upgrade path for 7000CTO ZD

Similar Questions

• Upgrade paths for vCenter Server 4.0/32-bit to 64-bit/5.0

  So, for various reasons beyond my control, when we installed vCenter server when we migrated from 3.5 to 4.0, it has been installed on 32-bit Windows.

  Data backended by a full instance of SQL Server (not the MSDE version that comes pre-packaged with vCenter).

  So, I try to understand the strategy of less impact for the trip to 5.0.

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  If I had to, I guess, we could install vCenter 4.0 (64-bit) on the new host and THEN perform the upgrade, if it was really important, but I somehow don't think it is.

  Once that is done, we would eventually just make a backup/restore type upgrade path to move data out of the old host and the new host and re-point vCenter Server in its local database now.

  A that someone does something similar to this? Traps, we should be aware of? Warnings that it would never work the way we expect it to be, etc, etc. ?

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  That's what I'd do.  It your DB is remote, it is a fairly straightforward upgrade.

  1. turn off your old Instance vCenter

  2. backup your DB instance

  3 copy the SSL directory off the old vCenter and the new (you'll probably to manually create the path, before installing vCenter)

  4 set up your ODBC connection and test

  5. install vCenter and use existing DB

  Assuming that you are going to use the same host name and IP address for your new instance of vCenter, like your old, all stocks will be as it was before the upgrade.

• Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

  Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

  I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

  I also tried to use the Sony system recovery CD, but it does not work.

  Help!

  Hi IAMSOBZ,

  As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

  Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

  a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

   

  Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

  c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

  d. read the Microsoft software license agreement and press F8.

  e. Setup will scan for previous Windows installations

  f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

  g. complete the installation

  You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IDRAC6 upgrade path

  I am temporarily caring for a Dell PowerEdge T610 purchased in 2012.  Our outsourced IT Department walked me through some maintenance tasks, including required launches a Virtual Console through iDRAC6. Apparently my iDRAC6 version (V1.80) is so old, no modern browser it supports fully. What I have for the most part works with Chrome and FireFox, not IE (but it's OK - I don't work with IE either).

  I am trying to determine if a firmware upgrade path exists for my hardware, and if so, what are the steps. None of my research on the Dell Web site have meaningful results. Since my system is no longer under warranty I don't get a lot of help by telephone, and "cat" is denied for me as well.

  If anyone can point me to a good place to get started which would be a great help.  Thank you!

  Hello.

  See the upgrade below. First apply the BIOS, then the respective DRAC6 firmware.

  6.2.3 BIOS iDRAC6 v1.92                   

  BIOS 6.3.0 iDRAC6 v1.95                  

  BIOS 6.4.0 iDRAC6 v1.97, iDRAC6 v1.99 , and iDRAC6 v2.8.0                  

  The path of update will prevent iDRAC communication and other server issues.

• Upgrade path 5500 series ASA-SSM-10

  Can anyone provide the proper for the 5500 series ASA-SSM-10 upgrade path of

  6.0 (5) E2

  TO

  7.1 (10) E4

  The release notes state that you must run just least 6,0000 e4 could so I just spend 6,0000 E4 5,0000 E2 then directly to 7.1 (10) E4?

  Also, the SSM-10 is able to effectively run the 7.1 (10) E4?

  Hello

  Yes, you can directly upgrade 6.0.5E2 to 6.0.6 E4 and then directly to version 7.1. (10) E4. After the upgrade for the latter, you might even go to latest available patch as well.

  -Yes, SSM1 - is able to effectively execute the 7.1.0E4.

  Kind regards

  Akshay Rouanet

• C / SX / EX / MX upgrade paths

  Hello

  I have been the scene of c20 upgrades via the GUI and CPC, 4.x > 5.1.1 > > 7.3.2 7.1.1 hopping. 3rd party support told me that this is the way to upgrade the C20s.

  I struggled to find any documentation to confirm this upgrade path to 7.3.2. I'm about to proceed to the upgrade C40s and 60 with SX / EX / models MX.

  I'm looking for the validation of the document confirm how best to spend to 7.3.2 on all of the above models.

  I looked at the release notes do not seem to talk about any version of jump requirement.

  Thank you

  B

  You can go directly to the current version of the TC software without having to jump several releases to get there.  You'll just need to get the keys to unlocking the Cisco Licensing Portal TC7.x and apply it on the codecs, before doing the upgrade.  Applying the unlock key invites you to restart, you can disregard and go directly to download TC as the upgrade to restart anyway endpoint and apply the release key at the same time.

  Note, it is important that you read well ALL the TC release notes for the current version, you have up to TC7.  There are several versions where changes have been made that could be important to you.  Some of these changes are:

  • TC5.x - required serial connection is by default enabled (important only if you use control 3rd party such as Crestron or AMX systems)
  • TC6.x - layouts have changed, especially when using two screens with presentation and selfview.
  • TC7.x - Root access has been removed (I noticed that mention you SCP that requires root access), also instantaneous behavior has changed over the previous day.

• 13.2.2 to 14.5.0 TMS upgrade path

  Hello

  I'm looking to make an upgrade to TMS 13.2.2 we currently have running on an old box of Windows 2003 R2.

  We are looking to set up a new server using 2012 R2 as the operating system.

  The environment:

  Windows 2003 R2

  SQL Express 2005 w/DB hosted locally

  13.2.2 TMS

  TMSXE (on another server) 3.0.2

  The methodology of Migration:

  Migrate the existing database to a SQL server hosted and test all the features

  If it is successful then

  • Remove the old server from domain/network
  • Rename the new server the same as
  • Install the TMS 14.3.0 on the new connection to the existing database server, hosted on the external SQL Server
  • Run the time zone update tool that comes in 14.3.0
  • Update the 14.3.0 existing install 14.5.0

  This methodology seems as if it was the right way to go? There are fundamental flaws, that I don't see here?

  I did this upgrade path in the laboratory successfully using a copy of our existing database, I have no alternative endpoints or vcs-control etc. to connect to the lab to prove everything works after upgrade.

  I look forward to your responses.

  Thank you

  Alex

  Hello Alex.

  You should consider upgrading to TMS 14.6, which is the most recent version.  14.6 TMS notes.

  TMS 14.5 supports only Windows Server 2012, not 2012 R2, but 14.6 done TMS.  Also, if you are not already the case, consider using SQL Server 2012 or 2008 R2 64 bit, to be compatible with future versions of TMS.

  The steps that you listed sounds good, just check on that TMS installation guides for supported versions of WIndows and SQL details, as well as all the required components.

• Y at - it replacement tool path for "Image > adjustments > Variations...» "Photoshop cs6 more Standard?

  Y at - it replacement tool path for "Image > adjustments > Variations...» "Photoshop cs6 more Standard that brings similar results?  I was used to using Image > adjustments > variations of Photoshop CS4 Standard Standard more often. I've upgraded to Photoshop CS6 additions assayed for the compatibility of architecture memory 64-bit on my Macbook Pro, started in Mountain Lion.  I see now that Photoshop CS6 Addition Standard has the "Image > adjustments > Variations...» "removed toolpath.

  I do not have Photoshop CS6 extended, which has the new Image > adjustments > variations... toolpath.  I only have Photoshop CS6 addition so if someone can share with me a substitution toolset that can give me results similar to the use of the old "Image > adjustments > variants...," I'd appreciate it.

  As far as I know, Variations has been removed from the service standard/extended cs6 photoshop and photoshop cc on the side of mac

  (versions of windows still have the command variants)

  You can use the levels instead of variations.

• Need to define new paths for assets in organization CS6

  Windows 7 Home. Just installed CS6 Production Premium CS4 optical disc upgrade. Downloaded all the 1.7 GB updates and all the applications are enabled.

  When I opened body he came without listing all of my body CS4 projects. When I click on one of the organization files I get messages saying that it is an old version and must be updated. I click ok but problem not solved. I changed the paths for assets used in CS4 projects and wonder if this is the problem. How to upgrade the CS6 projects in new ways?

  Do not change the paths before you open your old project with CS6.

  CS6 will ask you if want to convert old project again.

  Say Yes and enter a new location and a name.

  When you click ok, all assets will point to new project.

  

• Adobe Reader 8.1.7 upgrade path?

  Could someone please explain the upgrade path to Adobe Reader 8.1.7 for me? I read the tech note "Adobe Acrobat and Reader to date and deployment information" and I am still a little uncertain.

  Our most currently deployed version is 8.1.6 but some of our users still have older versions (8.1.2 ~ 8.1.5) installed. I've been distributing Adobe Reader via SMS 2003 from version 8.1.2 as below:

  8.1.2 - customized using Adobe Cusomtization 8 (Setup.exe /sPB /rps /rs) Assistant

  8.1.3 - customized using Adobe Cusomtization 8 (Setup.exe /sPB /rps /rs) Assistant

  8.1.4 - straight (number installAdbeRdrUpd814_all_incr.msp! /norestart)

  8.1.5 - right installation (number AdbeRdrUpd815_all_incr.msp! /norestart)

  8.1.6 - right installation (number AdbeRdrUpd816_all_incr.msp! /norestart)

  So, what is my upgrade for Adobe Reader 8.1.7 - right installation path (number AdbeRdrUpd817_all_incr.msp! /norestart) or do I need to customize using Adobe's Assistant to keep the desired settings? Appreciate any advice anyone can offer. Thank you very much.

  Adobe Reader 8.1.7 patch can be applied only to 8.1.6. Then first you must bring all your systems to 8.1.6 and then apply 8.1.7 patch.

  Custom settings do not download if you install 8.1.7.

  If you have a system with 8.1.3 or 8.1.4 or 8.1.5 so that-

  Apply 8.1.6 patch--> Apply 8.1.7 patch

  If you have a system with 8.1.6 then do-

  Apply 8.1.7 patch

  If you have a clean system, then the shortest is to install the reader 8.1.7-

  Install Reader 8.1.6 Apply patch 8.1.3-->--> Apply 8.1.7 patch

  NOTE: Reader 8.1.3 is an install (msi) full 8.1.6 and 8.1.7 are patches (msp).

• How to specify the path for ar, gcc, etc...

  Hello
  
  According to Metalink Note: 416305.1 : Installation of oracle Applications and Notes of version 12 (12.0.4) for Linux (64-bit) upgrade
  
  Software requirements
  The following maintenance tools must be installed on all machines and their locations specified in the path of the account running a quick installation and the path on accounts that will hold the database layer and the application layer of file systems. (For all the Linux 64-bit operating systems.)
  
  AR
  CCG
  g ++
  Mrs.
  LD
  linux32
  do
  X display server
  
  I did not understand this para, please tell me how to specify paths for these tools.

  Hello

  You must make sure that you can run these commands. Find the files and verify that the path is set your path.

  To check your current path, issue of "echo $PATH".

  To add a new path to your current path, issuing "export : $PATH.

  Kind regards
  Hussein

• How can we customize filename/path for the files you want to download?

  Default path for saving downloaded files is (in my case) "/ storage/sdcard0/Downloads."
  File name by default is seems to be the name of the original file.
  How can we change these settings?

  THX

  By default, Firefox for Android uses the Android downloads folder because its default download location. You can change this as follows.

  Change the download location on Firefox for Android, please visit the topic: configuration preferences editor. You need to change two different settings to make this work.

  First, you must know the path of the folder to use. An application like ES File Explorer file manager will be useful if you do not have a file manager.

  (1) open a new tab with about: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type down and press enter

  3 scroll to browser.download.folderList and tap on modify, then change the value from 1 to 2 (from 'by default always' to the 'last used folder'). The change should appear after a few seconds.

  (3) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference should be browser.download.dir (this option stores the last used directory)

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value is based on the folder you want. For example:

  / sdcard/FxDown
  (D) then click on create (if you are too slow, it can erase and you will have to start)

  If you go back to your other tab and download something, it should go to the new folder.

  A little luck?

• Is Kindle for Mac version upgrade available for El Capitan?

  Is Kindle for Mac version upgrade available for El Capitan?

  Contact Amazon's Kindle. They are Kindle owners

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Upgrade memory for Tecra CDT 550

  I have a toshiba tecra 550 CDT laptop with 64 MB of RAM.

  I want to migrate the RAM.

  Memory expansions I could install and what is the maximum size of the memory?

  Thanks for any help.
  Jochen

  Hello

  Well, as I know you can upgrade memory for max 160 MB.
  I found information on this module and it is compatible with your laptop:

  16 MB RAM Part number: PA2039U
  32 MB RAM Part number: PA2043U
  64 MB RAM Part number: PA2044U
  128 MB RAM Part number: PA2054U

  Good bye