

  Hello

  This problem might have occurred because of these reasons:

  1 external.

  2. bad Windows Update settings.

  3. conflicts between third party applications.

  I suggest to start the computer using safe mode and then attempt to perform the steps in the article.

  Step 1: Start the computer in Mode safe.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Step 2: Try the steps outlined in the article.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note:

  1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  2. Please do not perform upgrade in-place or reinstalling Windows.
  3. After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  See the article for more information.

  Problems with installing updates
  http://Windows.Microsoft.com/en-in/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite C660 stuck in an infinite loop of BSOD after upgrade to win 10

  Wow what a disaster, this is a machine under windows 7-32 bit Satellite C660 PSC1GA-01E01M stuck in an infinite loop of BSOD.

  The lappy said that it was ok to upgrade to windows 10 so... Yes, I did.
  Now its stuck in a loop without end of BSOD.

  So I decided to use the recover option and reinstall windows 7 and then move from there.
  After mega downloads updates and finally got to the stage where there was no update on the left to get, so I decided to upgrade to windows 10 even once.

  Now stuck in an endless loop of BSOD again.

  Can someone point me to the driver who is a failure, I can get into SafeMode ok, Device Manager has 2 problems

  (1) is under OTHER DEVICES is an unknown device
  (2) is generic pnp monitor

  I tried from Toshiba Web site for updates of drivers for 32-bit windows 8 thinking this could be the best step but the links are bad and the page Web said sorry loser at home...

  Also no network, if I try to logging for the safe mode with networking, he returned to the screens of BSOD...

  HELP PLEASE

  Toshiba has released a list with all Toshiba models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Satellite C660 PSC1GA is not in the list, which means that this model is not supported to win 10 and will not get win 10 drivers.

  However the Win 10 must run on this device, because it meets the essential physical requirements.

  I guess the BSOD loop arise due to some drivers which are not entirely compatible Win 10 and probably these drivers must be removed before making the Win 10 update.

  To check the compatibility follow this procedure:

  • Right-click on the icon 'Get Windows 10' (on the right side of the taskbar), then click on "Check the status of your upgrade".
  • In the app to get Windows 10, click on the menu: (3 lines) and then click on "Check your PC.
  • Now you should see the list of compatibility issues

  Also this kind of problem could be fixed by Microsoft update, as mentioned in this article:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• How to cancel my membership stock "free"? Infinite loop of trying to figure out how to cancel a nonsense!

  So before the end of my 30 day trial, I went to stop my subscription via the button "Cancel my subscription" only to take through an infinite loop of menus 'contact' and 'help '. I've been frustrated as hell, and incredibly busy without time to deal with it I put it off for a few days. Now, I was charged for an extra month of Adobe Stock and I'm really tired. The loop of impossible "contact options" finally took me here as my only way of contact? I need to cancel it immediately and be reimbursed for the extra month that I didn't. The chat option is closed, and phone number isn't me to go anywhere.

  It is obvious that Adobe makes it as difficult as possible for people to cancel the free trial period. I'm usually reluctant to enter credit card information when it comes to "free trials", but I thought I could trust that Adobe would make this easy. It is not the case. Far from it.

  
  

  Help, please.
  

  
  
  

  Hi April

  I've cancelled your Stock plan.

  Thank you

  Bev

• Upgrade from trial to purchase. The country's problems.

  Hello!

  Trying to upgrade from trial to purchase. It does not allow me to say if its not available in my country. I am a student so I made my account home to Puerto Rico, but I'm studying in Savannah, Georgia. They are available in both places. I am buying in Savannah, he won't allow it. I don't know what to do. Someone knows what to do? Thank you!

  Hello

  Please see change the country associated with your Adobe ID

  Otherwise, you can contact adobe sales to place an order.

  Contact us | Adobe

  Kind regards

  Sheena

• I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003.

  I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003. I have a Microsoft Office 2003 CD and when I try to download I get a message saying "necessary install file YS561401." CAB is not found! " I've been going around in circles ALL day! Can someone please help me!  When I try to put automatic updates for my computer, I get this message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"- none of these options helped me at all! I even tried to download "Silverlight" (as recommended) and get a message ID: 1511 - "install missing Windows, downloading Windows update components! ARRRGH!  During the day, I also received error 0 x 80244019 and error 0 x 80240036. What is going on???

  Hi Kenny_47,

  There is no XP, 2003; If you want to upgrade your XP SP2 to SP3, download it here:-http://www.microsoft.com/en-us/download/details.aspx?id=24
  I suggest to install the following updates before installing XP SP3:
  1. Windows Installer for XP from:-http://www.microsoft.com/en-us/download/details.aspx?id=8483
  2. Download and install the Windows Update Agent: http://support.microsoft.com/kb/943144/en
  You are using an original CD of Office 2003?

• Has managed to recover from the infinite loop restart Vista SP1 "configuration updates stage 3 of 3 0%"- but Windows Update always wants me to install Vista SP1!

  WIndows Update asks me to install Vista SP1. I did and got into the infamous infinite loop of SP1 (infinite loop ' configuration updates stage 3 of 3 0% "with Vista SP1). I used F8 to repair my computer, and I chose a restore before the SP1 update point has been installed. The restore point has been applied successfully, so I have the computer in the back. Super. However, Windows Update wants me reinstall Vista SP1. Needless to say, I am reluctant to do so. But I want to be aware of the Windows updates. What do I do? TIA

  (With the help of Vista Home Premium)

  This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. right click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. ensure that the http://support.microsoft.com/kb/955430 and http://support.microsoft.com/kb/947821 have been installed. (If they were, they would belong to installed updates. If they don't, try to manually download/install.

  6 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft